Parametric Analysis of Electrochemical Discharge Drilling on Soda-Lime Glass Material Using Taguchi L27 Orthogonal Array Method

[1] Dwaipayan, D., Titas, N., Asish, B. “Parametric Study for Wire Cut Electrical Discharge Machining of Sintered Titanium”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 17 – 38, 2019. DOI: 10.2478/scjme-2019-000210.2478/scjme-2019-0002Open DOISearch in Google Scholar

[2] Pawar, P., Ballav, R., Kumar, A. “Review on material removal technology of soda-lime glass material”, Indian Journal of Science and Technology 10(8), pp. 1 – 7, 2017. DOI: 10.17485/ijst/2017/v10i8/10269810.17485/ijst/2017/v10i8/102698Search in Google Scholar

[3] Goud, M., Sharma, A. K., Jawalkar, C. “A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate”, Precision Engineering 45, pp. 1 – 17, 2016. DOI: 10.1016/j.precisioneng.2016.01.00710.1016/j.precisioneng.2016.01.007Open DOISearch in Google Scholar

[4] Kurafuji, H., Suda, K. “Electrical discharge drilling of glass”, Annals of the CIRP, 16, pp. 415–419, 1968.Search in Google Scholar

[5] Wuthrich, R., Fascio, V. “Machining of non-conducting materials using electrochemical discharge phenomenon – An overview”, International Journal of Machine Tools & Manufacture 45 (9), pp. 1095–1108, 2005. DOI: 10.1016/j.ijmachtools.2004.11.01110.1016/j.ijmachtools.2004.11.011Open DOISearch in Google Scholar

[6] Yang, C. T., Ho, S. S., Yan, B. H. “Micro Hole Machining of Borosilicate Glass through Electrochemical Discharge Machining (ECDM)”, Key Engineering Materials 196, pp. 149 – 166, 2001. DOI: 10.4028/www.scientific.net/KEM.196.14910.4028/www.scientific.net/KEM.196.149Open DOISearch in Google Scholar

[7] Jain, V. K., Choudhury, S. K., Ramesh, K. M. “On the machining of alumina and glass”, International Journal of Machine Tools and Manufacture 42 (11), pp. 1269 – 1276, 2002. DOI: 10.1016/S0032-3861(02)00241-010.1016/S0032-3861(02)00241-0Open DOISearch in Google Scholar

[8] Pawar, P., Ballav, R., Kumar, A. “Revolutionary Developments in ECDM Process: An Overview”, Materials Today: Proceedings 2 (4 – 5), pp. 3188–3195, 2015. DOI: 10.1016/j.matpr.2015.07.11310.1016/j.matpr.2015.07.113Search in Google Scholar

[9] Pawar, P., Ballav, R., Kumar, A. “Development and Manufacturing of Arduino Based Electrochemical Discharge Machine”, Journal of Machine Engineering 18(1), pp. 45 – 60, 2018. DOI: 10.5604/01.3001.0010.882210.5604/01.3001.0010.8822Open DOISearch in Google Scholar

[10] Pinar, A. M., Uluer, O., Kırmaci, V. “Optimization of counter flow Ranque–Hilsch vortex tube performance using Taguchi method”, International journal of Refrigeration 32 (6), pp. 1487 – 1494, 2009. DOI: 10.1016/j.ijrefrig.2009.02.01810.1016/j.ijrefrig.2009.02.018Search in Google Scholar

[11] Basak, I., Ghosh, A. “Mechanism of material removal in electrochemical discharge machining: a theoretical model and experimental verification”, Journal of Materials Processing Technology 71 (3), pp. 350 – 359, 1997. DOI: 10.1016/S0924-0136(97)00097-610.1016/S0924-0136(97)00097-6Open DOISearch in Google Scholar

