Influence of in-Plane Deformation in Higher Order Beam Theories

[1] J. Murin, M. Aminbaghai, V. Goga, V. Kutiš , J. Paulech 1 , J. Hrabovský. Effect of nonuniform torsion on elastostatics of a frame of hollow rectangular cross-section. Journal of Mechanical Engineering - Strojnícky časopis 2018 (68), No. 2, 35 - 52.10.2478/scjme-2018-0016Search in Google Scholar

[2] R. Schardt. Lateral torsional, and distortional buckling of channel-, and hat-sections. Journal of Constructional Steel Research 1994 (31), No. 2 - 3, 243 - 265.10.1016/0143-974X(94)90012-4Search in Google Scholar

[3] E. Reissner. Analysis of shear lag in box beams by the principle of minimum potential energy. Quarterly of Applied Mathematics 1946 (4), No. 3, 268 - 278.10.1090/qam/17176Search in Google Scholar

[4] D. J. Malcolm, R.G. Redwood. Shear lag in stiffened box-girders. J. Struct. Div. ASCE 1970 (96), No. 7, 1403 - 1415.10.1061/JSDEAG.0002622Search in Google Scholar

[5] K. R. Moffatt, P. J. Dowling. Shear lag in steel box-girder bridges. Struct. Engineer 1975 (53), No. 10, 439 - 448.Search in Google Scholar

[6] N.W. Murray. Introduction to the theory of thin-walled structures. Oxford University Press, 1986.Search in Google Scholar

[7] Eurocode 3: Design of Steel Structures - Part 1.5: Plated Structural Elements, European Committee for Standardization, 2004, prEN 1993-1-5.Search in Google Scholar

[8] Eurocode 4: Design of Composite Steel and Concrete Structures - Part 1.1: General Rules and Rules for Buildings, European Committee for Standardization, 2004, prEN 1994-1-1.Search in Google Scholar

[9] Eurocode 4: Design of Composite Steel and Concrete Structures - Part 2: General Rules and Rules for Bridges, European Committee for Standardization, 2004, prEN 1994-2.Search in Google Scholar

[10] Eurocode 2: Design of concrete structures - Part 2: Concrete bridges - Design and detailing rules, European Committee for Standardization, 2005, EN 1992-2.Search in Google Scholar

[11] C. A., Ie, J. B. Kosmatka. On the analysis of prismatic beams using first-order warping functions. International Journal of Solids, and Structures 1992 (29), No. 7, 879 - 891.10.1016/0020-7683(92)90023-MSearch in Google Scholar

[12] Eurocode 9: Design of aluminium structures - Part 1.3: Structures susceptible to fatigue, European Committee for Standardization, 2007, EN 1999-1-3.Search in Google Scholar

[13] N.H., Park, N.H., Lim, Y.J. Kang. A consideration on intermediate diaphragm spacing in steel box girder bridges with a doubly symmetric section. Engineering Structures 2003 (25), No. 13, 1665 - 1674.10.1016/S0141-0296(03)00145-7Search in Google Scholar

[14] V. Vlasov. Thin-walled elastic beams. Israel Program for Scientific Translations, Jerusalem, 1963.Search in Google Scholar

[15] R.N. Wright, S.R. Abdel-Samad, A.R. Robinson. BEF analogy for analysis of box girders. J. Struct. Div., ASCE 1968 (94), No. 7, 1719 - 1743.10.1061/JSDEAG.0002013Search in Google Scholar

[16] L.T. Stavridis. Structural Systems: Behaviour, and design. Thomas Telford Limited, 40 Marsh Wall, London, 2010.10.1680/ssbd.41059Search in Google Scholar

[17] L.F. Boswell, S.H. Zhang. A box beam finite element for the elastic analysis of thinwalled structures. Thin-Walled Structures 1983 (1), No. 4, 353 - 383.10.1016/0263-8231(83)90014-9Search in Google Scholar

[18] L.F. Boswell, S.H. Zhang. The effect of distortion in thin-walled box-spine beams. International Journal of Solids and Structures 1984 (20), No. 9 - 10, 842 - 862.10.1016/0020-7683(84)90054-4Search in Google Scholar

[19] S.H. Zhang, L.P.R. Lyons. A thin-walled box beam finite element for curved bridge analysis. Computers and Structures 1984 (18), No. 6, 1035 - 1046.10.1016/0045-7949(84)90148-2Search in Google Scholar

