Calculation Method for Flow Boiling and Flow Condensation of R134a and R1234yf in Conventional and Small Diameter Channels

1. United Nations Environment Program (UNEP) Montreal Protocol on Substances that Deplete the Ozone Layer, 1997.Search in Google Scholar

2. IPPC, Climate Change, Cambridge University Press, Cambridge, United Kingdom, 2001.Search in Google Scholar

3. Ghodbane M.: An investigation of R152a and hydrocarbon refrigerants in mobile air conditioning, Int. Proceedings of International Congress and Exposition, Detroit, Paper no. 1999-01-0874, Warrendale, PA.10.4271/1999-01-0874Search in Google Scholar

4. Lorentzen G.: Revival of carbon dioxide as refrigerant, Int. J. Refrigeration 17 (3), 1994, pp. 292-301.10.1016/0140-7007(94)90059-0Search in Google Scholar

5. Zhao Y., Liang Y., Sun Y., Chen J.: Development of a mini-channel evaporator model using R1234yf as working fluid, 35, 2012, pp. 2166-2178.10.1016/j.ijrefrig.2012.08.026Search in Google Scholar

6. Minor B., Spatz M.: HFO-1234yf low GWP refrigerant update, Int. International Refrigeration and Air Conditioning Conference at Purdue, West Lafayette, IN, USA. Paper no 2349.Search in Google Scholar

7. Refprop v 9.0, National Institute of Standards (NIST), 2010.Search in Google Scholar

8. Park K. J., Jung D.: Nucleate boiling heat transfer coefficients or R1234yf on plain and low fin surfaces, Int. J. Refrigeration 33 (3), 2010, pp. 553-557.10.1016/j.ijrefrig.2009.12.020Search in Google Scholar

9. Lu M-C., Tong J-R., W C-C.: Investigation of the twophase convective boiling of HFO-1234yf in a 3.9 mm diameter tube, Int. J. Heat and Mass Transfer, 65, 2013, pp. 545-551.10.1016/j.ijheatmasstransfer.2013.06.004Search in Google Scholar

10. Del Col D., Bortolini S., Torresin D., Cavallini A.: Flow boiling of R1234yf in a 1 mm diameter channel, Int. J. of Refrigeration, 36, 2013, pp. 353-362.10.1016/j.ijrefrig.2012.10.026Search in Google Scholar

11. Satioh S., Dang C., Nakamura Y., Hihara E.: Boiling heat transfer of HFO-1234yf flowing in a smooth smalldiameter horizontal tube, Int. J. Refrigeration, 33, 2011, pp. 1846-1853.10.1016/j.ijrefrig.2011.05.018Search in Google Scholar

12. Copetti J. B., Macaganan M. H., Zinani F.: Experimental study on R-600a boiling in 2.6 mm tube, Int. J. Refrigeration, 33, 2013, pp. 325-334.10.1016/j.ijrefrig.2012.09.007Search in Google Scholar

13. Kwang-Il Choi, Jong Taek Oh, Kiyoshi Satio, Jong Soo Jeong: Comparison of Heat Transfer Coefficient during Evaporation of Natural Refrigerants and R-1234yf in Horizontal Small Tube, Int. J. Refrigeration, 2014, 41, pp. 210-218.10.1016/j.ijrefrig.2013.06.017Search in Google Scholar

14. Kundu A., Kumar R., Gupta A.: Heat transfer characteristic and flow pattern during two-phase flow boiling of R134a and R407C in a horizontal smooth tube, Experimental Thermal and Fluid Science, 57, 2014, pp. 344-352.10.1016/j.expthermflusci.2014.05.020Search in Google Scholar

15. Xu Y., Fang X., Li G., Li D.: An experimental study of flow boiling heat transfer of R134a and evaluation of existing correlations, Int. J. Heat and Mass Transfer, 92, 2016, pp. 1143-1157.10.1016/j.ijheatmasstransfer.2015.09.044Search in Google Scholar

16. Mancin S., Diani A., Rossetto L.: R134a flow boiling heat transfer coefficient and pressure drop inside 3.4 mm ID microfin tube, Energy Proceedia, 45, 2014, pp. 608-615.10.1016/j.egypro.2014.01.065Search in Google Scholar

17. Tibirçá C. B., Ribatski G.: Flow boiling heat transfer of R134a and R245fa in 2.3 mm tube, Int. J. Heat and Mass Transfer, 53, 2010, pp. 2459-2468.10.1016/j.ijheatmasstransfer.2010.01.038Search in Google Scholar

18. Diani A., Mancin S., Rossetto L.: Flow boiling heat transfer of R1234yf inside 3.4 mm ID microfin tube, Experimental Thermal and Fluid Science, 66, 2015, pp. 127-136.10.1016/j.expthermflusci.2015.03.019Search in Google Scholar

19. Owhaib W., Martin-Callizo C., Palm B.: Evaporative heat transfer in vertical circular microchannels, Applied Thermal Engineering, 24, 2004, pp. 1241-1253.10.1016/j.applthermaleng.2003.12.030Search in Google Scholar

20. Shiferaw D., Karayiannis T. G., Kenning D. B. R.: Flow boiling in a 1.1 mm tube with R134a: experimental results and comparison with model, Int. J. Thermal Sciences, 48, 2009, pp. 331-341.Search in Google Scholar

