Phase Change Heat Exchangers Made of Pin-Fins for Boiling Enhancement

Bara, M., Kmita, T., Korzekwa, J., 2016. Microstructure and properties of composite coatings obtained on aluminium alloys. Arch. Metall. Mater., 61, 1107-1112. DOI: 10.1515/amm-2016-023810.1515/amm-2016-0238Open DOISearch in Google Scholar

Čaja, A., Nemec, P., Malcho, M., 2014. Influence of the ambient temperature during heat pipe manufacturing on its function and heat transport ability, EPJ Web of Conferences, 67, art. 02012, DOI: 10.1051/epjconf/20146702012.10.1051/epjconf/20146702012Open DOISearch in Google Scholar

Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Krawczyk, M., 2018a. Simulation of Cavitation Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 1-6. DOI: 10.21741/9781945291814-110.21741/9781945291814-1Open DOISearch in Google Scholar

Domagala, M., Momeni, H., Domagala-Fabis, J., Filo, G., Kwiatkowski, D., 2018b. Simulation of Particle Erosion in a Hydraulic Valve. Materials Research Proceedings, 5, 17-24. DOI: 10.21741/9781945291814-410.21741/9781945291814-4Open DOISearch in Google Scholar

Dwornicka, R., 2014. The Impact of the Power Plant Unit Start-Up Scheme on the Pollution Load. Advanced Materials Research, 874, 63-69. DOI: 10.4028/www.scientific.net/AMR.874.6310.4028/www.scientific.net/AMR.874.63Open DOISearch in Google Scholar

Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008Open DOISearch in Google Scholar

Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018a. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009. DOI: 10.1051/matecconf/20181830300910.1051/matecconf/201818303009Open DOISearch in Google Scholar

Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018b. Modelling of pressure pulse generator with the use of a flow control valve and a fuzzy logic controller. AIP Conf. Proc., 2029, art. 020015. DOI: 10.1063/1.506647710.1063/1.5066477Open DOISearch in Google Scholar

Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133Open DOISearch in Google Scholar

Gadek-Moszczak, A., Wojnar, L. 2009. Objective, quantitative and automatic x-ray image analysis of the bone regenerate in the ilizarov method. ECS10: The 10th European Congress of Stereology and Image Analysis, Milan, Int. Society for Stereology, 453-458.Search in Google Scholar

Gawlik, J., Kielbus, A., Karpisz, D., 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena, 223, 35-45. DOI: 10.4028/www.scientific.net/SSP.223.3510.4028/www.scientific.net/SSP.223.35Open DOISearch in Google Scholar

Hosseini, R., Gholaminejad, A., Jahandar, H., 2011. Roughness effects on nucleate pool boiling of R-113 on horizontal circular copper surfaces, World Academy of Science, Engineering and Technology, 55, 679-684. DOI: 10.5281/zenodo.107806810.5281/zenodo.1078068Open DOISearch in Google Scholar

Karpisz, D., Kielbus, A., 2018. Selected problems of designing modern industrial databases. MATEC Web Conf., 183, art. 01017. DOI: 10.1051/matecconf/20181830101710.1051/matecconf/201818301017Open DOISearch in Google Scholar

Kmita, T., Bara, M., 2012. Surface oxide layers with an increased carbon content for applications in oil-less tribological systems. Chemical and Process Engineering-Inzynieria Chemiczna i Procesowa, 33, 479-486. DOI: 10.2478/v10176-012-0040-z10.2478/v10176-012-0040-zOpen DOISearch in Google Scholar

Kozien, E., Kozien, M.S., 2017. Academic governance as a determinant of efficient management of a university in Poland - legal and comparative perspective. ESD 2017: Economic and Social Development Conf., Madrid, Varazdin, 38-47.Search in Google Scholar

Krawczyk, J., Sobczyk, A., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35Open DOISearch in Google Scholar

Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Arch. Metall. Mater., 60, 2415-2419. DOI: 10.1515/amm-2015-039410.1515/amm-2015-0394Open DOISearch in Google Scholar

Maciejewska, B., Piasecka, M., 2017. Trefftz function-based thermal solution of inverse problem in unsteady-state flow boiling heat transfer in a minichannel, International Journal of Heat and Mass Transfer, 107, 925-933, DOI: 10.1016/j.ijheatmasstransfer.2016.11.003.10.1016/j.ijheatmasstransfer.2016.11.003Open DOISearch in Google Scholar