[20] S.H. Zhang, L.P.R. Lyons. The application of the thin-walled box beam element to multibox bridge analysis. Computers and Structures 1984 (18), No. 5, 795 - 802.10.1016/0045-7949(84)90026-9Search in Google Scholar

[21] B. Kermani, P. Waldron. Analysis of continuous box girder bridges including the effects of distortion. Computers and Structures 1993 (47), No. 3, 427 - 440.10.1016/0045-7949(93)90238-9Search in Google Scholar

[22] N.I. Kim, M.Y. Kim. Exact dynamic/static stiffness matrices of non-symmetric thinwalled beams considering coupled shear deformation effects. Thin-Walled Structures 2005 (43), No. 5, 701 - 734.10.1016/j.tws.2005.01.004Search in Google Scholar

[23] N.H. Park, S. Choi, Y.J. Kang. Exact distortional behavior, and practical distortional analysis of multicell box girders using an expanded method. Computers and Structures 2005 (83), No. 19 - 20, 1607 - 1626.10.1016/j.compstruc.2005.01.003Search in Google Scholar

[24] L.F. Boswell, Q. Li. Consideration of the relationships between torsion, distortion, and warping of thin-walled beams. Thin-Walled Structures 1995 (21), No. 2, 147 - 161.10.1016/0263-8231(94)00030-4Search in Google Scholar

[25] R. Schardt. Verallgemeinerte technicsche biegetheory. Germany: Springler - Verlag, 1989.10.1007/978-3-642-52330-4Search in Google Scholar

[26] R. Schardt. Generalised Beam Theory - An adequate method for coupled stability problems. Thin-Walled Structures 1994 (19), No. 2 - 4, 161 - 180.10.1016/0263-8231(94)90027-2Search in Google Scholar

[27] J.M. Davies, P. Leach. First-order Generalized Beam Theory. Journal of Constructional Steel Research 1994 (31), No. 2 - 3, 187 - 221.10.1016/0143-974X(94)90010-8Search in Google Scholar

[28] J.M. Davies, P. Leach, D. Heinz. Second-order Generalized Beam Theory. Journal of Constructional Steel Research 1994 (31), No. 2 - 3, 221 - 241.10.1016/0143-974X(94)90011-6Search in Google Scholar

[29] P. Leach. The calculation of modal cross-section properties for use in the Generalized Beam Theory. Thin-Walled Structures 1994 (19), No. 1, 61 - 79.10.1016/0263-8231(94)90005-1Search in Google Scholar

[30] P. Leach, J. M. Davies. An experimental verification of the Generalized Beam Theory applied to interactive buckling problems. Thin-Walled Structures 1996 (25), No. 1, 61 -79.10.1016/0263-8231(95)00031-3Search in Google Scholar

[31] N. Silvestre, D. Camotim. First-order Generalised Beam Theory for arbitrary orthotropic materials. Thin-Walled Structures 2002 (40), No. 9, 755 - 789.10.1016/S0263-8231(02)00025-3Search in Google Scholar

[32] R. Gonçalves, D. Camotim. GBT local, and global buckling analysis of aluminium, and stainless steel columns. Computers and Structures 2004 (82), No. 17 - 19, 1473 - 1484.10.1016/j.compstruc.2004.03.043Search in Google Scholar

[33] R. Gonçalves, D. Camotim. Thin-walled member plastic bifurcation analysis using Generalised Beam Theory. Advances in Engineering Software 2007 (38), No. 8 - 9, 637 - 646.10.1016/j.advengsoft.2006.08.027Search in Google Scholar

[34] R. Gonçalves, D. Camotim. Generalised Beam Theory-based finite elements for elastoplastic thin-walled metal members. Thin-Walled Structures 2011 (49), No. 10, 1237 - 1245.10.1016/j.tws.2011.05.011Search in Google Scholar

[35] N. Silvestre. Generalised Beam Theory to analyse the buckling behaviour of circular cylindrical shells, and Tubes. Thin-Walled Structures 2007 (45), No. 2, 185 - 198.10.1016/j.tws.2007.02.001Search in Google Scholar

[36] P. B. Dinis, D. Camotim, N. Silvestre. On the local, and global buckling behaviour of angle, t-section, and cruciform thin-walled members. Thin-Walled Structures 2010 (48), No. 10 -11, 786 - 797.10.1016/j.tws.2010.04.012Search in Google Scholar

