The Unpredictable Errors of Micro Tactile Metrology – Factors Affecting Stylus tip Contamination

[1] Liang, Q., Zhang, D., Wang, Y., Coppola, G., Ge, Y. (2013). PM based multi-component F/T sensors- State of the art and trends. Robotics and Computer- Integrated Manufacturing, 29 (4), 1-7.10.1016/j.rcim.2012.12.002Search in Google Scholar

[2] Peiner, E., Balke, M., Doering, L. (2007). Slender tactile sensor for high-aspect-ratio micro metrology. In IEEE Sensors, 28-31 October 2007. IEEE, 760-763.10.1109/ICSENS.2007.4388511Search in Google Scholar

[3] Ping, Y., Tomohiko, T., Satoru, T., Kiyoshi, T., Osamu, S., Sonko, O., Toshiyuki, T. (2011).Development of high-precision micro-coordinate measuring machine: Multi-probe measurement system for measuring yaw and straightness motion error of XY linear stage. Precision Engineering, 35 (3), 424-430.Search in Google Scholar

[4] Weckenmann, A., Estler, T., Peggs, G., McMurtry, D. (2004). Probing systems in dimensional metrology. In CIRP Annals - Manufacturing Technology, 53 (2), 657-684.10.1016/S0007-8506(07)60034-1Search in Google Scholar

[5] Meli, F., Küng, A. (2007). AFM investigation on surface damage caused by mechanical probing with small ruby spheres. Measurement Science and Technology, 18, 496-502.10.1088/0957-0233/18/2/S24Search in Google Scholar

[6] Nicolet, A., Kung, A., Meli, F. (2012). Study of sapphire probe tip wear when scanning on different materials. Measurement Science and Technology, 23, 094016.10.1088/0957-0233/23/9/094016Search in Google Scholar

[7] Stone, J., Muralikrishnan, B., Sahay, C. (2011).Geometric effects when measuring small holes with micro contact probes. Research of the National Institute of Standards and Technology, 116, 573-587.10.6028/jres.116.006455033826989585Search in Google Scholar

[8] Muralikrishnan, B., Stone, J., Stoup, J. (2006). Fiber deflection probe for small hole metrology. Precision Engineering, 30, 154-164.10.1016/j.precisioneng.2005.07.004Search in Google Scholar

[9] Stone, J., Muralikrishnan, B., Stoup, J. (2005). A fiber probe for CMM measurements of small features. In Recent Developments in Traceable Dimensional Measurement III. Proc. SPIE 5879, 254-264.Search in Google Scholar

[10] Wozniak, A., Mayer, R., Balazinski, M. (2009). Stylus tip envelop method: Corrected measured point determination in high definition coordinate metrology.International Journal of Advanced Manufacturing Technology, 42, 505-514.10.1007/s00170-008-1615-1Search in Google Scholar

[11] Kinnell, P., Habeb, R. (2013) An evaluation of cleaning methods for micro-CMM probes.Measurement Science and Technology, 24, 085603.10.1088/0957-0233/24/8/085603Search in Google Scholar