Application of Replica Technique and SEM in Accuracy Measurement of Ceramic Crowns

Sapozhnikova, K., Taymanov, R. (2010). Improvement of traceability of widely-defined measurements in the field of humanities. Measurement Science Review, 10 (3), 78-88.10.2478/v10048-010-0014-6Search in Google Scholar

Laghrouche, M., Haddab, S., Lotmani, S. Mekdoud, K., Ameur, S. (2010). Low-cost embedded oximeter. Measurement Science Review, 10 (5), 176-179.10.2478/v10048-010-0030-6Search in Google Scholar

Hreha, P., Hloch, S., Magurova, D., Valicek, J., Kozak, D., Harnicarova, M., Rakin, M. (2010). Water jet technology used in medicine. Tehnički Vjesnik - Technical Gazette, 17 (2), 237-240.Search in Google Scholar

Jevremovic, D., Puskar, T., Budak, I., Vukelic, D., Kojic, V., Egbeer, D., Williams, R. (2012). An RE/RM approach to the design and manufacture of removable partial dentures with a biocompatibility analysis of the F75 Co-Cr SLM alloy. Materiali in Tehnologije - Materials and Technologies, 46 (2), 41-47.Search in Google Scholar

Pilipovic, A., Raos, P., Sercer, M. (2011). Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing - LOM. Tehnički Vjesnik - Technical Gazette, 18 (2), 253-260.Search in Google Scholar

Todorovic, A., Radovic, K., Grbovic, A., Rudolf, R., Maksimovic, I., Stamenkovic, D. (2010). Stress analysis of a unilateral complex partial denture using the finite-element method. Materiali in Tehnologije - Materials and Technologies, 44 (1), 41-47.Search in Google Scholar

Levin, G.G., Vishnyakov, G.N., Loshchilov, K.E., Ibragimov, T.I., Lebedenko I.Y., Tsalikova, N.A. (2010). Modern dental CAD/CAM systems with intraoral 3D profilometers. Measurement Techniques, 53 (3), 321-324.10.1007/s11018-010-9503-0Search in Google Scholar

Witkowski, S., Komine, F., Gerds, T. (2006). Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques. Journal of Prosthetic Dentistry, 96 (1), 47-52.10.1016/j.prosdent.2006.05.013Search in Google Scholar

Sorensen, J.A. (1990). A standardized method for determination of crown margin fidelity. Journal of Prosthetic Dentistry, 64 (1), 18-24.10.1016/0022-3913(90)90147-5Search in Google Scholar

Holmes, J.R., Bayne, S.C., Holland, G.A., Sulik, W.D. (1989). Considerations in measurement of marginal fit. Journal of Prosthetic Dentistry, 62 (4), 405-408.10.1016/0022-3913(89)90170-4Search in Google Scholar

Sulaiman, F., Chai, J., Jamelson, L., Wozniak, W. (1997). A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. International Journal of Prosthodontics, 10 (5), 478-484.Search in Google Scholar

Quante, K., Ludwig, K., Kern, M. (2008). Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology. Dental Materials, 24 (10), 1311-1315.10.1016/j.dental.2008.02.011Search in Google Scholar

Fonseca, J.C., Henriques, G.E., Sobrinho, L.C., de Goes, M.F. (2003). Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium aluminum vanadium copings. Dental Materials, 19 (7), 686-691.10.1016/S0109-5641(03)00014-9Search in Google Scholar

Bindl, A., Mormann, W.H. (2003). Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM generated pertial crowns. European Journal of Oral Sciences, 111 (2), 163-169.10.1034/j.1600-0722.2003.00022.x12648269Search in Google Scholar

Jevremovic, D.P., Ajdukovic, Z.R., Stankovic, S.D., Radosavljevic, R.D. (2012). Profilometric and SEM analyses of composite surfaces after excess cement removal. Hemijska Industrija, 66 (1), 59-66.10.2298/HEMIND110406069JSearch in Google Scholar

Reich, S., Wichmann, M., Nkenke, E., Proeschel P. (2005). Clinical fit of all - ceramic three - unit fixed partial dentures, generated with three different CAD/CAM systems. European Journal of Oral Sciences, 113 (2), 174-179.10.1111/j.1600-0722.2004.00197.xSearch in Google Scholar

