[
[1] Higgins A., 2000, “Adhesive bonding of aircraft structures”, Int. Journal of Adhesion & Adhesives, No. 20, pp. 367-376.10.1016/S0143-7496(00)00006-3
]Search in Google Scholar
[
[2] Öchsner A., Genger J., 2004, “Critical analysis of the substrate deformation correction in the thick adherend tensile-shear test”, Int. Journ. Of Adhesion & Adhesives, No. 24, pp. 37-41.10.1016/S0143-7496(03)00098-8
]Search in Google Scholar
[
[3] ASTM D5656, “Standard test method for thick adherend metal lap-shear joints for determination of the stress-strain behavior of adhesives in shear by tension loading”.
]Search in Google Scholar
[
[4] Seneviratne W.P., Tomblin J.S., 2011, “Adhesive characterization using NIAR-modified KGR estensometer”, SAMPE Journal, No. 47, pp. 37-44.
]Search in Google Scholar
[
[5] Yang Ch., Tomblin J.S., 2001, “Investigation of adhesive behavior in aircraft applications”, DOT/FAA/AR-01/57 report.
]Search in Google Scholar
[
[6] Da Silva L.F.M., Öchsner A., 2011, “Failure strength tests”, Handbook of Adhesion Technology, pp. 443-471.10.1007/978-3-642-01169-6_19
]Search in Google Scholar
[
[7] Kassapoglou Ch., Adelmann J.C., 1992, “KGR-1 thick adherend specimen evaluation for the determination of adhesive mechanical properties”, SAMPE Quarterly, pp. 19-27.
]Search in Google Scholar
[
[8] Da Silva L.F.M. et al., 2008, “Alternative methods to measure the adhesive shear displacement in the thick adherend shear test”, Journ. Of Adhesion Science and Technology, No. 22, pp. 15-29.10.1163/156856108X292241
]Search in Google Scholar
[
[9] ASTM D1002, 2010, “Standard test method for apparent shear strength of single-lap joint adhesively bonded metal specimens by tension loading (metal-to-metal)” ASTM International, West Conshohocken, PA, DOI: 10.1520/D1002-10.10.1520/D1002-10
]Search in Google Scholar
[
[10] Wiśniowski W., 2014, „XX lat Programu Samolotów Lekkich i Bezpieczeństwa. PSLiB” („Twenty Years of Light Aircraft and Safety Program”), Transactions of the Institute of Aviation, Vol. 236(2), pp. 7-25.10.5604/05096669.1130241
]Search in Google Scholar
[
[11] Kaczorowska E., 2016, „Porównanie metod testowania wytrzymałości kleju na odrywanie dla różnych sposobów przygotowania powierzchni próbek” („Comparison of Methods for Testing the Peel Strenght for Different Methods of Preparation of Surface Samples”), Transactions of the Institute of Aviation, Vol. 244(3), pp. 92-9810.5604/05096669.1222754
]Search in Google Scholar
[
[12] Jaśkiewicz R., Stepniowska A., 2016, „Praktyczne zastosowanie metodyki FAA do przyklejania próbek kompozytowych, do testów kwalifikacji materiału” (Practical Application of FAA Methodology of Composite Specimens Used to Material Tests Qualifications”), Transactions of the Institute of Aviation, Vol. 244(3), pp. 74-78.10.5604/05096669.1222745
]Search in Google Scholar
