Numerical investigation of a novel burner to combust anode exhaust gases of SOFC stacks

1. Zhang, X., Chan, S.H., Li, G., Ho, H.K., Li, J. & Feng, Z. (2010). A review of integration strategies for solid oxide fuel cells, J. of Power Sources, 195, 685–702. DOI: 10.1016/j.jpowsour.2009.07.045.10.1016/j.jpowsour.2009.07.045Open DOISearch in Google Scholar

2. Chan, S.H., Low, C.F. & Ding, O.L. (2002). Energy and exergy analysis of simple solid oxide fuel cell power systems, J. of Power Sources, 103, 188–200. DOI: S0378-7753(01)00842-4.10.1016/S0378-7753(01)00842-4Search in Google Scholar

3. Fontell, E., Jussila, M., Hansen, J.B., Palsson, J., Kivisaari, T. & Nielsen, J.U. (2005). Wartsila-Haldor Topsoe, SOFC test system, abstract presented in SOFC-I, Quebec, Canada, 15–20 May 2005.10.1149/MA2005-01/30/1038Search in Google Scholar

4. Hong, W.T., Yen, T.H., Huang, Ch.N., Tan, H.I. & Chao, Y. (2013). Design and development of major balance of plant components in solid oxide fuel cell system, International J. of Energy and Environment, 4 (1), 73–84. ISSN 2076-2895.Search in Google Scholar

5. Yen, T.H., Hong, W.T., Huang, W.P., Tsai, Y.Ch., Wang, H.Y., Huang, Ch.N. & Lee, Ch.H. (2010). Experimental investigation of 1 kW solid oxide fuel cell system with a natural gas reformer and an exhaust gas burner, J. of Power Sources, 195, 1454–1462. DOI: 10.1016/j.jpowsour.2009.09.021.10.1016/j.jpowsour.2009.09.021Open DOISearch in Google Scholar

6. Yu, S., Hong, D., Lee, Y., Lee, S. & Ahn, K. (2010). Development of a catalytic combustor for a stationary fuel cell power generation system, Renewable Energy, 35, 1083–1090. DOI: 10.1016/j.renenen.2009.10.015.10.1016/j.renenen.2009.10.015Open DOISearch in Google Scholar

7. Zadghaffari, R., Moghaddas, J.S. & Rahimiahar, R. (2012). Numerical investigation of a burner configuration to minimize pollutant emissions, APCBEE Procedia, 3, 177–181. DOI: 10.1016/j.apcbee.2012.06.066.10.1016/j.apcbee.2012.06.066Open DOISearch in Google Scholar

8. Frenzel, I., Loukou, A. & Trimis, D. (2011). An innovative burner concept for the conversion of anode off gas from high temperature fuel cell systems, 11^th Conference on Energy for a Clean Environment, 5–8 July 2011, 1–13.Search in Google Scholar

9. Reis, L.C.B.S., Carvalho, J.A., Nascimento, M.A.R., Rodrigues, L.O., Dias, F.L.G. & Sobrinho, P.M. (2014). Numerical modeling of flow through an industrial orifice, Applied Thermal Engineering, 67, 201–213. DOI: 10.1016/j.applthermaleng.2014.02.036.10.1016/j.applthermaleng.2014.02.036Open DOISearch in Google Scholar

10. Fu, J., Tang, Y., Li, L., Ma, Y., Chen, W. & Li, H. (2016). Four kinds of the two-equation turbulence model’s research on flow field simulation performance of DPF’s porous media and swirl type regeneration burner, Applied Thermal Engineering, 93, 397–404. DOI: 10.1016/j.applthermaleng.2015.09.116.10.1016/j.applthermaleng.2015.09.116Search in Google Scholar

11. Internal report from sunfire – technical coordinator of the STAGE-SOFC project, 2015.Search in Google Scholar