Marine Four-Stroke Diesel Engine Crankshaft Main Bearing Oil Film Lubrication Characteristic Analysis

1. Sun, Jun, X. Cai, and L. Liu. On the elastohydrodynamic lubrication performance of crankshaft bearing based on the effect of whole engine block deformation. Industrial Lubrication and Tribology 64.1(2012):60–65.10.1108/00368791211196907Search in Google Scholar

2. Cai, X. X., et al. Elastohydrodynamic lubrication analysis of main bearing for internal combustion engine considering block deformation. Tribology 30.2(2010):118–122.Search in Google Scholar

3. Lei, Jilin, et al. Analysis on influence factors of main bearing lubrication characteristics for horizontal diesel engine. Transactions of the Chinese Society of Agricultural Engineering volume 28.17(2012):19–24(6).Search in Google Scholar

4. Wei, Lidui. Thermo-elasto-hydrodynamic Mixed Lubrication of Main Bearings of Marine Diesel Engines, Based on Coupling between Flexible Engine Block and Crankshaft. Journal of Mechanical Engineering 50.13(2014):97.10.3901/JME.2014.13.097Search in Google Scholar

5. Wei, L., S. Duan, and H. Wei. TEHD lubrication analysis of the main bearings of a marine diesel engine based on the flexible engine block. Journal of Harbin Engineering University (2015).10.1108/ILT-08-2013-0088Search in Google Scholar

6. Saša Bukovnik;Günter Offner, et al. Thermo elasto hydrodynamic lubrication model for journal bearing including shear rate-dependent viscosity. Lubrication Science 19.4(2007):231–245.10.1002/ls.45Search in Google Scholar

7. Greenwood J. A., Tripp J. H. The contact of nominally flat rough surface [J]. Proceedings of the Institution of Mechanical Engineers, 1970, 185(46):625–633.Search in Google Scholar

8. Greenwood J. A., Tripp J. H. The contact of nominally flat rough surface [J]. Proceedings of the Institution of Mechanical Engineers, 1970, 185(46):625–633.Search in Google Scholar