Maciejewska, B., Piasecka, M., 2017. An application of the non-continuous Trefftz method to the determination of heat transfer coefficient for flow boiling in a minichannel, Heat and Mass Transfer, 53(4), 1211-1224, DOI: 10.1007/s00231-016-1895-1.10.1007/s00231-016-1895-1Open DOISearch in Google Scholar

Nemec, P., Caja, A., Lenhard, R., 2009. Analysis of heat transfer limitation of wick heat pipe, Int. Conf. Experimental Fluid Mechanics 2009, Liberec, Czech Republic, 229-234.Search in Google Scholar

Nemec, P., Malcho, M., Kaduchova, K., 2017. Experimental measurement, calculation and thermal visualization condenser temperature of cooling device with a heat pipe technology, EPJ Web of Conferences, 143, DOI: 10.1051/epjconf/201714302078.10.1051/epjconf/201714302078Open DOISearch in Google Scholar

Nishikawa K., Fujita Y., Ohta H., Hidaka S., 1982. Effect of the surface roughness on the nucleate boiling heat transfer over the wide range of pressure, International Heat Transfer Conference, Munchen, Germany, 4, PB10, 61-66.10.1615/IHTC7.3790Search in Google Scholar

Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011Open DOISearch in Google Scholar

Orman, Ł.J., 2013. Boiling heat transfer on single phosphor bronze and copper mesh microstructures, Int. Conf. Experimental Fluid Mechanics 2013, Kutná Hora, Czech Republic, 519-522. DOI: 10.1051/epjconf/2014670208710.1051/epjconf/20146702087Open DOISearch in Google Scholar

Orman, Ł. J., 2016. Enhancement of pool boiling heat transfer with pin-fin microstructures, Journal of Enhanced Heat Transfer, 23, 137-153, DOI: 10.1615/JEnhHeatTransf.2017019452.10.1615/JEnhHeatTransf.2017019452Open DOISearch in Google Scholar

Passos, J. C., Reinaldo, R.F., 2000, Analysis of pool boiling within smooth and grooved tubes, Experimental Thermal and Fluid Science, 22, 35-44, DOI: 10.1016/S0894-1777(00)00008-X.10.1016/S0894-1777(00)00008-XOpen DOISearch in Google Scholar

Pastuszko, R., 2018. Pool boiling heat transfer on micro-fins with wire mesh Experiments and heat flux prediction, International Journal of Thermal Sciences, 125, 197-209, DOI: 10.1016/j.ijthermalsci.2017.11.019.10.1016/j.ijthermalsci.2017.11.019Open DOISearch in Google Scholar

Pastuszko, R., 2010. Pool boiling on micro-fin array with mesh structures, International Journal of Thermal Sciences, 49, 2289–2298, DOI: 10.1016/j.ijthermalsci.2010.07.016.10.1016/j.ijthermalsci.2010.07.016Open DOISearch in Google Scholar

Pastuszko, R., Wójcik, T. M., 2015. Experimental investigations and a simplified model for pool boiling on micro-fins with sintered perforated foil, Experimental Thermal and Fluid Science, 63, 34-44, DOI: 10.1016/j.expthermflusci.2015.01.002.10.1016/j.expthermflusci.2015.01.002Open DOISearch in Google Scholar

Ribatski, G., Saiz Jabardo, J. M., 2003. Experimental study of nucleate boiling of halocarbon refrigerants on cylindrical surfaces, International Journal of Heat and Mass Transfer, 46(23), 4439-4451, DOI: 10.1016/S0017-9310(03)00252-7.10.1016/S0017-9310(03)00252-7Open DOISearch in Google Scholar

Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.0202556Search in Google Scholar

Strąk, K., Piasecka, M., Maciejewska, B., 2018. Spatial orientation as a factor in flow boiling heat transfer of cooling liquids in enhanced surface minichannels, International Journal of Heat and Mass Transfer, 117, 375-387, DOI: 10.1016/j.ijheatmasstransfer.2017.10.019.10.1016/j.ijheatmasstransfer.2017.10.019Open DOISearch in Google Scholar