Effect of Temperature of Heat Treatment on Energetic Intensity of Flat Milling of Picea Abies

[1] Š. Barcík and T. Homola. “Effect of selected parameters on the quality of machined surface at planar milling of juvenile pine wood”, in Proceedings of the Chip and Chipless Woodworking, 2004, pp. 31-36.Search in Google Scholar

[2] Š. Barcík and T. Rehák. Effect of selected technical, technological and material factors on the energetic efficiency at planar milling. Prague: Czech University of Life Sciences, 2009.Search in Google Scholar

[3] C. Bengtsoon, J. Jermer, A. Clang and B. Ek-Olausson. “Investigation of some Technical Properties of Heattreated Wood”. Brisbane: International Research Group on Wood Protection, 2003.Search in Google Scholar

[4] M.J. Boonstra, J. van Acker and A. Pizzi. “Anatomical and molecular reasons for property changes of wood after full-scale industrial heat-treatment”, in Proceedings of the Third European Conference on Wood Modification, 2007, pp. 343-358.Search in Google Scholar

[5] J. Černecký, J. Jandačka, M. Malcho, J. Koniar and Z. Brodnianská. “Effect of the positions of directional tubing towards shaped heating surfaces on the value of local heat transfer coefficients”. JP Journal of Heat and Mass Transfer, vol. 12, no. 1, pp. 15-30, 2015.10.17654/JPHMTAug2015_015_030Search in Google Scholar

[6] J. Lisičan. Theory and technique of wood working. Zvolen: MAT-CENTRUM, 2007.Search in Google Scholar

[7] P. Koleda and M. Hrčková. “Global and Local Thresholding Techniques for Sawdust Analysis.” Acta Facultatis Technicae, vol. 23, no. 1, pp. 33-42, 2018.Search in Google Scholar

[8] P. Koleda, Š. Barcík, M. Vančo and A. Nociarová. “Thermal Treatment and Its Effect on Energetic Efficiency of Thermal Treated Oak Wood Face Milling”. Acta Facultatis Technicae, vol. 22, no. 2, pp. 63-74, 2017.Search in Google Scholar

[9] J. Krilek, J. Kováč and M. Kučera. “Wood cross cutting process analysis for circular saws”, BioResources, vol. 9, no. 1, pp. 1417-1429, 2014.Search in Google Scholar

[10] J. Kubš. “Influence of Selected Factors on the Energy Performance of Flat Milling of Thermally Modified Wood”. M.A. thesis, Czech University of Life Sciences, Prague, Czech Republic, 2013.Search in Google Scholar

[11] J. Kubš, M. Gaff and Š. Barcík. “Factors affecting the consumption of energy during the milling of thermally modified and unmodified beech wood”. BioResources, vol. 11, no. 1, pp. 736-747, 201610.15376/biores.11.1.736-747Search in Google Scholar

[12] Mazáň, M. Vančo and Š. Barcík. “Influence of technological parameters on tool durability during machining of juvenile wood”. BioResources, vol. 12, no. 2, pp. 2367-2378, 2017.Search in Google Scholar

[13] E. Miftieva. “Influence of Technical – technological and Material Factors of Planar Milling of Thermally Modified Birch Wood on Energy Performance during Shaping”. M.A. thesis, Czech University of Life Sciences, Prague, Czech Republic, 2014.Search in Google Scholar

[14] P. Niemz, T. Hoffmann and T. Retfalvi. “Investigation of chemical changes in the structure of thermally modified wood”. Maderas Ciencia y Tecnologia, vol. 12, no. 2, pp. 69-78, 2010.10.4067/S0718-221X2010000200002Search in Google Scholar

[15] Nociarová. “Effect of technical and technological independent parameters on energetic consumption when planar milling of heat-treated oak wood”. M.A. thesis, Technical University in Zvolen, Slovakia, 2017.Search in Google Scholar

[16] E.L. Olteanu, C.F. Bîşu and I. Tănese. “Determination of power consumption in Milling”. U.P.B. Scientific Bulletin, vol. 75, no. 4, pp. 211-220, 2013.Search in Google Scholar

[17] E. Pivarčiová. “Analysis of concentration fields holograms”, in Informatics and Automation in Process Control, Zvolen, 2012.Search in Google Scholar

[18] S. Prokeš. Working of Wood and New Wood Materials. Prague: SNZL, 1982.Search in Google Scholar

[19] L. Reinprecht and Z. Vidholdová. Thermowood – Preparation, Characteristics and Applications. Zvolen: Technical University in Zvolen, 2008.Search in Google Scholar

[20] S. Thiede, G. Bogdanski and C. Herrmann. “A systematic method for increasing the energy and resource efficiency in manufacturing companies”, in 1st CIRP Global Web Conference: Interdisciplinary Research in Production Engineering, no. 2, 2012, pp. 18-33.10.1016/j.procir.2012.05.034Search in Google Scholar

[21] M. Vančo, Z. Jamberová, Š. Barcík, M. Gaff, H. Čekovská and L. Kaplan. “The effect of selected technical, technological, and material factors on the size of juvenile poplar wood chips generated during face milling”. BioResources, vol. 12, no. 3, pp. 4881-4896, 2017.Search in Google Scholar

[22] M. Vančo, A. Mazáň, Š. Barcík, L. Rajko, P. Koleda, Z. Vyhnáliková and R.R. Safin. “Impact of selected technological, technical and material factors on the quality of machined surface at face milling of thermally modified pine wood”. BioResources, vol. 12, no. 3, pp. 5140-5154, 2017.Search in Google Scholar

[23] J. Wilkowski, M. Grześkiewicz, P. Czarniak, I. Siwek, L. Javorek and D. Pauliny. “Influence of thermal modification of oak wood on cutting forces during milling”. Annals of Warsaw University of Life Sciences – SGGW Forestry and Wood Technology, vol. 76, pp. 203-207, 2011.Search in Google Scholar

[24] B.J. Zobel and J.R. Sprague. Juvenile Wood in Forest Trees. Berlin: Springer-Verlag, 1998.10.1007/978-3-642-72126-7Search in Google Scholar