Tribological characteristics of dental metal biomaterials

1. Chladek W. (2008). Biomechanika inżynierska narządu żucia. Zagadnienia wybrane. Gliwice: Wyd. Pol. Śl.; p. 169.Search in Google Scholar

2. Faria A.C.L. et al.: Wear resistance of experimental titanium alloys for dental applications. J. Mech. Behav. Biomed. Mater., 4, 1873, 2011.Search in Google Scholar

3. Iijima D. et al.: Wear properties of Ti and Ti-6Al-7Nb castings for dental prostheses. Biomaterials, 24, 1519, 2003.10.1016/S0142-9612(02)00533-1Search in Google Scholar

4. Jałbrzykowski M. et al.: Aspects of exploitation stability of selected dental prosthetic bridges. Acta Mech. Autom., 5, 54, 2011.Search in Google Scholar

5. Li-Juan X. et al.: Microstructure and dry wear properties of Ti-Nb alloys for dental prostheses. Trans. Nonferrous Met. Soc. China, 19, 639, 2009.10.1016/S1003-6326(10)60124-0Search in Google Scholar

6. Lin H.-Y. et al.: Metallurgical, surface, and corrosion analysis of Ni-Cr dental casting alloys before and after porcelain firing. Dent. Mater., 24, 378, 2008.Search in Google Scholar

7. Long M., Rack H.J.: Friction and surface behavior of selected titanium alloys during reciprocating-sliding motion. Wear, 249, 158, 2001.Search in Google Scholar

8. Milewski G. (2002). Wytrzymałościowe aspekty interakcji biomechanicznej tkanka twarda – implant w stomatologii. Kraków: Zeszyty Naukowe Politechniki Krakowskiej, seria Mechanika; p. 89.Search in Google Scholar

9. Nine M.J. et al.: Wear Debris Characterization and Corresponding Biological Response: Artificial Hip and Knee Joints. Materials, 7, 980 2014.10.3390/ma7020980Search in Google Scholar

10. PN-EN ISO 10271: 2012. Stomatologia – Metody badania korozji materiałów metalowych.Search in Google Scholar

11. Rocha L.A., Oliveira F., Cruz H.V., Sukotjo C., Mathew M.T. (2013). Bio-tribocorrosion in dental applications. Chapter in a book: Yan Y. (editor) Bio-Tribocorrosion in Biomaterials and Medical Implants. Cambridge: Woodhead Publishing Limited; pp. 223-24910.1533/9780857098603.3.223Search in Google Scholar

12. Souza J.C.M. et al.: Simultaneous degradation by corrosion and wear of titanium in artificial saliva containing fluorides. Wear, 292-293, 82, 2012.10.1016/j.wear.2012.05.030Search in Google Scholar

13. Strietzel R.: Ponowne odlewanie stopów dentystycznych. Dent. Labor.,4, 3, 2000.Search in Google Scholar

14. Vieira A.C. et al.: Influence of pH and corrosion inhibitors on the tribocorrosion of titanium in artificial saliva. Wear, 261, 994, 2006.10.1016/j.wear.2006.03.031Search in Google Scholar

15. Walczak M. (2014). Influence of the selected technological processes on durability of metal-ceramic systems used in dental prosthetics. Lublin: Published by Lublin University of Technology; p. 183.Search in Google Scholar

16. Walczak M., Pieniak D., Niewczas A.M.: Effect of recasting on the useful properties CoCrMoW alloy. Eksploatacja i Niezawodność – Maintenance and Reliability, 16, 330, 2014.Search in Google Scholar

17. Walczak M., Różycki Ł.: Analiza naprężeń w twardych tkankach zębów na przykładzie dolnego siekacza z wykorzystaniem metody MES. Postępy Nauki i Techniki, 11, 107, 2011.Search in Google Scholar

18. Wang L. et al.: Friction and wear behaviors of dental ceramics against natural tooth enamel. J. Eur. Ceram., 32, 2599, 2012.10.1016/j.jeurceramsoc.2012.03.021Search in Google Scholar

19. Wataha J.C. et al.: Brushing-induced surface roughness of nickel-, palladium-, and gold-based dental casting alloys. J. Prosthet. Dent.,99, 455, 2008.10.1016/S0022-3913(08)60107-9Search in Google Scholar

20. Żmudzki J. (2012). Uwarunkowania materiałowe wydolności czynnościowej całkowitych osiadających protez zębowych [Online]. Open Access Library: http://www.openaccesslibrary.com/vol10/4.pdf [2016, May 12].Search in Google Scholar