<abstract xmlns="http://www.w3.org/1999/xhtml"><p>In this paper we proposed to identify the optimum milling parameter required for finishing processes performed on 3Dprinted parts from ABS and PLA materials. We have identified the optimum milling parameters for a constant spindle speed of 3500 rot/min for face milling and profile contouring operations with different tools diameters. The study was performed on 3D printed specimens from ABS and PLA materials.</p></abstract>

In this paper we proposed to identify the optimum milling parameter required for finishing processes performed on 3Dprinted parts from ABS and PLA materials. We have identified the optimum milling parameters for a constant spindle speed of 3500 rot/min for face milling and profile contouring operations with different tools diameters. The study was performed on 3D printed specimens from ABS and PLA materials.

Study Regarding the Optimal Milling Parameters for Finishing 3D Printed Parts from ABS and PLA Materials

Faculty of Engineering/Department of Industrial Engineering and Management

Acta Universitatis Cibiniensis. Technical Series

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this paper we proposed to identify the optimum milling parameter required for finishing processes performed on 3Dprinted parts from ABS and PLA materials....

Study Regarding the Optimal Milling Parameters for Finishing 3D Printed Parts from ABS and PLA Materials

Published Online: Dec 26, 2018

Page range: 66 - 72

DOI: https://doi.org/10.2478/aucts-2018-0009

Keywords
Additive Manufacturing, Roughness, CNC milling

© 2018 Pămărac Răzvan Gabriel et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Study Regarding the Optimal Milling Parameters for Finishing 3D Printed Parts from ABS and PLA Materials

Published Online: Dec 26, 2018

Page range: 66 - 72

DOI: https://doi.org/10.2478/aucts-2018-0009

KeywordsAdditive Manufacturing, Roughness, CNC milling

© 2018 Pămărac Răzvan Gabriel et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
Additive Manufacturing, Roughness, CNC milling