[1. Campbell, K. (1974) Energy basis for collision severity, SAE Technical Paper Series, no. 740565.]Search in Google Scholar
[2. Campbell, L. (1974) Energy Basis for Collision Severity. SAE Paper 740565.10.4271/740565]Search in Google Scholar
[3. Daily, J., Shigemura, N., Daily, J. (2006) Fundamentals of Traffic Crash Reconstruction. Jacksonville, Florida: Institute of Police Technology and Management, University of North Florida.]Search in Google Scholar
[4. Hibbeler, R. (2004) Engineering Mechanics: Dynamics. Upper Saddle River, NJ: Prentice Hall, 10th ed.]Search in Google Scholar
[5. Hight, P., Kent-Koop, D., Hight, R. (1985) Barrier equivalent velocity, delta v and CRASH3 stiffness in automobile collisions, SAE Technical Paper Series, no. 850437.]Search in Google Scholar
[6. James, A., Neptune and James E. Flynn (1994) A Method for Determining Accident Specific Crush Stiffness Coefficients. SAE Transactions.10.4271/940913]Search in Google Scholar
[7. Jiang, T., Grzebieta, R. H., Rechnitzer, G., Richardson, S.; Zhao, X. L. (2003) Review of Car Frontal Stiffness Equations for Estimating Vehicle Impact Velocities. The 18th International Technical Conference on the Enhanced Safety of Vehicles Conference (ESV), Nagoya.]Search in Google Scholar
[8. Karapetkov, S. (2005) Auto Technical Expertise, Technical University - Sofia, Bulgaria.]Search in Google Scholar
[9. Karapetkov, S. (2010) Investigation of road traffic accident, technical commentary on the lawyer. Technical University of Sofia, Bulgaria.]Search in Google Scholar
[10. Karapetkov, S., Uzunov, H. (2016) Dynamics of transverse resistance of a car. Didada Consult – Sofia, Bulgaria.]Search in Google Scholar
[11. Mchenry, R., Mchenry, G. (1986) A Revised Damage Analysis Procedure for the CRASH Computer Program. SAE Paper 861894.10.4271/861894]Search in Google Scholar
[12. Neptune, J., Blair, G., Flynn, J. (1992) A method for quantifying vehicle crush stiffness coefficients, SAE Technical Paper Series, no. 920607.]Search in Google Scholar
[13. Niehoff, P., Gabler, C. (2006) The Accuracy of WinSMASH Delta-V Estimates: The Influence of Vehicle Type, Stiffness, and Impact Mode.” In: the 50th Annual Proceedings of the Association for the Advancement of Automotive Medicine, Annu Proc Assoc Adv Automot Med. 2006; 50: 73-89, Chicago, IL]Search in Google Scholar
[14. Nolan, M., Preuss, A., Jones, L., O’Neill, B. (1998) An Update on Relationships between Computed Delta-Vs and Impact Speeds for Offset Crashes.” In: the Proceedings of the Sixteenth International Technical Conference on the Enhanced Safety of Vehicles (Windsor, Canada, June 1998), Paper No. 98-S6-O-07.]Search in Google Scholar
[15. Owsiański, R. (2007) Szacowanie energii deformacji nadwozi kompaktowych samochodów osobowych (Estimation of the bodywork deformation energy of compact passenger cars). Paragraf na Drodze No.4.]Search in Google Scholar
[16. Prasad, K. (1990) CRASH3 Damage Algorithm Reformulation for Front and Rear Collisions. SAE 900098.10.4271/900098]Search in Google Scholar
[17. Schmidt, B., Haight, W., Szabo, T., Welcher, J. (1998) System-based energy and momentum analysis of collisions, In: Accident Reconstruction: Technology and Animation VIII SP-1319, no. 980026, Society of Automotive Engineers, Warrendale, PA, February.10.4271/980026]Search in Google Scholar
[18. Sharma, D., Stern, S., Brophy, J. (2007) An Overview of NHTSA’s Crash Reconstruction Software WinSMASH. In: Proceedings of the Twentieth International Conference on Enhanced Safety of Vehicles, Paper No. 07-0211, Lyon, France.]Search in Google Scholar
[19. Stronge, W. (2000) Impact Mechanics. Cambridge: Cambridge University Press.10.1017/CBO9780511626432]Search in Google Scholar
[20. Stucki, L., (1998) Fessahaie Comparison of Measured Velocity Change in Frontal Crash Tests to NASS Computed Velocity Change. SAE 980649, Society of Automotive Engineers.10.4271/980649]Search in Google Scholar
[21. Vangi, D. (2009) Simplified Method for Evaluating Energy Loss in Vehicle Collisions. Accident Analysis and Prevention, 41.10.1016/j.aap.2009.02.01219393816]Search in Google Scholar
[22. Wach, W. (2003) Analiza deformacji samochodu według standardu CRASH3. Część 2: Pomiar głębokości odkształcenia (Analysis of motor vehicle deformation according to the CRASH3 standard. Part 2: Measurement of deformation depth). Paragraf na Drodze No. 12.]Search in Google Scholar
[23. Wicher, J. (2006) Energetyczne metody analizy, Scientific and Educational Conference “Development of automotive engineering versus motor insurance”, Radom.]Search in Google Scholar