The Application of Vibration Accelerations in the Assessment of Average Friction Coefficient of a Railway Brake Disc

[1] Aranganathan, N., Bijwe, J. (2016). Development of copper-free eco-friendly brake-friction material using novel ingredients. Wear, 352-353, 79-91.10.1016/j.wear.2016.01.023Search in Google Scholar

[2] Belhocine, A., Bouchetara, M. (2012). Thermomechanical modelling of dry contacts in automotive disc brake. International Journal of Thermal Sciences, 60, 161-170.10.1016/j.ijthermalsci.2012.05.006Search in Google Scholar

[3] Chen, J., Randall, R.B., Peeters, B. (2016). Advanced diagnostic system for piston slap faults in IC engines, based on the non-stationary characteristics of the vibration signal. Mechanical System and Signal Processing, 75, 434-454.10.1016/j.ymssp.2015.12.023Search in Google Scholar

[4] Collignon, M., Regheere, G., Cristol, A.L., Desplanques, Y., Balloy, D. (2013). Braking performance and influence of microstructure of advanced cast irons for heavy goods vehicle brake discs. Journal of Engineering Tribology, 227 (8), 930-940.10.1177/1350650113484212Search in Google Scholar

[5] Crăciun, A. (2015). Evolution of materials for motor vehicles brake discs. ANNALS of Faculty Engineering Hunedoara - International Jurnal of Engineering, 13 (3), 149-154.Search in Google Scholar

[6] Dubarry, M., Svoboda, V., Hwu, R., Liaw, B.Y. (2007). Capacity and power fading mechanism identification from a commercial cell evaluation. Journal of Power Sources, 165, 566-572.10.1016/j.jpowsour.2006.10.046Search in Google Scholar

[7] Fazio, O., Nacivet, S., Sinou, J. (2015). Reduction strategy for a brake system with local frictional nonlinearities – Application for the prediction of unstable vibration modes. Applied Acoustics, 91, 12-24.10.1016/j.apacoust.2014.11.005Search in Google Scholar

[8] Fidlin, A., Bäuerle, S., Boy, F. (2015). Modelling of the gas induced fading of organic linings in dry clutches. Tribology International, 92, 559-566.10.1016/j.triboint.2015.08.003Search in Google Scholar

[9] Gill, A., Kadziński, A. (2015). The determination procedure of the onset of the object wear-out period based on monitoring of the empirical failure intensity function. Eksploatacja i Niezawodność – Maintenance and Reliability, 17 (2), 282–287.10.17531/ein.2015.2.16Search in Google Scholar

[10] Glowacz, A. (2016). Fault diagnostics of acoustic signals of loaded synchronous motor using SMOFS-25-EXPANDED and selected classifiers. Tehnicki Vjesnik-Technical Gazette, 23 (5), 1365-1372.Search in Google Scholar

[11] Glowacz, A., Glowacz, Z. (2017). Diagnosis of stator faults of the single-phase induction motor using acoustic signals. Applied Acoustics, 117 (A), 20-27.10.1016/j.apacoust.2016.10.012Search in Google Scholar

[12] Glowacz, A. (2016). Fault diagnostics of DC motor using acoustic signals and MSAF-RATIO30-EXPANDED. Archives of Electrical Engineering, 65 (4), 733-744.10.1515/aee-2016-0051Search in Google Scholar

[13] Gryboś, R. (2009). Machine Vibrations. Gliwice, Poland: Publishing House of Silesia University of Technology, 214.Search in Google Scholar

[14] Grzes, P., Oliferuk, W., Adamowicz, A., Kochanowski, K., Wasilewski, P., Yevtushenko, A.A. (2016). The numerical-experimental scheme for the analysis of temperature field in a pad-disc braking system of a railway vehicle at single braking. International Communications in Heat and Mass Transfer, 75, 1-6.10.1016/j.icheatmasstransfer.2016.03.017Search in Google Scholar

[15] Hoguet, T. (2007). Brake tests at Bosch. Brüel & Kjær Magazine, 2, 22-24.Search in Google Scholar

[16] Kasem, H., Brunel, J.F., Dufrénoy, P., Siroux, M., Desmet, B. (2011). Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking. Wear, 270, 355-364.10.1016/j.wear.2010.11.007Search in Google Scholar

[17] Kodeks UIC 541–3. Hdisc brake and its application. Conditions of brake pad permission for use. 7^th edition, June 2010, 10-24.Search in Google Scholar

[18] Kruse, S., Tiedemann, M., Zeumer, B., Reuss, P., Hetzler, H., Hoffmann, N. (2015). The influence of joints of friction induced vibration in brake squeal. Journal of Sound and Vibration, 340, 239-252.10.1016/j.jsv.2014.11.016Search in Google Scholar