[37] R. Gonçalves, M. R. Corrêa, D. Camotim. A large displacement, and finite rotation thinwalled beam formulation including cross-section deformation. Comput. Methods Appl. Mech. Engrg 2010 (199), No. 23 - 24, 1627 - 1643.10.1016/j.cma.2010.01.006Search in Google Scholar

[38] N. Silvestre, D. Camotim. On the mechanics of distortion in thin-walled open sections. Thin-Walled Structures. 2010 (48), No. 7, 469 - 481.10.1016/j.tws.2010.02.001Search in Google Scholar

[39] D. Camotim, P. B. Dinis. Coupled instabilities with distortional buckling in cold-formed steel lipped channel columns. Thin-Walled Structures 2011 (49), No. 5, 562 - 575.10.1016/j.tws.2010.09.003Search in Google Scholar

[40] P.B. Dinis, D. Camotim. Post-buckling behaviour, and strength of cold-formed steel lipped channel columns experiencing distortional/global interaction. Computers and Structures 2011 (89), No. 3 - 4, 422 - 434.10.1016/j.compstruc.2010.11.015Search in Google Scholar

[41] M. Abambres, D. Camotim, N. Silvestre. GBT-Based first-order analysis of elastic plastic thin-walled steel members exhibiting strain-hardening. The IES Journal Part A: Civil, and Structural Engineering 2013 (6), No. 2., 119 - 134. DOI: 10.1080/19373260.2012.75720910.1080/19373260.2012.757209Open DOISearch in Google Scholar

[42] C. D. Balch, C. R. Steele. Asymptotic solutions for warping, and distortion of thin-walled box beams. Journal of Applied Mechanics, ASME 1987 (54), No. 1, 165 - 173.10.1115/1.3172953Search in Google Scholar

[43] L. Mentrasti. Distorion (and torsion) of rectangular thin-walled beams. Thin-Walled Structures 1990 (10), No. 3, 175 - 193.10.1016/0263-8231(90)90062-4Search in Google Scholar

[44] G. Ranzi, A. Luongo. A new approach for thin-walled member analysis in the framework of GBT, Thin-Walled Structures 2011 (49), No. 11, 1404 - 1414.10.1016/j.tws.2011.06.008Search in Google Scholar

[45] J. Jönsson, M. J. Andreassen. Distortional eigenmodes, and homogeneous solutions for semi-discretized thin-walled beams. Thin-Walled Structures 2011 (49), No. 6, 691 - 707.10.1016/j.tws.2010.12.009Search in Google Scholar

[46] M. J. Andreassen, J. Jönsson. Distortional solutions for loaded semi-discretized thinwalled beams. Thin-Walled Structures 2012 (50), No. 1, 116 - 127.10.1016/j.tws.2011.08.013Search in Google Scholar

[47] M. J. Andreassen, J. Jönsson. Distortional buckling modes of semi-discretized thinwalled columns. Thin-Walled Structures 2012 (51), 53 - 63.10.1016/j.tws.2011.11.002Search in Google Scholar

[48] M. J. Andreassen, J. Jönsson. A distortional semi-discretized thin-walled beam element. Thin-Walled Structures 2013 (62), 142 - 157.10.1016/j.tws.2012.07.011Search in Google Scholar

[49] R. F. Vieira, F. B. Virtuoso, E. B. R. Pereira. A higher order model for thin-walled structures with deformable cross-sections. International Journal of Solids and Structures 2014 (51), No. 3 - 4, 575 - 598.10.1016/j.ijsolstr.2013.10.023Search in Google Scholar

[50] B. W. Schafer, S. Ádány. Understanding, and classifying local, distortional, and global buckling in open thin-walled members. Annual Conference Structural Stability Research Council, Montreal, Canada, 2005.Search in Google Scholar

[51] D. Camotim, N. Silvestre, R. Gonçalves, P. B. Dinis. GBT-based structural analysis of thin-walled members: overview, recent progress and future developments. M. Pandey et al. (eds), Advances in Engineering Structures, Mechanics & Construction 2006 (140), 187 - 204.10.1007/1-4020-4891-2_16Search in Google Scholar

[52] B. W. Schafer, S. Ádány. Buckling analysis of cold-formed steel members using CUFSM: conventional, and constrained Finite Strip Methods. 18th International Specialty Conference on Cold-Formed Steel Structures, Orlando, Florida, 2006.Search in Google Scholar

