Determination of Rectification Corrections for Semi Gantry Crane Rail Axes in the Local 3D Coordinate System

Baran L. W., (1999), Theoretical basis for analysis of geodetic survey results, Polish Scientific Publishers PWN SA, Warsaw.Search in Google Scholar

Gocał J., (2010), Engineering and industrial geodesy. Part III, AGH University of Science and Technology Press, Cracow.Search in Google Scholar

Grala M., & Kopiejewski G., (2003), Engineering Geodesy. Selected Branches, UWM Press, Olsztyn.Search in Google Scholar

Kamiński W., (2013), New method for determination of adjustment corrections for crane rail axes, Reports on Geodesy vol. 94/2013, 47-55, doi: 10.2478/rgg-2013- 0006Search in Google Scholar

Křemen T., Koska B., Pospíšil J., Kyrinovič P., Haličková J., & Kopáčik A., (2008), Checking of crane rails by terrestrial laser scanning technology, 13^th FIG, 4^th IAG, Lnec, Lisbon 12-15 MaySearch in Google Scholar

Kyrinovič P., & Kopáčik A., (2010), Automated measurement system for crane rail geometry determination, 27 th International Symposium on Automation and Robotics in Construction (ISARC 2010), 294 - 30510.22260/ISARC2010/0032Search in Google Scholar

Marjetič A., Kregar K., Ambrožič T., & Kogoj D., (2012), An Alternative Approach to Control Measurements of Crane Rails, Sensors, 12, 5906-591810.3390/s120505906338672022778621Search in Google Scholar

Wiśniewski Z., (2005), Adjustment calculus in geodesy (with examples), UWM Press, Olsztyn.Search in Google Scholar