The research of anti corrosive properties of various compositions on samples of standard metals

1. Rozenfeld, I.L. 1981. Corrosion Inhibitors; McGraw-Hill. New York. p. 182.Search in Google Scholar

2. Roberge, P.R. 2008. Corrosion Engineering Principle and Practice. McGraw-Hill. New York. 730 p.Search in Google Scholar

3. McCoy, J.S. (2006). Introduction: Tracing the Historical Development of Metalworking Fluids, in Metalworking Fluids; Byers. J.P. Ed.; 2nd edition. Taylor & Francis. New York. pp. 1–18.Search in Google Scholar

4. Brinksmeier, E., Meyer, D., Huesmann-Cordes, A.G. & Herrmann, C. (2015). Metalwor-king fluids-Mechanisms and performance. CIRP Ann. Manufact. Technol. 64, 605–628 (http://creativecommons.org/licenses/by-nc-nd/4.0/).Search in Google Scholar

5. Hugh Spikes (2008). Low- and zero-sulphated ash. phosphorus and Sulphur anti-wear additives for engine oils. Lubrication Sci. 20, 103–136 DOI: 10.1002/ls.57.10.1002/ls.57Open DOISearch in Google Scholar

6. Fouda, A.S., Elmorsi, M.A. & Abou-Elmagd, B.S. (2017). Adsorption and inhibitive properties of methanol extract of Eeuphorbia Heterophylla for the corrosion of copper in 0.5 M nitric acid solutions. Pol. J. Chem. Technol. 19(1), 95–103. DOI: 10.1515/pjct-2017-0014.10.1515/pjct-2017-0014Search in Google Scholar

7. Dharma, R., Kodali. (2002). “High performance ester lubricants from natural oils”. Ind. Lubr. Tribol. 54(4) 165–170. http://dx.doi.org/10.1108/0036879021043171810.1108/00368790210431718Open DOISearch in Google Scholar

8. Zvirko, O.I., Mytsyk, A.B., Tsyrulnyk, O.T., Gabetta, G. & Nykyforchyn, H.M. (2017). Corrosion Degradation of Steel of an Elbow of Gas Pipeline with Large-Scale Delamination after Long-Term Operation. Mater. Sci. 52(6). 861–865 https://doi.org/10.1007/s11003-017-0032-8.10.1007/s11003-017-0032-8Search in Google Scholar

9. Ghai, I., Wentz, J., DeVor, R.E., Kapoor, S.G. & Samuel, J. (2010). Droplet behavior on a rotating surface for atomization-based cutting fluid application in micromachining. J. Manuf. Sci. Eng. 132(1). 011017 DOI:10.1115/1.400085910.1115/1.4000859Open DOISearch in Google Scholar

10. Myshkin, N.K. & Markova, L.V. (2016). Methods and Instruments for Condition Monitoring of Lubricants. In: On-line Condition Monitoring in Industrial Lubrication and Tribology. Appl. Condit. Monitoring, 8, 1–29 Springer. Cham. https://doi.org/10.1007/978-3-319-61134-1_110.1007/978-3-319-61134-1_1Search in Google Scholar

11. Zhao, F., Urbance, M. & Skerlos, S.J. (2004). Mechanistic Model of Coaxial Microfiltration for Semi-Synthetic Metalworking Fluid Microemulsions. J. Manufact. Sci. Enginee. 126(3), 435. http://doi.org/10.1115/1.1763187.10.1115/1.1763187Open DOISearch in Google Scholar

12. Shujun, Gao, Peng, Jin, Bruce, Brown and etc. (2017). Corrosion behavior of mild steel in sour environments at elevated temperatures. Corrosion. Vol. 73. No. 8. pp. 915–926 https://doi.org/10.5006/236610.5006/2366Open DOISearch in Google Scholar

13. Aiad, I., Riya, M.A., Tawfik, S.M. & Abousehly, A.M. (2016). Protection of carbon steel against corrosion in hydrochloric acid solution by some synthesized cationic surfactants. 52: 339. https://doi.org/10.1134/S207020511602002710.1134/S2070205116020027Open DOISearch in Google Scholar

14. Skerlos, S.J., Rajagopalan, N., DeVor, R.E., Kapoor, S.G. & Angspatt, V.D. (2001). Microfiltration of Polyoxyalkylene Metalworking Fluid Lubricant Additives Using Aluminum Oxide Membranes. J. Manufact. Sci. Enginee. 123(4), 692. http://doi.org/10.1115/1.1392993.10.1115/1.1392993Open DOISearch in Google Scholar

