Quality Improvement of a Safety Valve with the Use of Numerical and Experimental Studies

Beune, A., Kuerten, J.G.M., van Heumen, M.P.C., 2012. CFD analysis with fluid–structure interaction of opening high-pressure safety valves, Computers & Fluids 64, 108-116, DOI:10.1016/j.compfluid.2012.05.010.10.1016/j.compfluid.2012.05.010Open DOISearch in Google Scholar

Bjerre, M., Eriksen, J.G.I., Andreasen, A., Stegelmann, C., Mando, M., 2017. Analysis of Pressure Safety Valves for fire protection on offshore oil and gas installations, Process Safety and Env. Protection 105, 60-68, DOI: 10.1016/j.psep.2016.10.008.10.1016/j.psep.2016.10.008Open DOISearch in Google Scholar

Dempster, W., Alshaikh, M., 2015. An Investigation of the Two Phase Flow and Force Characteristics of a Safety Valve, Procedia Engineering 130, 77-86, DOI: 10.1016/j.proeng.2015.12.177.10.1016/j.proeng.2015.12.177Open DOISearch in Google Scholar

Dossena, V., Franchina, N., Savini, M., Marinoni, F., Cecchi, F., Bassi, F., 2017. Reynolds number effects on the performance of safety valves operating with incompressible flows, Journal of Loss Prevention in the Process Industries 49, 525-535, DOI: 10.1016/j.jlp.2017.05.020.10.1016/j.jlp.2017.05.020Open DOISearch in Google Scholar

Dossena, V., Marinoni, F., Bassi, F., Franchina, N., Savini, M., 2013. Numerical and experimental investigation on the performance of safety valves operating with different gases, International Journal of Pressure Vessels and Piping 104, 21-29, DOI: 10.1016/j.ijpvp.2013.01.002.10.1016/j.ijpvp.2013.01.002Open DOISearch in Google Scholar

Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133Open DOISearch in Google Scholar

Galbally, D., Garcia, G., Hernando, J., de Dios Sanchez, J., 2015. Analysis of pressure oscillations and safety relief valve vibrations in the main steam system of a Boiling Water Reactor, Nuclear Engineering and Design 293, 258–271, DOI: 10.1016/j.nucengdes.2015.08.005.10.1016/j.nucengdes.2015.08.005Open DOISearch in Google Scholar

Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-008810.2478/czoto-2019-0088Open DOISearch in Google Scholar

Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20^th Int. Sci. Conf. Economic and Social Development, Prague, Varazdin, 538-545.Search in Google Scholar

Kozien, E., Kozien, A., 2017. Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland - legal and economic perspective. 26^th Int. Sci. Conf. Economic and Social Development, Zagreb, Varazdin, 326-335.Search in Google Scholar

Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35Open DOISearch in Google Scholar

Lisowski E., Filo G., 2016. CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape, Energy Conversion and Management 123, 15-28, doi:10.1016/j.enconman.2016.06.025.10.1016/j.enconman.2016.06.025Open DOISearch in Google Scholar

Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method, Flow Measurement and Instrumentation 53, 269–278, DOI: 10.1016/j.flowmeasinst.2016.12.009.10.1016/j.flowmeasinst.2016.12.009Open DOISearch in Google Scholar

Manimaran, A., Hiremath, S.S., Shekhar, P., 2016. Dynamic Simulation and Validation of a Vent and Safety Valve for Cryogenic Flight Tanks, Procedia Technology 25, 1320-1334, DOI:10.1016/j.protcy.2016.08.232.10.1016/j.protcy.2016.08.232Open DOISearch in Google Scholar

Miller, C., Bredemyer, L., 2007. Innovative safety valve selection techniques and data, Journal of Hazardous Materials 142, 685-688, doi: 10.1016/j.jhazmat.2006.06.072.10.1016/j.jhazmat.2006.06.07217011117Open DOISearch in Google Scholar

Moncalvo, D., Friedel, L., 2010. A viscosity correction factor for shear-thinning liquid flows in safety valves, Journal of Loss Prevention in the Process Industries 23, 289-293, DOI: 10.1016/j.jlp.2009.10.008.10.1016/j.jlp.2009.10.008Open DOISearch in Google Scholar

Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31Open DOISearch in Google Scholar

Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24Open DOISearch in Google Scholar

Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-4210.21741/9781945291814-42Open DOISearch in Google Scholar

Radek, N., Pasieczynski, L., Makrenek, M., Dudek, A., 2018. Mechanical Properties of Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 243-247. DOI: 10.21741/9781945291814-4310.21741/9781945291814-43Open DOISearch in Google Scholar

Scuro, N.L., Angelo, E., Angelo, G., Andrade, D.A., 2018. A CFD analysis of the flow dynamics of a directly-operated safety relief valve, Nuclear Engineering and Design 328, 321-332, DOI: 10.1016/j.nucengdes.2018.01.024.10.1016/j.nucengdes.2018.01.024Open DOISearch in Google Scholar

Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.020255610.1371/journal.pone.0202556Search in Google Scholar

Song, X.G., Wang, L.T., Park, Y.C., Sun, W., 2015. A Fluid-Structure Interaction Analysis of the Spring-Loaded Pressure Safety Valve during Popping Off, Procedia Engineering 130, 87-94, DOI: 10.1016/j.proeng.2015.12.178.10.1016/j.proeng.2015.12.178Open DOISearch in Google Scholar

Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27^th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.Search in Google Scholar

Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: DOI: 10.21741/9781945291814-710.21741/9781945291814-7Open DOISearch in Google Scholar