[53] S. Ádány, B. W. Schafer. Buckling mode decomposition of single-branched open crosssection members via Finite Strip Method: Derivation. Thin-Walled Structures, 2006 (44), No. 5, 563 - 584.10.1016/j.tws.2006.03.013Search in Google Scholar

[54] S. Ádány, B. W. Schafer. Buckling mode decomposition of single-branched open crosssection members via Finite Strip Method: Application, and examples. Thin-Walled Structures 2006 (44), No. 5, 585 - 600.10.1016/j.tws.2006.03.014Search in Google Scholar

[55] S. Ádány, B. W. Schafer. A full modal decomposition of thin-walled, single-branched open cross-section members via the constrained Finite Strip Method. Journal of Constructional Steel Research 2008 (64), No. 1, 12 - 29.10.1016/j.jcsr.2007.04.004Search in Google Scholar

[56] Z. Li, M.T. Hanna, S. Ádány, B. W. Schafer. Impact of basis, orthogonalization, and normalization on the constrained Finite Strip Method for stability solutions of open thinwalled members. Thin-Walled Structures 2011 (49), No. (9), 1108 - 1122.10.1016/j.tws.2011.04.003Search in Google Scholar

[57] V. J. Tsipiras, E. J. Sapountzakis. Bars under nonuniform torsion - application to steel bars, Assessment of EC3 guidelines. Engineering Structures 2014 (60), 133 - 147.10.1016/j.engstruct.2013.12.027Search in Google Scholar

[58] J. B. Kosmatka, S. B. Dong. Saint-Venant solutions for prismatic anisotropic beams. International Journal of Solids and Structures 1991 (28), No. 7, 917 - 938.10.1016/0020-7683(91)90008-4Search in Google Scholar

[59] C.A. Ie, J. B. Kosmatka. Saint-Venant elasticity solutions of a tip-loaded anisotropic cantilevered beam with an elliptical section. Composites Engineering 1993 (3), No. 12, 1149 - 1164.10.1016/0961-9526(93)90071-QSearch in Google Scholar

[60] A. E. H. Love. A treatise on the mathematical theory of elasticity, Dover, New York, 1944.Search in Google Scholar

[61] X. S. Xu, W. X. Zhong. H. W. Zhang. The Saint-Venant problem, and principle in elasticity. International Journal of Solids and Structures 1997 (34), No. 22, 2815 - 2827.10.1016/S0020-7683(96)00198-9Search in Google Scholar

[62] S. W. Reagan, W. D. Pilkey. Constrained torsion of prismatic bars. Finite Elements in Analysis, and Design 2002 (38), No. 10, 909 - 919.10.1016/S0168-874X(02)00084-7Search in Google Scholar

[63] P. F. Pai. High-fidelity sectional analysis of warping functions, stiffness values, and wave properties of beams. Engineering Structures 2014 (67), No. 15, 77 - 95.10.1016/j.engstruct.2014.02.034Search in Google Scholar

[64] V. Giavotto, M. Borri, P. Mantegazza, G. Ghiringhelli, V. Carmaschi, G. C. Maffioli, F. Mussi. Anisotropic beam theory, and applications. Computers and Structures 1983 (16), No. 1 - 4, 403 - 413.10.1016/0045-7949(83)90179-7Search in Google Scholar

[65] M. Kazic, S. B. Dong. Analysis of restrained torsion. Journal of Engineering Mechanics, 1990 (116), No. 4, 870 - 891.10.1061/(ASCE)0733-9399(1990)116:4(870)Search in Google Scholar

[66] N. Ghazouani, R. El Fatmi. Extension of the non-uniform warping theory to an orthotropic composite beam. Comptes Rendus Mecanique 2010 (338), No. 12, 704 - 711.10.1016/j.crme.2010.09.002Search in Google Scholar

[67] N. Ghazouani, R. El Fatmi. Higher order composite beam theory built on Saint-Venant’s Solution. Part-II: Built-in effects influence on the behavior of end-loaded cantilever beams. Composite Structures 2011 (93), No. 2, 567 - 581.10.1016/j.compstruct.2010.08.023Search in Google Scholar

