Problems of the Starting and Operating of Hydraulic Components and Systems in Low Ambient Temperature (Part V)

1. Dymarski C.: An integrated hydraulic drive system of a novel device for launching lifeboats from large passenger ship. Polish Maritime Research. Vol. 19, 1/2012.10.2478/v10012-012-0001-yOpen DOISearch in Google Scholar

2. Dziewulski W.: Outline of machine hydraulics in shipbuilding industry (in Polish), Wydawnictwo Morskie, Gdansk 1985.Search in Google Scholar

3. Jasiński R.: Influence of design of hydraulic motors on their operation in low ambient temperatures (in Polish). International Scientific-Technical Conference „Hydraulics and Pneumatics’2007”, Wroclaw, 2007.Search in Google Scholar

4. Jasiński R.: Research and method for assessment of operation of hydraulic drive components started in low ambient temperature and supplied with hot working medium (in Polish). Report on execution of the research project financed by Polish Ministry of Science and Higher Education (in Polish), No. 4 T07C042 30, Gdansk 2010.10.2478/v10012-008-0052-2Search in Google Scholar

5. Jasiński R.: Operation of selected low-speed hydraulic motors in thermal shock conditions (in Polish). Ph.D. thesis, supervisor: A. Balawender. Gdansk 2002.Search in Google Scholar

6. Jasiński R.: Influence of design of hydraulic components on their operation in low ambient temperatures. Key Engineering Materials, Fundamentals of Machine Design, Vol. 490, 2012.10.4028/www.scientific.net/KEM.490.106Search in Google Scholar

7. Jasiński R.: Methodology of examination of low-speed hydraulic motors in thermal shock conditions (in Polish), IX Seminar on drives and control 2003, Gdansk, 2003.Search in Google Scholar

8. Jasiński R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part I). Polish Maritime Research, 4/2008.10.2478/v10012-008-0052-2Search in Google Scholar

9. Jasiński R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part II). Determining the clearance between cooperating elements during the hydraulic components start-up in extremely low ambient temperatures on the grounds of experimental research. Polish Maritime Research, 1/2009.10.2478/v10012-008-0012-xSearch in Google Scholar

10. Jasiński R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part III). Methods of determining parameters for correct start-ups of hydraulic components and systems in low ambient temperatures. Polish Maritime Research, 4/2009.10.2478/v10012-008-0052-2Search in Google Scholar

11. Jasiński R.: System for heating a cold hydraulic satellite motor (in Polish). Patent no. 214740. Patent application no. P.393921 accepted by UP RP in 2011.Search in Google Scholar

12. Jasiński R., Zelewski J.: Protection system for a hydraulic satellite motor started in thermal shock conditions (in Polish). Patent PL 224464. Patent application P393922 accepted by UP RP in 2011.Search in Google Scholar

13. Landvogt B.; Osiecki L.; Patrosz P.; Zawistowski T.; Zylinski B.: Numerical simulation of fluid-structure interaction in the design process for a new axial hydraulic pump. Progress in Computational Fluid Dynamics. Vol. 14, No. 1, 2014. Doi: 10.1504/PCFD.2014.059198.10.1504/PCFD.2014.059198Open DOISearch in Google Scholar

14. Pobedza J., Sobczyk A.: Properties of high pressure water hydraulic components with modern coatings. Advanced Materials Research. Trans Tech Publications Ltd, 849/2014. doi: 10.4028/www.scientific.net/AMR.849.100.Search in Google Scholar

15. Smotrycki S.: Marine hydraulic drives (in Polish), Wydawnictwo Morskie, Gdansk, 1970.Search in Google Scholar

16. Śliwiński P.: Influence of water and mineral oil on the leaks in satellite motor commutation unit clearances. Polish Maritime Research, vol. 24, 3(95) 2017. Doi: 10.1515/pomr-2017-0090.10.1515/pomr-2017-0090Open DOISearch in Google Scholar

17. Śliwiński P.: The influence of water and mineral oil on the mechanical losses in a hydraulic motor. Chinese Journal of Mechanical Engineering. Article accepted for publication.Search in Google Scholar

18. Śliwiński P.: The influence of water and mineral oil on volumetric losses in a hydraulic motor. Polish Maritime Research, vol. 24, 2017. Doi: 10.1515/pomr-2017-0041.10.1515/pomr-2017-0041Open DOISearch in Google Scholar

19. Śliwiński P.: The basics of design and experimental tests of the commutation unit of a hydraulic satellite motor. Archives of Civil and Mechanical Engineering, No 16/2016, DOI: 10.1016/j.acme.2016.04.003.10.1016/j.acme.2016.04.003Open DOISearch in Google Scholar

20. Śliwiński P.: The flow of liquid in flat gaps of satellite motors working mechanism. Polish Maritime Research, No 2/2014.10.2478/pomr-2014-0019Search in Google Scholar

21. Śliwiński P.: New satellite pumps. Key Engineering Materials, No 490/2012.10.4028/www.scientific.net/KEM.490.195Search in Google Scholar

22. Walczak P., Sobczyk A.: Simulation of water hydraulic control system of Francis turbine. American Society of Mechanical Engineers, 2014. doi: dx.doi.org/10.1115/ FPNI2014-7814.Search in Google Scholar

23. Wiśniewski S., Wiśniewski T.: Heat transfer (in Polish). WNT, Warsaw 2000.Search in Google Scholar

24. Zelewski J.: Modernisation project of a satellite motor without axial clearance compensation, resistant to thermal shock conditions, in application to hydraulic ship deck hoisting winch (in Polish). Diploma thesis, supervisor: R. Jasiński, Gdansk University of Technology, 2004.Search in Google Scholar

25. Złoto T., Nagorka A.: An efficient FEM for pressure analysis of oil film in a piston pump. Applied Mathematics and Mechanics, vol.30, No 1/2009.10.1007/s10483-009-0106-zSearch in Google Scholar

26. Environmental tests of ship equipment (in Polish). Polish Register of Shipping, Gdansk, 1975.Search in Google Scholar

27. Polish Register of Shipping, “Publication 11P” (in Polish), 1994.Search in Google Scholar

28. Polish Register of Shipping, “Rules for the Classification and Construction of Sea-going Ships” (in Polish), 2002.Search in Google Scholar

29. Technical information documentation: Hydraulic motors SOK produced by ZUO Hydroster (in Polish).Search in Google Scholar

30. PN-86/M-73079 “General conditions of use of unified hydraulics system” (in Polish).Search in Google Scholar

31. Information on http://hydro-precyzja.pl.Search in Google Scholar

32. Catalogues of companies: Bosch-Rexroth, Sauer-Danfoss, Parker.Search in Google Scholar