[12] Kulkarni, A. V. “Electrochemical spark micromachining process”, In: Micromachining Techniques for Fabrication of Micro and Nano Structures, InTechOpen Publishing, pp. 235 – 252, 2012. DOI: 10.5772/3103910.5772/31039Open DOISearch in Google Scholar

[13] Kulkarni A.V. “Electrochemical Discharge Machining Process”, Defence Science Journal 57 (5), pp. 765 – 770, 2007.10.14429/dsj.64.1812Search in Google Scholar

[14] Furutani, K., Maeda, H. “Machining a glass rod with a lathe-type electro-chemical discharge machine”, Journal of Micromechanics and Microengineering 18 (6), 065006, pp. 1 – 8, 2008. DOI: 10.1088/0960-1317/18/6/06500610.1088/0960-1317/18/6/065006Search in Google Scholar

[15] Kudla, L. “Investigation into electrochemical discharge machining of microholes”, Journal of Automation Mobile Robotics and Intelligent Systems 3(4), pp. 21 – 24, 2009.Search in Google Scholar

[16] Hajian, M., Razfar, M. R., Etefagh, A. H. “Experimental study of tool bending force and feed rate in ECDM milling”, The International Journal of Advanced Manufacturing Technology 91(5 – 8), pp. 1677 – 1687, 2017. DOI: 10.1007/s00170-016-9860-110.1007/s00170-016-9860-1Open DOISearch in Google Scholar

[17] Chak, S. K., Rao, P. V. “Trepanning of Al₂O₃ by electro-chemical discharge machining (ECDM) process using abrasive electrode with pulsed DC supply”, International Journal of Machine Tools and Manufacture 47 (14), pp. 2061 – 2070, 2007. DOI: 10.1016/j.ijmachtools.2007.05.00910.1016/j.ijmachtools.2007.05.009Open DOISearch in Google Scholar

[18] Wei, C., Ni, J., Hu, D. “Electrochemical Discharge Machining Using Micro-Drilling Tools”, Transactions of NAMRI/SME, 38, pp. 105–111, 2010.Search in Google Scholar

[19] Coteata, M., Pop, N., Schulze, H.P., Slatineanu, L., and Dodun, O. “Investigation on hybrid electrochemical discharge drilling process using passivating electrolyte”, Procedia CIRP 42, pp. 778 – 782, 2016. DOI: 10.1016/j.procir.2016.02.31810.1016/j.procir.2016.02.318Open DOISearch in Google Scholar

[20] Prasad, L., Khantwal, R. “Study on breaking load of single lap joint using hybrid joining techniques for alloy steel AISI 4140 and mild steel: Taguchi and neural network approach”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 51 – 60, 2018. DOI: 10.2478/scjme-2018-000510.2478/scjme-2018-0005Open DOISearch in Google Scholar

[21] Rao, M. S., Ramanaiah, N. “Optimization of Process Parameters For Fsw Of Al-Mg-Mn-Sc-Zr Alloy Using Ccd And RSM”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 195 – 224, 2018. DOI: 10.2478/scjme-2018-003510.2478/scjme-2018-0035Open DOISearch in Google Scholar

[22] Ribeiro, J., Lopes, H., Queijo, L. Figueiredo, D. “Optimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi method”, Periodica Polytechnica Mechanical Engineering 61 (1), pp. 30 – 35, 2017. DOI: 10.3311/PPme.911410.3311/PPme.9114Open DOISearch in Google Scholar

[23] Santha, D. R., Ramanaiah, N. “Process parameters optimization for producing AA6061/TiB2 composites by friction stir processing”, Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 101 – 118, 2017. DOI: 10.1515/scjme-2017-001110.1515/scjme-2017-0011Open DOISearch in Google Scholar

[24] Santha, D. R., Ramanaiah, N. “Process parameters optimization for producing AA6061/TiB2 composites by friction stir processing”, Strojnícky časopis – Journal of Mechanical Engineering 67(1), pp.101–118, 2017. DOI: 10.1515/scjme-2017-001110.1515/scjme-2017-0011Open DOISearch in Google Scholar