[68] R. El Fatmi, N. Ghazouani. Higher order composite beam theory built on Saint-Venant’s Solution. Part-I: Theoretical developments. Composite Structures 2011 (93), No. 2, 557- 566.10.1016/j.compstruct.2010.08.024Search in Google Scholar

[69] E. Petrov, M. Géradin. Finite element theory for curved, and twisted beams based on exact solutions for three-dimensional solids, Part 1: Beam concept, and geometrically exact nonlinear formulation. Computational Methods in Applied Mechanics, and Engineering. 1998 (165), No. 1 - 4, 43 - 92.10.1016/S0045-7825(98)00061-9Search in Google Scholar

[70] M. K. Ferradi, X. Cespedes. A new beam element with transversal, and warping eigenmodes. Computers and Structures 2014 (131), 12 - 33.10.1016/j.compstruc.2013.10.001Search in Google Scholar

[71] M. K. Ferradi, X. Cespedes, M. Arquier. A higher order beam finite element with warping eigenmodes. Engineering Structures 2013 (46), 748 - 762.10.1016/j.engstruct.2012.07.038Search in Google Scholar

[72] A. Genoese, A. Genoese, A. Bilotta, G. Garcea. A generalized model for heterogeneous, and anisotropic beams including section distortions. Thin-Walled Structures 2014 (74), 85 - 103.10.1016/j.tws.2013.09.019Search in Google Scholar

[73] I. C. Dikaros, E. J. Sapountzakis. Distortional analysis of beams of arbitrary cross section by BEM. Journal of Engineering Mechanics, ASCE 2017 (143), No. 10, 04017118, DOI:10.1061/(ASCE)EM.1943-7889.000134010.1061/(ASCE)EM.1943-7889.0001340Search in Google Scholar

[74] N. Ghazouani, R. El Fatmi. Higher order composite beam theory built on Saint-Venant’s solution, Part-II: Built-in effects influence on the behavior of end-loaded cantilever beams. Composite Structures 2011 (93), No. 2, 567 - 581.10.1016/j.compstruct.2010.08.023Search in Google Scholar

[75] D. Henriques, R. Gonçalves, D. Camotim. GBT-based finite element to assess the buckling behaviour of steel-concrete composite beams. Thin-Walled Structures 2016, (107), 207 - 220.10.1016/j.tws.2016.06.005Search in Google Scholar

[76] G.-W. Jang, M.-J. Kim, Y. Y. Kim. Analysis of thin-walled straight beams with generally shaped closed sections using numerically determined sectional deformation functions. Journal of Structural Engineering, ASCE 2012 (138), No. 12, 1427 - 1435.10.1061/(ASCE)ST.1943-541X.0000582Search in Google Scholar

[77] E. J. Sapountzakis, V. G. Mokos. Warping shear stresses in nonuniform torsion by BEM. Computational Mechanics 2003 (30), No. 2, 131 - 142.10.1007/s00466-002-0373-4Search in Google Scholar

[78] R. Gonçalves, D. Camotim. Elastic buckling of uniformly compressed thin-walled regular polygonal tubes. Thin-Walled Structures 2013 (71), 35 - 45.10.1016/j.tws.2013.04.016Search in Google Scholar

[79] E. Sapountzakis, L. Tsellos, I. Dikaros. Advanced beam element under longitudinal external loading by BEM. Proc. of the 16th International Conference on Boundary Elements, and Meshless Techniques, 2015, 267 - 272, Valencia, Spain, July 06-08.Search in Google Scholar

[80] M. K. Ferradi, A. Lebée, A. Fliscounakis, X. Cespedes, K. Sab. A model reduction technique for beam analysis with the asymptotic expansion method. Computers and Structures 2016, (172), 11 - 28.10.1016/j.compstruc.2016.05.013Search in Google Scholar

[81] A. K. Argyridi, E. J. Sapountzakis. Advanced analysis of arbitrarily shaped axially loaded beams including axial warping and distortion. Thin-Walled Structures 2019 (134), 127 -147.10.1016/j.tws.2018.08.019Search in Google Scholar

[82] A. K. Argyridi, E .J. Sapountzakis. Higher Order Beam Theory for Linear Local Buckling Analysis. Engineering Structures 2018 (177), 770 - 784.10.1016/j.engstruct.2018.08.069Search in Google Scholar

[83] J. Bocko, P. Lengvarský, J. Šarloši. Buckling analysis of hetero-junction carbon nanotubes. Journal of Mechanical Engineering - Strojnícky časopis 2018, (68), No. 2, 9- 16.10.2478/scjme-2018-0013Search in Google Scholar