Kokubo, Y., Nagayama, Y., Tsunita, M., Ohkubo, C., Fukushima, S., Steyren, P.V. (2005). Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN- I system. Journal of Oral Rehabilitation, 32 (10), 753-758.10.1111/j.1365-2842.2005.01506.xSearch in Google Scholar

Mitchell, C.A., Pintado, M.R., Douglas, W.H. (2001). Nondestructive in vitro quantification of crown margins. Journal of Prosthetic Dentistry, 85 (6), 575-584.10.1067/mpr.2001.114268Search in Google Scholar

Quintas, A.F., Oliveira, F., Bottino, M.A. (2004). Vertical marginal discrepancy of ceramic copings with different ceramic materials, finis lines, and luting agents: an in vitro evaluation. Journal of Prosthetic Dentistry, 92 (3), 250-257.10.1016/j.prosdent.2004.06.023Search in Google Scholar

Nakamura, T., Dei, N., Kojim, T., Wakabayashi, K. (2003). Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crown. International Journal of Prosthodontics, 16 (3), 244-248.Search in Google Scholar

Bindl, A., Mormann, W.H. (2005). Marginal and internal fit of all-ceramic CAD/CAM crown-copings on cheamfer preparations. Journal of Oral Rehabilitation, 32 (6), 441-417.10.1111/j.1365-2842.2005.01446.xSearch in Google Scholar

Nakamura, T., Nonaka, M., Maruyama, T. (2000). In vitro fitting accuracy of copy-milled alumina cores and all-ceramic crowns. International Journal of Prosthodontics, 13 (3), 189-193.Search in Google Scholar

Wolfart, S., Wegner, S.M., Al-Halabu, A., Kern, M. (2003). Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation. International Journal of Prosthodontics, 16 (6), 587-592.Search in Google Scholar

Ryge, G., Snyder, M. (1973). Evaluating the clinical quality of restorations. Journal of the American Dental Association, 87 (2), 369-377.10.14219/jada.archive.1973.0421Search in Google Scholar

Wettstein, F., Sailer, I., Roos, M., Hammerle, C.H.F. (2008). Clinical study of the internal gaps of zirconia and metal frameworks for fixed partial dentures. European Journal of Oral Sciences, 116 (3), 272-279.10.1111/j.1600-0722.2008.00527.xSearch in Google Scholar

Coli, P., Karlsson, S. (2004). Fit of a new pressure-sintered zirconium dioxide coping. International Journal of Prosthodontics, 17 (1), 59-64.Search in Google Scholar

Tinschert, J., Natt, G., Mautsch, W., Spiekermann, H., Anusavice, K.J. (2001). Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Operative Dentistry, 26 (4), 367-374.Search in Google Scholar

Behr, M., Rosentritt, M., Latzel, D., Kreisler, T. (2001). Comparison of three types of fiber-reinforced composite molar crowns on their fracture resistance and marginal adaptation. Journal of Dentistry, 29 (3), 187-196.10.1016/S0300-5712(01)00007-0Search in Google Scholar

Laurent, M., Scheer, P., Dejou, J., Laborde, G. (2008). Clinical evaluation of the marginal fit of cast crowns - validation of the silicone replica method. Journal of Oral Rehabilitation, 35 (2), 116-122.10.1111/j.1365-2842.2003.01203.x18197844Search in Google Scholar

Rahme, H.Y., Tehini, G.E., Adib, S.M., Ardo, A.S., Rifai, K.T. (2008). In vitro evaluation of the "replica technique" in the measurement of the fit of Procera crowns. Journal of Contemporary Dental Practice, 9 (2), 25-32.Search in Google Scholar

Groten, M., Girthofer, S., Probster, L. (1997). Marginal fit consistency of copy-milled all ceramic crowns during fabrication by light- and scanning-electron-microscopic analysis in vitro. Journal of Oral Rehabilitation, 24 (12), 871-881.10.1046/j.1365-2842.1997.00592.x9467987Search in Google Scholar

Todorovic, A., Trifkovic, B., Stamenkovic, D. (2010). Accuracy of ceramic crowns made by optical scanning methods of Cerec® 3D system. Acta Stomatologica Naissi, 26 (62), 977-986.Search in Google Scholar

Pelekanos, S., Koumanou, M., Koutayas, S., Zinelis, S., Eliades, G. (2009). Micro-CT evaluation of the marginal fit of different In-Ceram aluminna copings. European Journal of Esthetic Dentistry, 4 (3), 278-292.Search in Google Scholar