15. Thomas Norrby. (2003). Environmentally adapted lubricants – where are the opportu-nites? Ind. Lubr. Tribol. 5(6), 268–274. https://doi.org/10.1108/00368790310496400.10.1108/00368790310496400Open DOISearch in Google Scholar

16. Skerlos, S.J. (2011). Cutting Fluids and their Environmental Impact. Chap. Encyclop. Tribol. Springer. http://doi.org/10.1007/978-0-387-92897-5.10.1007/978-0-387-92897-5Open DOISearch in Google Scholar

17. MacLean, D., Hayes, K., Barnard, T., Hull, T., Park, Y.E. & Skerlos, S.J. (2009). Impact of Supercritical Carbon Dioxide Metalworking Fluids on Tool Life in turning of Sintered Steel and Milling of Compacted Graphite Iron. Proceed. ASME Inter. Manufact. Sci. Enginee. Conference 2009. MSEC2009, October 4–7, 2009. West Lafayette. Indiana. USA. pp. 43–48.10.1115/MSEC2009-84026Search in Google Scholar

18. Singh, B.P., Nayak., S., Nanda. K., Bikash, K.J., Bhattacharjee, S. & Besra, L. (2013). The production of a corrosion resistant graphene reinforced composite coating on copper by electrophoretic deposition. Carbon 61, 47–56. DOI: 10.1016/j.carbon.2013.04.063.10.1016/j.carbon.2013.04.063Open DOISearch in Google Scholar

19. Kaiyue, Li., Guoding Chen, Deng Liu. (2016). Study of the influence of lubrication parameters on gear lubrication properties and efficiency. Ind. Lubr. Tribol. 68(6). 647–657. https://doi.org/10.1108/ILT-06-2015-008910.1108/ILT-06-2015-0089Open DOISearch in Google Scholar

20. Chang, S.C., Rihana, A., Bahrman, S., Gruden, C.L., Khijniak, A.I., Skerlos, S.J. & Adriaens, P. (2004). Flow cytometric detection and quantification of mycobacteria in metalworking fluids. Inter. Biodeterioration & Biodegradation 54(2–3), 105–112. http://doi.org/10.1016/j.ibiod.2004.03.01910.1016/j.ibiod.2004.03.019Open DOISearch in Google Scholar

21. Hernández Gayosso, M.J. Nava, N. & Zavala, G. Olivares. (2016). Characterisation and comparison of corrosion products originated in steel pipelines transporting sour gas and crude oil. Inter. J. Corr. Process. Corr. Control 51(8), 626–634. http://dx.doi.org/10.1080/1478422X.2016.1173421.10.1080/1478422X.2016.1173421Search in Google Scholar

22. Bhanudas Dattatraya Bachchhav, Geeta, S. Lathkar. Harijan Bagchi. (2014). Tribology of drawing lubricants for low carbon steel. Ind. Lubr. Tribol. 66(6), 640–644. https://doi.org/10.1108/ILT-10-2012-0105.10.1108/ILT-10-2012-0105Open DOISearch in Google Scholar

23. Nasirov, F.A. (1983). Issledovaniye i razrabotca prochessa polucheniya nizcomolekulyar-noqo polibutadiyena v prisutstvii cataliticheskix sistem na osnove orqanichescix ditioproizvodnix nicelya (cobalta). Diss... cand.xim.nauk.. Baku. IPP ANAS 202 p.Search in Google Scholar

24. ASTM C 613-14: ‘Standard test method for constituent content of composite prepreg by Soxhlet Extraction’.Search in Google Scholar

25. van de Voort, F.R., Sedman, J. & Pinchuk, D. (2011). An overview of progress and new developments in FTIR lubricant condition monitoring methodology. J. ASTM Int. 8(5). ID: JAI103344Google Scholar.Search in Google Scholar

26. Zimmerman, J.B., Hayes, K.F. & Skerlos, S.J. (2004). Influence of Ion Accumulation on the Emulsion Stability and Performance of Semi-Synthetic Metalworking Fluids. Enviromen. Sci. Technol, 38(8), 2482–2490. http://doi.org/10.1021/es034047710.1021/es034047715116857Search in Google Scholar

27. Li Ming Chu, Jaw-Ren Lin, Yuh-Ping Chang. & Chung-Chun Wu. (2016). Elastohydrodynamic lubrication of circular contacts at pure squeeze motion with micropolar lubricants. Ind. Lubr. Tribol. 68(6) pp. 640–646. https://doi.org/10.1108/ILT-10-2015-0139.10.1108/ILT-10-2015-0139Open DOISearch in Google Scholar