Multi-way differential power divider with microstrip output interfaces

[1] B. Wu, Y. Zhang, Y. Zhao, W. Zhang, and L. He, “Compact nine-way power divider with omnidirectional resistor based on graphene flake”, IEEE Microwave and Wireless Components Letters, vol. 28, no. 9, pp. 762-764, September 2018.10.1109/LMWC.2018.2860244Search in Google Scholar

[2] T. Yu, J.-H. Tsai, and Y. Chang, “A radial four-way power divider with the proposed isolation network”, IEEE Microwave and Wireless Components Letters, vol. 28, no. 3, pp. 194-196, Mar. 2018.10.1109/LMWC.2018.2800532Search in Google Scholar

[3] J. Shi, K. Xu,W. Zhang, J.-X. Chen, and G. Zhai, “An approach to 1-to-2ⁿ way microstrip balanced power divider”, IEEE Transaction on Microwave Theory and Techniques, vol. 64, no. 12, pp. 4222-4231, December 2016.Search in Google Scholar

[4] H. Fan, X. Liang, J. Geng, L. Liu, and R. Jin, “An N-way reconfigurable power divider”, IEEE Transaction on Microwave Theory and Techniques, vol. 65, no. 11, pp. 4122-4137, November 2017.Search in Google Scholar

[5] H. Chen, Y. Zhou, T. Zhang, W. Che, and Q. Xue, “N-way Gysel power divider with arbitrary power-dividing ratio”, IEEE Transaction on Microwave Theory and Techniques, vol. 67, no. 2, pp. 659-669, February 2019.10.1109/TMTT.2018.2883049Search in Google Scholar

[6] K. Song, J. Yao, C. Zhong, and S. R. Patience, “Miniaturised wideband four-way out-of-phase power divider based on Marchand balun”, IET Microwaves, Antennas & Propagation, vol. 13, Iss. 15, pp. 2682-2686, November 2019.Search in Google Scholar

[7] T. Yu, “Design of length-saving multiway Wilkinson power dividers”, IEEE Access, vol. 6, pp. 14093-14105, Mar. 2018.Search in Google Scholar

[8] C. Zhu, J. Xu, W. Kang, and W. Wu, “Four-way microstrip lumped-element reconfigurable dual-mode filtering power divider”, IEEE Transactions on industrial electronics, vol. 65, no. 3, Mar. 2018.10.1109/TIE.2017.2740854Search in Google Scholar

[9] C. Zhu, J. Xu, and W. Wu, “Microstrip four-way reconfigurable single/dual/wideband filtering power divider with tunable frequency, bandwidth, and PDR”, IEEE Transactions on industrial electronics, vol. 65, no. 11, November 2018.10.1109/TIE.2017.2787577Search in Google Scholar

[10] A. Kosc, A. D. Maria, M. Limbach, R. Horn, and A. Reigber, “A 5 way lumped-elements Wilkinson power divider”, Proceeding of European Conference on Antenna and Propagation (EuCAP), Gothenburg, pp. 357-360, April 2013.Search in Google Scholar

[11] T. Zhang, W. Che, H. Chen, andW. Feng, “A Compact four-way dual-band power divider using lumped elements”, IEEE Microwave and Wireless Components Letters, vol. 25, no. 2, pp. 94-96, February 2015.10.1109/LMWC.2014.2382681Search in Google Scholar

[12] D. M. Pozar, Microwave Engineering, 3rd Ed., New York, Wiley, 2009, chs.4, 8.Search in Google Scholar

[13] A. A. M. Saleh, “Planar electrically symmetric n-way hybrid power dividers/combiners”, IEEE Transaction on Microwave Theory and Techniques, vol. MTT-28, no.6, pp. 555563, June 1980.Search in Google Scholar

[14] A. A. M. Saleh, “Computation of the frequency response of a class of symmetric n-way power dividers”, The Bell System Technical Journal, vol. 59, no.8, pp. 1493-1512, Oct. 1980.Search in Google Scholar

[15] S.-G. Kim and K. Chang, “Ultrawide-band transitions and new microwave components using double-sided parallel-strip lines”, IEEE Transaction onMicrowave Theory and Techniques, vol. 52, no. 9, pp. 2148-2152, Sept. 2004.Search in Google Scholar

[16] H. A. Wheeler, “Transmission-line properties of parallel strips separated by a dielectric sheet”, IEEE Transaction onMicrowave Theory and Techniques, vol. MTT-13, no.2, pp. 172-185, Mar. 1965.10.1109/TMTT.1965.1125962Search in Google Scholar

[17] C. G. Sun and J. L. Li, “Design of planar multi-way differential power division network using double-sided parallel stripline”, Electronics Letters, vol. 53, no. 20, pp. 1364-1366, September 2017.Search in Google Scholar