21. Martin-Callizo C., Ali R., Palm B.: New experimental results of flow boiling of R134a in vertical microchannel, Heat Transfer Conference Proceedings, Edinburgh 10-11 September, 2007, UK.Search in Google Scholar

22. Consolini L., Thome J. R.: Micro-channel flow boiling heat transfer or R134a, R236fa and R245fa, Microfluid Nanofluids 6, 2009, pp. 731-746.10.1007/s10404-008-0348-7Search in Google Scholar

23. Mahmoud M. M., Kenning D. B. R., Karayiannis T. G.: Single and two phase heat transfer and pressure drop in a 0.52 mm vertical metallic tube, 7th Int. Conference in Enhanced, Compact and Ultra-compact Heat Exchangers: From Microscale Phenomena to Industrial Applications, September 13-18, Heredia, Costa Rica, 2012.Search in Google Scholar

24. Ong C. I., Thome J. R.: Flow boiling heat transfer of R134a, R236f and R245fa in a horizontal 1.030 mm circular channel, Exp. Therm. Fluid Sci., 33, 2009, pp. 651-663.10.1016/j.expthermflusci.2009.01.002Search in Google Scholar

25. Anwar Z., Palm B., Khodabandeh R.: Flow boiling heat transfer, pressure drop and dryout characteristics of R1234yf: Experimental results and predictions, Experimental Thermal and Fluid Science, 66, 2015, pp. 137-149.10.1016/j.expthermflusci.2015.03.021Search in Google Scholar

26. Mortada S., Zoughaib A., Arzano-Daurelle C., Clodic D.: Boiling heat transfer and pressure drop of HFC-134a and R-1234yf in minichannels for low mass fluxes, Int. J. Refrigeration, 35, 2012, pp. 962-973.10.1016/j.ijrefrig.2012.03.004Search in Google Scholar

27. Ribatski G.: A critical overview on the recent literature concerning flow boiling and two - phase flows inside microscale channels, ECI 8th Int. Conference on Boiling and Condensation Heat Transfer, 3 - 7 June 2012, Lausanne, Switzerland.10.1080/08916152.2012.737189Search in Google Scholar

28. Tibirçá C. B., Ribatski G.: Flow boiling in micro-scale channels - Synthesized literature review, Int. J. Refrigeration, 36, 2013, pp. 301 - 324. 10.1016/j.ijrefrig.2012.11.019Search in Google Scholar

29. Sardeshpande M., Ranade V.: Two - phase flow boiling in small channels: A brief review, Sadhana, 38, 2013, pp. 1083 - 1126.10.1007/s12046-013-0192-7Search in Google Scholar

30. Alagesan V.: Flow boiling heat transfer in mini and micro channels - A state of the art review, Int. J. ChemTech Research, 4, 2012, pp. 1247 - 1259.Search in Google Scholar

31. Mikielewicz D., Mikielewicz J., Tesmar J.: Improved semiempirical method for determination of heat transfer coefficient in flow boiling in conventional and small diameter tubes, International Journal of Heat and Mass Transfer, 50(19-20), 2007, pp. 3949-3956.10.1016/j.ijheatmasstransfer.2007.01.024Search in Google Scholar

32. Mikielewicz D., Andrzejczyk R., Jakubowska B., Mikielewicz J.: Analytical model with non-adiabatic effects for pressure drop and heat transfer during boiling and condensation flows in conventional channels and minichannels, Heat Transfer Engineering, 37(13-14), 2016, pp. 1158-1171.10.1080/01457632.2015.1112213Search in Google Scholar

33. Muller-Steinhagen R., Heck K.: A simple friction pressure drop correlation for two-phase flow in pipes, Chem. Eng. Progress, 20, 1986.10.1016/0255-2701(86)80008-3Search in Google Scholar

34. Cooper M. G.: Saturation nucleate pool boiling; a simple correlation, Int. Chem. Eng. Symposium 1, 86, 1984, pp. 785 - 793.10.1016/B978-0-85295-175-0.50013-8Search in Google Scholar

35. Kew P., Cornwell K.: Correlations for the prediction of boiling heat transfer in small diameter channels, Applied Thermal Engineering, 17, 8 - 10, (1997), 705 - 715.Search in Google Scholar

36. Deja M., Siemiątkowski M.S.: Feature-based generation of machining process plans for optimised parts manufacture. Journal of Intelligent Manufacturing, 2013, Vol.24, No.4, pp. 831-846.10.1007/s10845-012-0633-xSearch in Google Scholar

37. Szłapczyński R.: Evolutionary Planning of Safe Ship Tracks in Restricted Visibility. Journal of Navigation, 2015, Vol.68, No.1, pp.39-51.10.1017/S0373463314000587Search in Google Scholar

38. Stolarski T.A.: Wear of water-lubricated composite materials. Wear, 1980, Vol.58, No.1, pp. 103-108.10.1016/0043-1648(80)90215-XSearch in Google Scholar

39. Jakubowski M.: Influence of pitting corrosion on fatigue and corrosion fatigue of ship and offshore structures. Part II: Load - pit crack interaction. Polish Maritime Research, 2015, Vol.22, No.3, pp. 57-66.10.1515/pomr-2015-0057Search in Google Scholar

40. Ambroziak A., Kłosowski P.: Mechanical properties for preliminary design of structures made from PVC coated fabric. Construction and Building Materials, 2014, 50, pp. 74-81. 10.1016/j.conbuildmat.2013.08.060Search in Google Scholar