Influence of Tool Balancing in High Speed Machining

Borovan, P. (2008) Požadavkynavyváženírotačníchnástrojových system, Technickýtýdeník ,23, p. 27. ISSN : 0040-1064 Search in Google Scholar

Commtest (2005) Basic of Machine Unbalance. Commtest Instruments Ltd. Available at http://commtest.com/support/category:frequently-asked-questions/imbalance-will-not-reduce/ Search in Google Scholar

Dingding, Z.; Ping, C. (2012) Permanent Calibration in High Frequency Ratio (>0.3) Dynamic Unbalance Measurement, Procedia Engineering, 29, p. 4278-4281. ISSN : 1877-7058 Search in Google Scholar

Grim, G.K.; Haidler, J.W.; Mitchell, B.J. (2008)The Basic of Balancing, Balance Technology Inc. Search in Google Scholar

Haimer (2009) Manual Haimer Tool Dynamic Search in Google Scholar

ISO 1940/1 (2003) Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state. Search in Google Scholar

Kováč, M.; Zvončan, M.; Peterka, J. (2011) Influence of tool balancing on machined surface quality in High Speed Machining, Journal of Production Engineering, vol. 15 (1), p. 11-14. ISSN : 1863-7353 Search in Google Scholar

Layne, M.H. (2007) Detecting and Correcting Unbalance in Toolholders for High-Speed Machining, American Hofmann Corporation - Balancing News Letter Search in Google Scholar

McMillan, R.B. (2004) Rotating Machinery - Practical Solutions to Unbalance and Misalignment, The Fairmont Press, Lilburn, ISBN 0-88173-466-7 10.1201/b12415Search in Google Scholar

Moak, N. (2001) Balancing Act ,Cutting Tool Engineering, vol. 53 (10). ISSN : 0011-4189 Search in Google Scholar

SandvikCoromant (2012) Balance of tool holders. Catalogue . Available at http://www2.coromant.sandvik.com/coromant/pdf/metalworking_products_061/tech_g_2.pdfSearch in Google Scholar

Seco (2012) Tooling 2012.Seco Catalogue, p. 19-20 Search in Google Scholar