[19] Kumar, M., Boidin, X., Desplanques, Y., Bijwe, J. (2011). Influence of various metallic fillers in friction materials on hot-spot appearance during stop braking. Wear, 270, 371-381.10.1016/j.wear.2010.11.009Search in Google Scholar

[20] Leszek, W. (2006). Selected methodological issues of empirical research. Institute of Maintenance Technology, Radom, Poland, 142-153.Search in Google Scholar

[21] Mańczak, K. (1976). Techniques of Experiment Planning. Warsaw, Poland: WNT, 76-84.Search in Google Scholar

[22] Neis, P.D., Ferreira, N.F., Lorini, F.J. (2011). Contribution to perform high temperature tests (fading) on a laboratory-scale tribometer. Wear, 271, 2660-2664.10.1016/j.wear.2010.12.023Search in Google Scholar

[23] Paczkowska, M. (2016). The evaluation of the influence of laser treatment parameters on the type of thermal effects in the surface layer microstructure of gray irons. Optics and Laser Technology, 76, 143-148.10.1016/j.optlastec.2015.07.016Search in Google Scholar

[24] Panier, S., Dufrénoy, P., Weichert, D. (2004). An experimental investigation of hot spots in railway disc brakes. Wear, 256, 764-773.10.1016/S0043-1648(03)00459-9Search in Google Scholar

[25] Peveca, M., Oder, G., Potrč, I., Šraml, M. (2014). Elevated temperature low cycle fatigue of grey cast iron used for automotive brake discs. Engineering Failure Analysis, 42, 221-230.10.1016/j.engfailanal.2014.03.021Search in Google Scholar

[26] Polish Committee for Standardization. (2016). Railway – brake discs of rail vehicles – Part 3: Brake discs, properties of a disc brake and the friction pair, classification. PN-EN 14535-3, 12-16.Search in Google Scholar

[27] Rudolph, M., Popp, K. (2001). Brake squeal. In Detection, Utilization and Avoidance of Nonlinear Dynamical Effects in Engineering Applications: Final Report of a Joint Research Project Sponsored by the German Federal Ministry of Education and Research. Shaker Verlag, 197–225.Search in Google Scholar

[28] Sawczuk, W. (2016). Application of vibroacoustic diagnostics in the evaluation of wear of friction pads in a railway disc brake. Maintenance and Reliability, 18 (4), 565–571.10.17531/ein.2016.4.11Search in Google Scholar

[29] Sawczuk, W. (2015). Application of selected frequency characteristics of vibration signal for the evaluation of the braking process for railway disc brake. Diagnostyka - Applied Structural Health, Usage and Condition Monitoring, 16 (3), 33-38.Search in Google Scholar

[30] Sawczuk, W., Szymanski, G.M. (2016). Diagnostics of the railway friction disc brake based on the analysis of the vibration signals in terms of resonant frequency. Archive of Applied Mechanics, 86, 1-15.Search in Google Scholar

[31] Segal, L. (1999). Diagnostic method for vehicle brake. NDT&E International, 32, 369-373.10.1016/S0963-8695(99)00006-7Search in Google Scholar

[32] Szymanski, G.M., Josko, M., Tomaszewski, F., Filipiak, R. (2015). Application of time-frequency analysis to the evaluation of the condition of car suspension. Mechanical System and Signal Processing, 58-59, 298-308.10.1016/j.ymssp.2014.12.017Search in Google Scholar

[33] Szymanski, G.M., Josko, M., Tomaszewski, F. (2016). Diagnostics of automatic compensators of valve clearance in combustion engine with the use of vibration signal. Mechanical System and Signal Processing, 68-69, 479-490.10.1016/j.ymssp.2015.07.015Search in Google Scholar

[34] Ścieszka, S.F. (1998). Friction Brakes. Material, Design and Tribological Issues. Publishing House Gliwice-Radom, Poland, 106-110.Search in Google Scholar

[35] Triches, M., Samir, N.Y., Jordan, R. (2008). Analysis of brake squeal noise using finite element method. A parametric study. Applied Acoustics, 69, 147-162.10.1016/j.apacoust.2007.10.003Search in Google Scholar

[36] Wirth, X. (1998). Improving the performance of disc brakes on high-speed rail vehicles with a novel types of brake pad: Isobar. RTR, 1, 24-29.Search in Google Scholar

[37] Żółtowski, B., Lukasiewicz, M. (2012). Vibration Diagnostics of Machines. WNT Radom, Poland, 113-115.Search in Google Scholar