Experience with application of reagent to heat transfer surfaces of combustion device

1. Jiang, D., Xu, H., Khan, H.I., Deng, B. & Zhang, N. (2017). Transport of corrosion products in the steam-water cycle of supercritical power plant. Therm. Engineer. 113, 1164–1169. DOI: 10.1016/j.applthermaleng.2016.11.119.10.1016/j.applthermaleng.2016.11.119Search in Google Scholar

2. Bilitewski, B., Härdtle, G. & Marek, K. (1994). Waste Management. Berlin Heidelberg, Germany: Springer-Verlag. ISBN: 3-540-59210-5.Search in Google Scholar

3. Obroučka, K. (2003). Thermal waste treatment and energy recovery. 1st edition. Ostrava: VSB-Technical University of Ostrava. ISBN 80-248-0009-8.Search in Google Scholar

4. Leskens, M., van Kessel, L.B.M. & Bosgra, O.H. (2005). Model predictive control as a tool for improving the process operation of MSW combustion plants. Waste Managem. 25, 8, 788–798. DOI: 10.1016/j.wasman.2005.03.005.10.1016/j.wasman.2005.03.00515896951Search in Google Scholar

5. Kuriger, R., Young, D., Mackenzie, M., Sarv, H. & Trembly, J. (2017). Phase analysis of scale deposition in boiler tubes utilizing steam-assisted gravity drainage produced water. J. Therm. Sci. Engineer. Appl. 9 (1), 011009. DOI: 10.1115/1.4034598.10.1115/1.4034598Search in Google Scholar

6. Raman, B., Hall, D.M., Shulder, S.J., Caravaggio, M.F. & Lvov, S.N. (2016). An experimental study of deposition of suspended magnetite in high temperature-high pressure boiler type environments. Coll.Surf. A: Physicochemical and Engineering Aspects. 508, 48–56. DOI: 10.1016/j.colsurfa.2016.08.018.10.1016/j.colsurfa.2016.08.018Search in Google Scholar

7. Gao, Z., Zhao, H., Fan, J., Yin, L. & Liao, Y. (2016). Study on structure optimization and heat-transfer characteristics of high-tennperature convective heating surface in pressurized oxy-fuel boilers. J. Chinese Soc. Power Engineer. 36(10), 773–780. ISSN: 16747607.Search in Google Scholar

8. Li, J., Zhai, Z., Wang, J. & Huang, S. (2016). On-line fouling monitoring model of condenser in coal-fired power plants. Therm. Engineer. 104, 628–635. DOI: 10.1016/j.applthermaleng.2016.04.131.10.1016/j.applthermaleng.2016.04.131Search in Google Scholar

9. Jalalirad, M.R., Abd-Elhady, M.S. & Malayeri, M.R. (2013). Cleaning action of spherical projectiles in tubular heat exchangers International. J. Heat Mass Trans. 57, (2), 491–499. DOI: 10.1016/j.ijheatmasstransfer.2012.10.071.10.1016/j.ijheatmasstransfer.2012.10.071Search in Google Scholar

10. Garba, M.U., Ingham, D.B., Ma, L., Degereji, M.U., Pourkashanian, M. & Wiliams, A. (2013). Modelling of deposit formation and sintering for the co-combustion of coal with biomass. Fuel 113(11), 863–872. DOI: 10.1016/j.fuel.2012.12.065.10.1016/j.fuel.2012.12.065Search in Google Scholar

11. Decree of the Czech Ministry of the Environment No 415/2012 Coll., on permissible level of pollution and the discovery and implementation of certain other provisions of the Clean Air Act (emission regulation).Search in Google Scholar

12. Li, J., Wang, P. & Cheng, L. (2016). Characteristics of ash deposition on a novel heat transfer surface. Huag. Xue./CIESC J. 67(9), 3598–3606. DOI: 10.11949/j.issn.0438-1157.20160232.Search in Google Scholar

13. Iannacone, M.M., Castle, J.W. & Rodgers, Jr., J.H. (2009). Characterization of flue gas desulfurization particulates in equalization basins. Fuel 88(9), 1580–1587. DOI: 10.1016/j.fuel.2009.02.035.10.1016/j.fuel.2009.02.035Search in Google Scholar

14. Bigham, J.M., Kost, D.A., Stehouwer, R.C., Beeghly, J.H., Fowler, R., Traina, S.J., Wolfe, W.E. & Dick, W.A. (2005). Mineralogical and engineering characteristics of dry flue gas desulfurization products. Fuel 84(14–15), 1839–1848. DOI: 10.1016/j.fuel.2005.03.018.10.1016/j.fuel.2005.03.018Search in Google Scholar

15. Zacco, A., Borgese, L., Gianoncelli, A., Depero, L.E. & Bontempi, E. (2014). Review of fly ash inertisation treatments and recycling. Environ. Chem. Lett. 12(1), 153–175. DOI: 10.1007/s10311-014-0454-6.10.1007/s10311-014-0454-6Search in Google Scholar

16. Fry, A., Adams, B., Davis, K., Swensen, D. & Cox, W. (2012). Fire-side corrosion of heat transfer surface materials with air- and oxy-coal combustion. In Air and Waste Management Association – Power Plant Air Pollutant Control “MEGA” Symposium 2012, Baltimore, MD, USA; 20–23^rd August 2012.Search in Google Scholar

17. Alba, N., Gassó, S., Lacorte, T. & Baldasano, J.M. (1997). Characterization of Municipal Solid Waste incineration residues from facilities with different air pollution control systems. J. Air Waste Managem. Assoc. 47(11), 1170–1179. ISSN: 10962247.10.1080/10473289.1997.10464059Search in Google Scholar

18. Van Kessel, L.B.M., Leskens, M. & Brem, G. (2002). Calorific value sensor and validation of dynamic models applied to municipal solid waste combustion. IChemE The Chemical Engineer. 80 B5, 245–255. DOI: 10.1205/095758202762277605.10.1205/095758202762277605Search in Google Scholar

19. Breeding, Ch., Tandra, D. & Shah, S. (2010). Boiler Cleaning Using ISB (Intelligent Soot Blowing) System Integration. In ASME 2010 Power Conference, Chicago, USA, 13–15^th July 2010.Search in Google Scholar

20. A.I.T. Drivex. (2003). Contre l’encrassement des chaudieres, Revue du Papier Carton, Issue 65, October 2003 (pp. 46–48).Search in Google Scholar

21. A.I.T. DRIVEX. Available on the website: <http://www.drivex.fr/Catalogue.htm>Search in Google Scholar