Vibration Study for a Subassembly – Part of Hydraulic Turbines

[1] Haţiegan C., Pădureanu I., Jurcu M., Nedeloni M.D., HamatC.O., Chioncel C.P., Trocaru S., Vasile O., Bădescu O., Micliuc D., Nedeloni L., Băra A., & Haţiegan L., Vibration analysis of a hydro generator for different operating regimes, IOP Conference Series: Materials Science and Engineering, Hunedoara, 2016, Vol.163, Issue 1, 2017.10.1088/1757-899X/163/1/012030Search in Google Scholar

[2] Pădureanu I., Jurcu M., Campian C.V., & Haţiegan C., Determination of the performance of the Kaplan hydraulic turbines through simplified procedure, IOP Conference Series: Materials Science and Engineering, Hunedoara, 2017, Vol. 294, Issue 1, 2018.10.1088/1757-899X/294/1/012027Search in Google Scholar

[3] Haţiegan C., Nedeloni M. D., Tufoi M., Protocsil C., & Răduca M., Modal Analysis Of Natural Frequencies And Mass Participation Coefficients Of Simply Supported Thin Plates With Damages, Constanţa Maritime University Annals, Vol. 19, 2013.Search in Google Scholar

[4] Haţiegan C., Gillich G. R., Gillich N., Tufoi M., & Răduca M., Modal Analysis of Thin Plates with Damage Simply Supported on all Edges, Analele Universităţii “EFTIMIE MURGU”, Anul XX, Issue 1, Reşiţa, 2013.Search in Google Scholar

[5] Tufoi M., Gillich G. R., PraisachZ. I., KorkaZ. I., & Haţiegan C., Modal Analysis of a Butterfly Valve with Different Stiffening Elements, Romanian Journal of Acoustics & Vibration, Vol. XIII, Issue 1, 2016.Search in Google Scholar

[6] Haţiegan C., Tufoi M., Răduca E., Protocsil C., & Mituleţu C., Modal Analysis Through Solidworks Software Of Clamped Thin Plates With Damages, Constanţa Maritime University Annals, Anul XIV, Vol. 19, pp. 121-124, 2013.Search in Google Scholar

[7] Tufoi M., Haţiegan C., Vasile O., & Gillich G. R., Dynamic Analysis of Thin Plates with Defects by Experimental and FEM Methods, Romanian Journal of Acoustics & Vibration, Vol. X, Issue 2, 2013.Search in Google Scholar

[8] Haţiegan C., Molnar M., Trocaru S., Pădureanu I., Jurcu M., & Ilie F., Modeling and Simulation of Thermal Analysis of a Teflon Coated Plate, International Conference Knowledge-Based Organization 2016, Vol. 22, Issue 3, July 2016.10.1515/kbo-2016-0110Search in Google Scholar

[9] Haţiegan C., Gillich G. R., Popovici G., & Haţiegan L., The Influence of Temperature Changes on the Eigen-Frequencies and Mode Shapes for Rectangular Plates Clamped on the Contour, International Conference Knowledge-Based Organization 15-17.06.2017, Land Forces Academy “Nicolae Balcescu” Sibiu, Vol. 23, Issue 3, 2017.10.1515/kbo-2017-0172Search in Google Scholar

[10] Sorohan S., Roşu C.A., Blumenfeld M., Vasiliu N., & Pârăianu C., Cercetări Asupra Rezistenţei Arborilor Turbinelor Bulb cu Metoda Elementelor Finite, Editura Tehnică, Bucureşti, 2000.Search in Google Scholar

[11] Marcus R., Self-lubricating Bearings for Heavy-Duty Applications, Stadtallendorf, 2010.Search in Google Scholar

[12] Haţiegan C., Chioncel C.P., Răduca E., Popescu C., Pădureanu I, Jurcu M., Bordeaşu D., Trocaru S., Dilertea F., Bădescu O., Terfăloagă I.M., Băra A., & Haţiegan L., Determining the operating performance through electrical measurements of a hydro generator, IOP Conference Series: Materials Science and Engineering, Hunedoara 2016, Vol. 163, Issue 1, 2017.10.1088/1757-899X/163/1/012031Search in Google Scholar

[13] Jurcu M., Pădureanu I., Padeanu L., Augustinov L., & Haţiegan C., Tests Regarding the Transitory Regimes of Putting off Load of the Hydroagregate, Analele Universităţii “Eftimie Murgu”, Anul XXII, Issue 2, Reşiţa, 2015.Search in Google Scholar

[14] Stroia M.D., Mănescu T. Ş., & Toader M., Vibrations Induced by Friction Forces in Dynamic Systems, Romanian Journal of Acoustics & Vibration, Vol. VII, Issue 2, 2010.Search in Google Scholar

[15] Pădureanu I., Jurcu M., Augustinov L., Haţiegan C., Răduca E., & Padeanu L., Optimisation of the Start-up and Operation Regimes of Cooling Water Pumps of a High-Power Hydro Generator, Analele Universităţii “Eftimie Murgu”, Anul XXII, Issue 1, Reşiţa, 2015.Search in Google Scholar

[16] Pădureanu I., Jurcu M., Augustinov L., Haţiegan C., Răduca E., Implementation of an Automatic System for the Monitoring of Start-up and Operating Regimes of the Cooling Water Installations of a Hydro Generator, Analele Universităţii “Eftimie Murgu”, Anul XXII, Issue 1, Reşiţa, 2015.Search in Google Scholar

[17] Haţiegan C., Gillich E. V., Vasile O., Nedeloni M. D., & Pădureanu I., Finite Element Analysis of thin plates clamped on the rim of different geometric forms. Part I: Simulating the Vibration Mode Shapes and Natural Frequencies, Romanian Journal of Acoustics & Vibration, Vol.XII, Issue 1, 2015.Search in Google Scholar

[18] Haţiegan C., Gillich E. V., Vasile O., Nedeloni M. D., Jurcu M., & Magheţi P., Finite Element Analysis of thin plates clamped on the rim of different geometric forms. Part II: The Absolute and Relative Variation of Natural Frequencies, Romanian Journal of Acoustics & Vibration, Vol.XII, Issue 1, 2015.Search in Google Scholar

[19] Mănescu T. Ş, Stroia M. D., Afronie E., Chivu A., & Pomoja F., Causes of Vibrations Occurrence During Operation of Industrial Machinery, Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium, Vienna, Austria, 2010.Search in Google Scholar

[20] Băra A., Nedelcu D., Haţiegan C., Bejinariu A. C., & Nedeloni L., General aspects of speed increaser gearboxes, IOP Conference Series: Materials Science and Engineering, Hunedoara 2017, Vol. 294, Issue 1, 2018.10.1088/1757-899X/294/1/012032Search in Google Scholar

[21] Stroia M. D., Derbac D., Hatiegan C., & Cîndea L., Thermostat Model with Arduino Uno Board for Controlling a Cooling System, Annals of Constantin Brâncuşi University of Târgu-Jiu - Engineering Series, No. 3, 2018.Search in Google Scholar