LNG Tank in Świnoujście: Nonlinear Analysis of the Tank Dome Elements Behaviour

1. M. Alonso-Martinez, J.M. Adam, F.P. Alvarez-Rabanal and J.J. del Coz Díaz. ‘Wind turbine tower collapse due to flange failure: FEM and DOE analyses’, Engineering Failure Analysis. 2019, 104:932–49. doi: 10.1016/j.engfailanal.2019.06.045.10.1016/j.engfailanal.2019.06.045Search in Google Scholar

2. X. Yang, X. Zeng, X. Wang, J. Berrila and X. Li. ‘Performance and bearing behavior of monopile-friction wheel foundations under lateral-moment loading for offshore wind turbines’, Ocean Engineering. 2019, 184:159–72. doi: 10.1016/j. oceaneng.2019.05.043.10.1016/j.oceaneng.2019.05.043Search in Google Scholar

3. Z. Liu and L. Zhang. ‘A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings’, Measurement. 2020, 149:107002. doi: 10.1016/j.measurement.2019.107002.10.1016/j.measurement.2019.107002Search in Google Scholar

4. J. Chróścielewski, M. Miśkiewicz, Ł. Pyrzowski and K. Wilde. ‘Composite GFRP U-Shaped Footbridge’, Polish Maritime Research. 2017, 24:25–31. doi: 10.1515/pomr-2017-0017.10.1515/pomr-2017-0017Search in Google Scholar

5. Ł. Pyrzowski. ‘Testing contraction and thermal expansion coefficient of construction and moulding polymer composites’, Polish Maritime Research. 2018, 25:151–8. doi: 10.2478/pomr-2018-0036.10.2478/pomr-2018-0036Search in Google Scholar

6. N. Kharghani and C. Guedes Soares. ‘Experimental and numerical study of hybrid steel-FRP balcony overhang of ships under shear and bending’, Marine Structures. 2018, 60:15–33. doi: 10.1016/j.marstruc.2018.03.003.10.1016/j.marstruc.2018.03.003Search in Google Scholar

7. C.M. Wang, T.Y. Wu, Y.S. Choo, K.K. Ang, A.C. Toh, WY. Mao et al. ‘Minimizing differential deflection in a pontoon-type, very large floating structure via gill cells’, Marine Structures. 2006, 19:70–82. doi: 10.1016/j.marstruc.2006.06.002.10.1016/j.marstruc.2006.06.002Search in Google Scholar

8. Y.G. Cao and S.H. Zhang. ‘Failure analysis of a pinion of the jacking system of a jack-up platform’, Engineering Failure Analysis. 2013, 33:212–21. doi: 10.1016/j. engfailanal.2013.05.018.10.1016/j.engfailanal.2013.05.018Search in Google Scholar

9. H. Qin, L. Mu, W. Tang and Z. Hu. ‘Numerical study on structural response of anti-sloshing baffles of different configurations in a sloshing tank considering hydroelasticity’, Ocean Engineering. 2019, 188:106290. doi: 10.1016/j. oceaneng.2019.106290.10.1016/j.oceaneng.2019.106290Search in Google Scholar

10. A. Tatsumi and M. Fujikubo. ‘Ultimate strength of container ships subjected to combined hogging moment and bottom local loads part 1: Nonlinear finite element analysis’, Marine Structures. 2020, 69:102683. doi: 10.1016/j. marstruc.2019.102683.10.1016/j.marstruc.2019.102683Search in Google Scholar

11. Ł. Pyrzowski, M. Miśkiewicz and J. Chróścielewski. ‘The effect of fishing basin construction on the behaviour of a footbridge over the port channel’, Polish Maritime Research. 2017, 24:182–7. doi: 10.1515/pomr-2017-0037.10.1515/pomr-2017-0037Search in Google Scholar

12. M. Miśkiewicz, Ł. Pyrzowski, K. Wilde and O. Mitrosz. ‘Technical monitoring system for a new part of Gdańsk deepwater container terminal,’ Polish Maritime Research. 2017, 24:149–55. doi: 10.1515/pomr-2017-0033.10.1515/pomr-2017-0033Search in Google Scholar

13. M. Sondej, C. Ratnayake and M. Wójcik. ‘Economical and safe method of granular material storage in silos in offshore port terminals’, Polish Maritime Research. 2018, 25:62–8. doi: 10.2478/pomr-2018-0097.10.2478/pomr-2018-0097Search in Google Scholar

14. H. Jeong and W.J. Shim. ‘Calculation of boil-off gas (BOG) generation of KC-1 membrane LNG tank with high density rigid polyurethane foam by numerical analysis’, Polish Maritime Research. 2017, 24:100–14. doi: 10.1515/pomr-2017-0012.10.1515/pomr-2017-0012Search in Google Scholar

15. M. Miśkiewicz, J. Chróścielewski, B. Sobczyk, Ł. Pyrzowski and K. Wilde. ‘Verification of rafter strenghtening in the gas tank roof’, Proceedings of the 27th Conference on Structural Failures, Szczecin-Międzyzdroje. 2015, p. 253–60.Search in Google Scholar

16. Saipem S.P.A. Detailed design of roof framing for LNG tanks package LNG tank TK-2011 and TK-2012. 2012.Search in Google Scholar

17. Dassault Systèmes Simulia Corp. Abaqus 6.14 Documentation, Dassault Systèmes, Providence, RI, USA, 2014.Search in Google Scholar

18. M.G. Larson and F. Bengzon. The finite element method: Theory, implementation, and applications. vol. 10. Berlin, Heidelberg: Springer Berlin Heidelberg. 2013. doi: 10.1007/978-3-642-33287-6.10.1007/978-3-642-33287-6Search in Google Scholar