[25] Razfar, M. R., Ni, J., Behroozfar, A., Lan, S. “An investigation on electrochemical discharge micro-drilling of glass”, In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference, pp. V002T03A013-V002T03A013, 2013. DOI: 10.1115/MSEC2013-113510.1115/MSEC2013-1135Open DOISearch in Google Scholar

[26] Paul, L., Hiremath, S. “Evaluation of process parameters of ECDM using Grey Relational Analysis”, Procedia Materials Science 5, pp. 2273 – 2282, 2014. DOI: 10.1016/j.mspro.2014.07.44610.1016/j.mspro.2014.07.446Open DOISearch in Google Scholar

[27] Goud, M., Sharma, A. K. “On performance studies during micromachining of quartz glass using electrochemical discharge machining”, Journal of Mechanical Science and Technology 31 (3), pp. 1365 – 1372, 2017. DOI: 10.1007/s12206-017-0236-810.1007/s12206-017-0236-8Open DOISearch in Google Scholar

[28] Singh, I., Bhatnagar, N., Viswanath, P. “Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study”, Materials and Design 29 (2), pp. 546 – 553, 2008. DOI: 10.1016/j.matdes.2007.01.02910.1016/j.matdes.2007.01.029Open DOISearch in Google Scholar

[29] Chang, D.Y., Lin, S.Y. “Tool wear, hole characteristics, and manufacturing tolerance in alumina ceramic micro drilling process”, Materials and Manufacturing Processes 27 (3), pp. 306 – 313, 2012. DOI: 10.1080/10426914.2011.57788110.1080/10426914.2011.577881Open DOISearch in Google Scholar

[30] Gao, C., Liu, Z., Li, A. “Study of Micro Drilling on Pyrex Glass Using Spark Assisted Chemical Engraving”, Micro and Nanosystems 6 (1), pp. 26 – 33, 2014. DOI: 10.2174/187640290566613111220135810.2174/1876402905666131112201358Open DOISearch in Google Scholar

[31] He, S., Tong, H., Liu, G. “Spark assisted chemical engraving (SACE) mechanism on ZrO₂ ceramics by analyzing processed products”, Ceramics International 44 (7), pp. 7967 – 7971, 2018. DOI: 10.1016/j.ceramint.2018.01.23610.1016/j.ceramint.2018.01.236Open DOISearch in Google Scholar

[32] Zheng, Z.P., Su, H.C., Huang, F.Y., Yan, B.H. “The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process”, Journal of Micromechanics and Microengineering 17 (2), pp. 265 – 272, 2007. DOI: 10.1088/0960-1317/17/2/01210.1088/0960-1317/17/2/012Open DOISearch in Google Scholar

[33] Huang, S. F., Liu, Y., Li, J., Hu, H. X., Sun, L. Y. “Electrochemical Discharge Machining Micro-Hole in Stainless Steel with Tool Electrode High-Speed Rotating”, Materials and Manufacturing Processes 29 (5), 634 – 637, 2014. DOI: 10.1080/10426914.2014.90152310.1080/10426914.2014.901523Open DOISearch in Google Scholar

[34] Madhavi, B. J., Hiremath, S. S. “Investigation on Machining of Holes and Channels on Borosilicate and Sodalime Glass using µ-ECDM Setup”, Procedia Technology 25, pp. 1257 – 1264, 2016. DOI: 10.1016/j.protcy.2016.08.21910.1016/j.protcy.2016.08.219Open DOISearch in Google Scholar

[35] Bhosetty, K., Gurram, V. K., Kumba, A. B. “Effect of Minimum Quantity Lubrication on Surface Roughness And Temperature In Milling of EN31 Steel For Die Making, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), 61 – 68, 2019. DOI: 10.2478/scjme-2019-000510.2478/scjme-2019-0005Open DOISearch in Google Scholar