[1. Balawender A.: Energy analysis and testing methods of slow-speed hydraulic motors (in Polish). Zeszyty Naukowe PG. Gdańsk 1988.]Search in Google Scholar
[2. Jasiński R.: Operation of selected slow-speed hydraulic motors in thermal shock conditions (in Polish). Doctorate thesis, supervisor: A. Balawender. Gdańsk 2002.
]Search in Google Scholar
[3. Jasiński R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part I). Polish Maritime Research, 4/2008.10.2478/v10012-007-0095-9]Open DOISearch in Google Scholar
[4. Jasiński R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part II). Determining the clearance between cooperating elements during the hydraulic components start-up in extremely low ambient temperatures on the grounds of experimental research. Polish Maritime Research, 1/2009.10.2478/v10012-008-0012-x]Search in Google Scholar
[5. Jasiński R.: Problems of the starting and operating of hydraulic components and systems in low ambient temperature (Part III). Methods of determining parameters for correct start-ups of hydraulic components and systems in low ambient temperatures. Polish Maritime Research, 4/2009.10.2478/v10012-008-0052-2]Search in Google Scholar
[6. Jasiński R.: Research and method for assessment of operation of hydraulic drive components started in low ambient temperature and supplied with hot working medium (in Polish). Report on execution of the research project financed by Polish Ministry of Science and Higher Education (in Polish), No. 4 T07C042 30, Gdańsk 2010.10.2478/v10012-008-0052-2]Search in Google Scholar
[7. Jasiński R.: Operation of hydraulic drives in low ambient temperatures. Part II (in Polish). Hydraulika i Pneumatyka, 2/2011.]Search in Google Scholar
[8. Jasiński R.: Operation of hydraulic drives in low ambient temperatures. Part V (in Polish). Hydraulika i Pneumatyka, 6/2011.]Search in Google Scholar
[9. Jasiński R.: Determination of ability of machines with hydraulic drive during start-up in low ambient temperatures. Journal of KONES Powertrain and Transport, Vol 1, No. 16, 2009.10.2478/v10012-008-0012-x]Search in Google Scholar
[10. Jasiński R.: Determination of ability of hydrotronic systems to start in low ambient temperatures. Solid State Phenomena. - Vol. 164, 2010.10.4028/www.scientific.net/SSP.164.31]Search in Google Scholar
[11. Jasiński R.: Experimental tests of axial piston pump PWK 27 from HYDROTOR company in low ambient temperatures (in Polish). Napędy i Sterowanie, 4/2008.]Search in Google Scholar
[12. Jasiński R., Lewandowski P.: Modelling the heating process of axial piston pump PWK 27 from HYDROTOR company during start-up in low ambient temperatures (in Polish). Napędy i Sterowanie, 6/2008.]Search in Google Scholar
[13. Kleiber M.: Introduction to finite elements method (in Polish). PWN, Warszawa-Poznań, 1989.]Search in Google Scholar
[14. Landvogt B.; Osiecki L.; Patrosz P.; Zawistowski T.; Zylinski B.: Numerical simulation of fluid-structure interaction in the design process for a new axial hydraulic pump. Progress in Computational Fluid Dynamics. Vol. 14, No. 1, 2014. doi: 10.1504/PCFD.2014.059198.10.1504/PCFD.2014.059198]Open DOISearch in Google Scholar
[15. Osiecki A., Osiecki L.: Development efforts on new design of axial piston pumps (in Polish). Hydraulika i Pneumatyka 4/1998, pp. 4–9.]Search in Google Scholar
[16. Osiecki L., Patrosz P., Zawistowski T., Landvogt B., Piechna J., Żyliński B.: Compensation of pressure peaks in PWK-type hydraulic pumps. Key Engineering Materials. Vol. 490., (2012), s.33-44. doi: 10.4028/www.scientific.net/KEM.490.33.10.4028/www.scientific.net/KEM.490.33]Open DOISearch in Google Scholar
[17. Paszota Z.: Energy losses in hydrostatic drive. LABERT Academic Publishing, 2016.]Search in Google Scholar
[18. Paszota Z.: Energy losses in the hydraulic rotational motor - definitions and relations for evaluation of the efficiency of motor and hydrostatic drive. Polish Maritime Research 2(65)/2010.10.2478/v10012-010-0017-0]Search in Google Scholar
[19. Pobędza J., Sobczyk A.: Properties of high pressure water hydraulic components with modern coatings. Advanced Materials Research. Trans Tech Publications Ltd, 849/2014. doi: 10.4028/www.scientific.net/AMR.849.100.10.4028/www.scientific.net/AMR.849.100]Open DOISearch in Google Scholar
[20. Rusiński E.: Finite elements method. COSMOS/M System (in Polish). Wydawnictwa Komunikacji i Łączności, Warszawa 1994.]Search in Google Scholar
[21. Szargut J.: Numerical modelling of temperature fields (in Polish). WNT, Warszawa 1992.]Search in Google Scholar
[22. Śliwiński P.: The influence of water and mineral oil on the mechanical losses in a hydraulic motor. Chinese Journal of Mechanical Engineering. Article accepted for publication.]Search in Google Scholar
[23. Śliwiński P.: Influence of water and mineral oil on the leaks in satellite motor commutation unit clearances. Polish Maritime Research. Article accepted for publication.]Search in Google Scholar
[24. Śliwiński P.: The influence of water and mineral oil on volumetric losses in a hydraulic motor. Polish Maritime Research, vol. 24, 2017. Doi: 10.1515/pomr-2017-0041.10.1515/pomr-2017-0041]Open DOISearch in Google Scholar
[25. Śliwiński P.: The basics of design and experimental tests of the commutation unit of a hydraulic satellite motor. Archives of Civil and Mechanical Engineering, No. 16/2016, DOI: 10.1016/j.acme.2016.04.003.10.1016/j.acme.2016.04.003]Open DOISearch in Google Scholar
[26. Śliwiński P.: The flow of liquid in flat gaps of satellite motors working mechanism. Polish Maritime Research, No. 2/2014.10.2478/pomr-2014-0019]Search in Google Scholar
[27. Śliwiński P.: New satellite pumps. Key Engineering Materials, No. 490/2012.10.4028/www.scientific.net/KEM.490.195]Search in Google Scholar
[28. Wiśniewski S., Wiśniewski T.: Heat exchange (in Polish). WNT, Warszawa 2000.]Search in Google Scholar
[29. Walczak P., Sobczyk A.: Simulation of water hydraulic control system of francis turbine. American Society of Mechanical Engineers, 2014. doi: dx.doi.org/10.1115/FPNI2014-7814.10.1115/FPNI2014-7814]Open DOISearch in Google Scholar
[30. Rutkiewicz Ł.: Experimental tests of operation of a proportional spool valve in low ambient temperature conditions (in Polish). Diploma thesis, supervisor: R. Jasiński, Gdańsk University of Technology, Gdańsk, 2006.]Search in Google Scholar
[31. Staniszewski B.: Heat exchange (in Polish). PWN, Warszawa, 1980.]Search in Google Scholar
[32. Złoto T., Nagorka A.: An efficient FEM for pressure analysis of oil film in a piston pump. Applied Mathematics and Mechanics, Vol.30, No. 1/2009.10.1007/s10483-009-0106-z]Search in Google Scholar
[33. Catalogues from Hydrotor company.]Search in Google Scholar
[34. Catalogues from Parker company.]Search in Google Scholar
[35. Catalogues from Sauer-Danfoss company.]Search in Google Scholar