[84] I. S. Sohal, W. F. Chen. Local, and post-buckling behavior of tubular beam-columns. ASCE Journal of Structural Engineering 1988 (114), No. 5, 1073 - 1090.10.1061/(ASCE)0733-9445(1988)114:5(1073)Search in Google Scholar

[85] J. Davies, P. Leach, D. Heinz. Second-order generalised beam theory. Journal of Constructional Steel Research 1994 (31), No. 2 - 3, 221 - 241.10.1016/0143-974X(94)90011-6Search in Google Scholar

[86] R. Bebiano, C. Basaglia, D. Camotim, R. Gonçalves. GBT buckling analysis of generally loaded thin-walled members with arbitrary flat-walled cross-sections. Thin-Walled Structures 2018 (123), 11 - 24.10.1016/j.tws.2017.10.045Search in Google Scholar

[87] R. Gonçalves, D. Camotim. Buckling behaviour of thin-walled regular polygonal tubes subjected to bending or torsion. Thin-Walled Structures 2013 (73), 185- 197.10.1016/j.tws.2013.08.006Search in Google Scholar

[88] C. Basaglia, D. Camotim, R. Goncalves, A. Graca. GBT-based assessment of the buckling behaviour of cold-formed steel purlins restrained by sheeting. Thin-Walled Structures, 2013 (72), 217 - 229.10.1016/j.tws.2013.06.005Search in Google Scholar

[89] M. Bradford, R. Johnson. Inelastic buckling of composite bridge girders near internal supports. Proceedings of the Institution of Civil Engineers Part 2-Research, and Theory 1987 (83), 143 - 159.10.1680/iicep.1987.345Search in Google Scholar

[90] S. A. Karamanos, J. L. Tassoulas. Tubular members. I: Stability analysis, and preliminary results. Journal of Engineering Mechanics 1996 (122), No. 1, 64 - 71.10.1061/(ASCE)0733-9399(1996)122:1(64)Search in Google Scholar

[91] S. A. Karamanos, J. L. Tassoulas. Tubular members II: Local buckling, and experimental verification. Journal of Engineering Mechanics 1996 (122), No. 1, 72 - 78.10.1061/(ASCE)0733-9399(1996)122:1(72)Search in Google Scholar

[92] S. A. Karamanos. Bending instabilities of elastic tubes. International Journal of Solids, and Structures 2002 (39), No. 8, 2059 - 2085.10.1016/S0020-7683(02)00085-9Search in Google Scholar

[93] S. Houliara, S. A. Karamanos. Buckling, and post-buckling of long pressurised elastic thin-walled tubes under in-plane bending. Int. J. Nonlinear Mech. 2006 (41), No. (4), 491- 511.10.1016/j.ijnonlinmec.2005.11.002Search in Google Scholar

[94] T. Aoki, Y. Migita, Y. Fukumoto. Local buckling strength of closed polygon folded section columns. J Constr Steel Res, 1991 20(4), 259-70.10.1016/0143-974X(91)90077-ESearch in Google Scholar

[95] W. H. Wittrick. A unified approach to the initial buckling of stiffened panels in compression. Aeronautical Quarterly 1968 (19), No. 3, 265 - 283.10.1017/S0001925900004662Search in Google Scholar

[96] C.E. Kurt, R.C. Johnson. Cross sectional imperfections, and columns stability. Journal of the Structural Division, 1978 (104), No. 12, 1869 - 1883.10.1061/JSDEAG.0005053Search in Google Scholar

[97] N. Koseko, T. Aoki, Y. Fukumoto. The local buckling strength of the octagonal section steel columns. Proceedings of the Japan Society of Civil Engineers 1983 (330), 27 - 36.10.2208/jscej1969.1983.330_27Search in Google Scholar

[98] A.K. Argyridi, E.J. Sapountzakis. Generalized Warping In Flexural-Torsional Buckling Analysis of Composite Beams. Journal of Applied and Computational Mechanics 2016(2), No. 3, 152 - 173.Search in Google Scholar

[99] Q. Wang, W.Y. Li. Buckling of thin-walled compression members with shear lag using spline finite member element method. Computational Mechanics 1996 (18), 139 - 146.10.1007/BF00350532Search in Google Scholar