<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The aim of the paper is to assess the effect of residual stresses on the damage of the slide bearer. To quantify the residual stresses, the drilling method using SINT MTS 3000 drilling machine was chosen. The tensometric rosette application areas were determined based on the analysis of the results obtained by numerical modeling using the finite element method. Experimental measurement was performed on one unused slide bearer and on the other one, which during its present operation had completed about 9.10<sup>6</sup>cycles. At the end of the paper, the analysis of the measured residual stress values in chosen locations is presented.</p></abstract>

The aim of the paper is to assess the effect of residual stresses on the damage of the slide bearer. To quantify the residual stresses, the drilling method using SINT MTS 3000 drilling machine was chosen. The tensometric rosette application areas were determined based on the analysis of the results obtained by numerical modeling using the finite element method. Experimental measurement was performed on one unused slide bearer and on the other one, which during its present operation had completed about 9.106cycles. At the end of the paper, the analysis of the measured residual stress values in chosen locations is presented.

The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members

Faculty of Mechanical Engineering, Department of Applied Mechanic and Mechanical Engineering

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The aim of the paper is to assess the effect of residual stresses on the damage of the slide bearer. To quantify the residual stresses, the drilling method...

The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members

Published Online: May 31, 2019

Page range: 85 - 96

DOI: https://doi.org/10.2478/scjme-2019-0007

Keywords
Residual stresses, numerical modeling, Photostress

© 2019 Pástor Miroslav et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members

Published Online: May 31, 2019

Page range: 85 - 96

DOI: https://doi.org/10.2478/scjme-2019-0007

KeywordsResidual stresses, numerical modeling, Photostress

© 2019 Pástor Miroslav et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
Residual stresses, numerical modeling, Photostress