Contribution to Estimating Bearing Capacity of Pile in Clayey Soils

[1] BULKO, R. - DRUSA, M. - VLČEK, J. - MEČÁR, M.: CPT Profiling and Laboratory Data Correlations for Deriving of Selected Geotechnical Parameter. In: Civil and Environmental Engineering, Vol. 11, Issue 2/2015, p. 152 - 157, DOI: 10.1515/cee-2015-0020.10.1515/cee-2015-0020Search in Google Scholar

[2] MAYNE, P. W.: In-Situ Test Calibrations for Evaluating Soil Parameters, Overview Paper, Characterization and Engineering Properties of Natural Soils II (Proceedings of Singapore Workshop). Taylor & Francis Group, London, United Kingdom, 2006.10.1201/NOE0415426916.ch2Search in Google Scholar

[3] LUNNE, T. - ROBERTSON, P. K. - POWELL, J. J. M.: Cone Penetration Testing in Geotechnical Practice. Blackie Academic, EF Spon/Routledge Publishers, New York, N.Y., 1997, 312 p.Search in Google Scholar

[4] BOWLES, J. E.: Foundation Analysis and Design. 5th edition, The McGraw-Hill Companies, Inc. 1997, ISBN 0-07-118844-4.Search in Google Scholar

[5] FELLENIUS, B. H., - ESLAMI, A.: Soil profile interpreted from CPTu data. In: Year 2000 Geotechnics - Geotechnical Engineering Conference, Asian Institute of Technology, Bangkok, Thailand, November 27 - 30, 2000, 18 p.Search in Google Scholar

[6] DRUSA, M. - MORAVČÍK, M.: Foundation Structures. Edis, Žilina, 2008, 118 p., ISBN 978-80-554-0068-6.Search in Google Scholar

[7] DRUSA, M.: Improvement in Evaluation of Neogenous Soils by CPT Testing. In: Proceedings of SGEM 2012, Vol II., p. 151 - 158, ISSN 1314-2704, DOI: 10.5593/sgem2012.10.5593/sgem2012Search in Google Scholar

[8] MAYNE, P. W.: NCHRP SYNTHESIS 368: Cone Penetration Testing: A Synthesis of Highway Practice. Transportation Research Board, Washington, D.C. 2007, ISSN 0547-5570.Search in Google Scholar

[9] DENICOLA, A. - RANDOLPH, M. F.: Tensile and Compressive Shaft Capacity of Piles in Sand. In: Journal of Geotechnical Engineering, Vol. 119, No. 12/1993, p. 1952 - 1973.10.1061/(ASCE)0733-9410(1993)119:12(1952)Search in Google Scholar

[10] KULHAWY, F. H. - MAYNE, P. W.: Manual on Estimating Soil Properties for Foundation Design. Report EPRI EL-6800, Electric Power Research Institute, Palo Alto, California, 1990, 306 p.Search in Google Scholar

[11] MASOPUST J.: Special foundation engineering (in Czech). CERM Brno 2004, ISBN 80-214-2770-1.Search in Google Scholar

[12] http://apl.geology.sk/mapportal/, [access: 04/2016]Search in Google Scholar

[13] POWELL, J. J. M. - LUNNE, T. - FRANK, R.: Semi-Empirical Design for Axial Pile Capacity in Clays. In: Proceedings of 15th International Conference on Soil Mechanics and Geotechnical Engineering, Vol. 2, (Istanbul, Turkey). Balkema, Rotterdam, the Netherlands, 2001, p. 991 - 994.Search in Google Scholar

[14] ROBERTSON, P. K.: Soil Classification Using the Cone Penetration Test. In: Canadian Geotechnical Journal, Vol. 27, No. 1/1990, p. 151 - 158.10.1139/t90-014Search in Google Scholar

[15] MATYS, M. et al.: In-situ testing of soils (in Slovak). Bratislava, ALFA, 1990, 304 p., ISBN 80-05-00647-0.Search in Google Scholar

[16] DRUSA, M. - VLCEK, J.: Numerical approach to pile load test using 3D finite element method. In: Communications - scientific letters of the University of Žilina. Vol. 16, Issue 4/2014 p. 94 - 97, ISSN 1325-4205.10.26552/com.C.2014.4.94-97Search in Google Scholar

[17] VLČEK, J. - ĎUREKOVÁ, D. - ZGÚTOVÁ, K.: Evaluation of dynamic methods for earthwork assessment. In: Civil and Environmental Engineering. Vol. 11, Issue 1/2015, p. 38 - 44, ISSN 1336-5835, DOI: 10.1515/cee-2015-0005.10.1515/cee-2015-0005Search in Google Scholar