[Bara, M., Niedzwiedz, M. And Skoneczny, W., 2019. Influence of anodizing parameters on surface morphology and surface-free energy of Al2O3 layers produced on EN AW-5251 alloy. Materials, 12, art. 695. DOI: 10.3390/ma1205069510.3390/12050695]Open DOISearch in Google Scholar
[Bara, M., Skoneczny, W., Hajduga, M., 2009. Ceramic-graphite surface layers obtained by the duplex method on an aluminium alloy substrate. Chemical and Process Engineering, 30, 431-442.]Search in Google Scholar
[Fabis-Domagala, J., Filo, G., Momeni, H., Domagala, M., 2018. Instruments of identification of hydraulic components potential failures. MATEC Web Conf., 183, art. 03008. DOI: 10.1051/matecconf/20181830300810.1051/matecconf/201818303008]Open DOISearch in Google Scholar
[Filo, G., Fabis-Domagala, J., Domagala, M., Lisowski, E., Momeni, H., 2018. The idea of fuzzy logic usage in a sheet-based FMEA analysis of mechanical systems. MATEC Web Conf., 183, art. 03009. DOI: 10.1051/matecconf/20181830300910.1051/matecconf/201818303009]Open DOISearch in Google Scholar
[Gawlik, J., Kielbus, A., Karpisz, D., 2015. Application of an integrated database system for processing difficult material. Solid State Phenomena, 223, 35-45. DOI: 10.4028/www.scientific.net/SSP.223.3510.4028/www.scientific.net/SSP.223.35]Open DOISearch in Google Scholar
[Gądek-Moszczak A., Wojnar L., Piwowarczyk A., 2019. Comparison of selected shading correction methods. System Safety: Human – Technical Facility – Environment, 1, 819–826. DOI: 10.2478/czoto-2019-010510.2478/czoto-2019-0105]Open DOISearch in Google Scholar
[Kmita, T., Bara, M., 2012. Surface oxide layers with an increased carbon content for applications in oil-less tribological systems. Chemical and Process Engineering-Inzynieria Chemiczna i Procesowa, 33, 479-486. DOI: 10.2478/v10176-012-0040-z10.2478/v10176-012-0040-z]Open DOISearch in Google Scholar
[Kmita T., Skoneczny W., 2008. Tribological properties of anodic oxide coatings modified with molybdenum disulfide. Computer Systems Aided Science and Engineering Work in Transport, Mechanics and Electrical Engineering, Technical University of Radom.]Search in Google Scholar
[Korzekwa J., 2012. Tribological characteristics of sliding couple: Al2O3/WS2 coatings–PEEK/BG plastic. Tribologia, 43, 6, 246.]Search in Google Scholar
[Korzekwa J., Skoneczny W., Kaptacz S., 2009. The impact of the conditions of obtaining Al2O3/WS2 layers on their tribological properties, Logistyka, 6, 13th Int. Conf. Computer Systems Aided Science, Industry and Transport "TRANSCOMP 2009".]Search in Google Scholar
[Krawczyk, J., Sobczyk, A., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35]Open DOISearch in Google Scholar
[Lipinski, T., 2015. Double modification of AlSi9Mg alloy with boron, titanium and strontium. Arch. Metall. Mater., 60, 2415-2419. DOI: 10.1515/amm-2015-039410.1515/amm-2015-0394]Open DOISearch in Google Scholar
[Lipinski, T., 2018. The effect of the diameter and spacing between impurities on the fatigue strength coefficient of structural steel. Arch. Metall. Mater., 63, 519-524. DOI: 10.24425/11897010.24425/118970]Open DOISearch in Google Scholar
[Lu C., Feng X., Yang J., Jia J., Yi G., Xie E., Sun Y., 2019. Influence of surface microstructure on tribological properties of PEO-PTFE coating formed on aluminum alloy, Surface & Coatings Technology 364, 127–134. DOI: 10.1016/j.surfcoat.2019.02.06410.1016/j.surfcoat.2019.02.064]Open DOISearch in Google Scholar
[Opydo, M., Kobylecki, R., Dudek, A., Bis, Z. 2016. The effect of biomass co-combustion in a CFB boiler on solids accumulation on surfaces of P91 steel tube samples. Biomass & Bioenergy, 85, 61-68. DOI: 10.1016/j.biombioe.2015.12.01110.1016/j.biombioe.2015.12.011]Open DOISearch in Google Scholar
[Pietraszek, J., Dwornicka, R., Krawczyk, M., Kolomycki, M., 2017. The non-parametric approach to the quantification of the uncertainty in the design of experiments modelling. UNCECOMP 2017: 2nd Int. Conf. Uncertainty Quantification in Computational Sciences and Engineering, Rhodes, NTU of Athens, 598-604. DOI: 10.7712/120217.5395.1722510.7712/120217.5395.17225]Open DOISearch in Google Scholar
[Pietraszek, J., Goroshko, A., 2014. The heuristic approach to the selection of experimental design, model and valid pre-processing transformation of DoE outcome. Advanced Materials Research-Switzerland, 874, 145-149. DOI: 10.4028/www.scientific.net/AMR.874.14510.4028/www.scientific.net/AMR.874.145]Open DOISearch in Google Scholar
[Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. on Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24]Open DOISearch in Google Scholar
[Skoneczny, W., Bara, M., 2007. Aluminium oxide composite layers obtained by the electrochemical method in the presence of graphite. Materials Science-Poland, 25, 1053-1062.]Search in Google Scholar
[Skoneczny, W., Niedzwiedz, M., Bara, M., 2018. The effect of production parameters of oxide layers on their nanostructure, nanomorphology and surface free energy. Applied Sciences-Basel, 8, art. 2251. DOI: 10.3390/app811225110.3390/app8112251]Search in Google Scholar
[Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.]Search in Google Scholar
[Wang Z., Wu L., Qi Y., Cai W., Jiang Z., 2010. Self-lubricating Al2O3/PTFE composite coating formation on surface of aluminium alloy, Surface & Coatings Technology 204, 3315–3318. DOI: 10.1016/j.surfcoat.2010.03.04910.1016/j.surfcoat.2010.03.049]Open DOISearch in Google Scholar