<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Recent research has focused on finding ways to control hysteresis of dynamic comparators. The current proposed techniques are based on either geometrical dimension adjustment or digital control. The first case does not allow for post fabrication control, while the second has limited accuracy. This paper presents a new dynamic comparator design with external hysteresis adjustment using an analog voltage. This is achieved by proposing an architecture including control devices with a specific sizing. This is performed with no significant increase of the design complexity, keeping the power consumption as low as possible. The design is analyzed, showing that the proposed solution allows accurate hysteresis adjustment without affecting the inherent circuit properties. The dynamic comparator is also implemented using a 180 nm commercially available CMOS technology. The results show that a variation of 550 mV of the control voltage allows an accurate hysteresis adjustment ranging from 0 to 40 mV, according to the input conditions. Moreover, the simplicity of the circuit in conjunction with the use of dynamic technology have allowed the best performances to be achieved compared to the current state of the art, in terms of energy with an FoM equal to 116 fJ/decision and silicon area of 180 µm<sup>2</sup> .</p></abstract>

Recent research has focused on finding ways to control hysteresis of dynamic comparators. The current proposed techniques are based on either geometrical dimension adjustment or digital control. The first case does not allow for post fabrication control, while the second has limited accuracy. This paper presents a new dynamic comparator design with external hysteresis adjustment using an analog voltage. This is achieved by proposing an architecture including control devices with a specific sizing. This is performed with no significant increase of the design complexity, keeping the power consumption as low as possible. The design is analyzed, showing that the proposed solution allows accurate hysteresis adjustment without affecting the inherent circuit properties. The dynamic comparator is also implemented using a 180 nm commercially available CMOS technology. The results show that a variation of 550 mV of the control voltage allows an accurate hysteresis adjustment ranging from 0 to 40 mV, according to the input conditions. Moreover, the simplicity of the circuit in conjunction with the use of dynamic technology have allowed the best performances to be achieved compared to the current state of the art, in terms of energy with an FoM equal to 116 fJ/decision and silicon area of 180 µm2 .

Low-power latch comparator with accurate hysteresis control

Laboratory of Analysis, Design and Control of Systems

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Low-power latch comparator with accurate hysteresis control"}

Recent research has focused on finding ways to control hysteresis of dynamic comparators. The current proposed techniques are based on either geometrical...

Low-power latch comparator with accurate hysteresis control

Published Online: Dec 24, 2020

Page range: 379 - 387

Received: Oct 29, 2020

DOI: https://doi.org/10.2478/jee-2020-0052

Keywords
dynamic comparator, hysteresis analysis, hysteresis control, low power, Schmitt trigger

© 2020 Leïla Khanfir et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Low-power latch comparator with accurate hysteresis control

Published Online: Dec 24, 2020

Page range: 379 - 387

Received: Oct 29, 2020

DOI: https://doi.org/10.2478/jee-2020-0052

Keywordsdynamic comparator, hysteresis analysis, hysteresis control, low power, Schmitt trigger

© 2020 Leïla Khanfir et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Keywords
dynamic comparator, hysteresis analysis, hysteresis control, low power, Schmitt trigger