Morphology Analysis of Friction Particles Generated in Tractor Transmission Oils

AKCHURIN, A. – BOSMAN, R. – LUGT, P. M. – DROGEN, M. 2016. Analysis of wear particles formed in boundary-lubricated sliding contacts. In Tribology Letter, vol. 63, 14 pp.10.1007/s11249-016-0701-zSearch in Google Scholar

BARON, P. – KOČIŠKO, M. – DOBRÁNSKY, J. – POLLÁK, M. – CMOREJ, T. 2015. Research and correlation of diagnostic methods for assessment of the state of oil filling in cycloid gearbox. In Advances in Materials Science and Engineering, vol. 24, pp. 1–9.Search in Google Scholar

DAY, M. J. – RINKINEN, J. 1997. Contaminant monitoring of hydraulic systems – The need for reliable data. In Proceedings of the 10th International Congress of Condition Monitoring and Diagnostic Engineering Management 1, pp. 171–182.Search in Google Scholar

HÖNIG, V. – ORSÁK, M. 2016. Wear of engine oils using gaseous fuel. In Manufacturing Technology, vol. 16, no. 5, pp. 923–927.Search in Google Scholar

KALIN, M. – MAJDIČ, F. – VIŽITIN, J. – PEZDIRNIK, J. – VELKAVRH, I. 2008. Analyses of the long-term performance and tribological behavior of an axial piston pump using diamondlike-carbon-coated piston shoes and biodegradable oil. In Journal of Tribology, vol. 130, no. 1, pp. 011013–011020.Search in Google Scholar

KOSIBA, J. – ČORŇÁK, Š. – GLOS, J. – JABLONICKÝ, J. – VOZÁROVÁ, V. – PETROVIĆ, A. – CSILLAG, J. 2016. Monitoring oil degradation during operating tests. In Agronomy Research, vol. 14, no. 5, pp. 1626–1634.Search in Google Scholar

KOWANDY, C. – RICHARD, C. – CHEN, Y. M. 2008. Characterization of wear particles for comprehension of wear mechanisms. Case of PTFE against cast iron. In Wear, vol. 265, pp. 1714–1719.Search in Google Scholar

KUČERA, M. – ALEŠ, Z. – PEXA, M. 2016. Detection and characterization of wear particles of universal tractor oil using a particles size analyzer. In Agronomy Research, vol. 14, no. 4, pp. 1351–1359.Search in Google Scholar

KUMBÁR, V. – DOSTÁL, P. 2013. Oil additive and its effect. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 61, no. 3, pp. 691–697.Search in Google Scholar

LAGHARI, M. S. 2003. Recognition of texture types of wear particles. In Neutral Computing & Applications, vol. 12, pp. 18–25.Search in Google Scholar

LEVI, O. – ELIAZ, N. 2009. Failure analysis and condition monitoring of an open-loop oil system using ferrography. In Tribology Letter, vol. 36, pp. 17–29.Search in Google Scholar

LIU, H. – WEI, H. – WEI, L. – LI, J. – YANG, Z. 2016. The segmentation of wear particles images using J-segmentation algorithm. In Advances in Tribology, 10 pp.10.1155/2016/4931502Search in Google Scholar

MACHALÍK, S. 2011. Image analysis in tribodiagnostics. In Information Sciences and Technologies Bulletin of the ACM Slovakia, vol. 3, no. 4, pp. 23–27.Search in Google Scholar

MAJDAN, R. – TKÁČ, Z. – STANČÍK, B. – ABRAHÁM, R. – ŠTULAJTER, I. – ŠEVČÍK, P. – RAŠO, M. 2014. Elimination of ecological fluids contamination in agricultural tractors. In Research in Agricultural Engineering, vol. 60, pp. 9–15.Search in Google Scholar

MENDOZA, G. – IGARTUA, A. – FERNANDEZ–DIAZ, B. – URQUIOLA, F. – VIVANCO, S. – ARGUIZONIZ, R. 2011. Vegetable oils as hydraulic fluids for agricultural applications. In Grasas y Aceites, vol. 62, no. 1, pp. 29–38.Search in Google Scholar

MIHALČOVÁ, J. – RIMÁR, M. 2015. Control of activity of aircraft engines by analysis of wear debris particles in terms of shape and size. In International Journal of Engineering Research in Africa, vol. 18, pp. 136–143.Search in Google Scholar

MICHAEL, P. W. – WANKE, T. S. – MCCAMBRIDGE, M. – TUNG, S. – KINKER, B. – WOYDT, M. – DEAN, S. W. 2007. Additive and base oil effects in automatic particle counters. In ASTM International, vol. 4, no. 4.Search in Google Scholar

MÜLLER, M. – LEBEDEV, A. – SVOBODOVÁ, J. – NÁPRSTKOVÁ, N. – LEBEDEV, P. 2014. Abrasive-free ultrasonic finishing of metals. In Manufacturing Technology, vol. 14, no. 3, pp. 366–370.Search in Google Scholar

NG, F. – HARDING, J. A. – GLASS, J. 2017. Improving hydraulic excavator performance through in line hydraulic oil contamination monitoring. In Mechanical Systems and Signal Processing, vol. 83, pp. 176–193.Search in Google Scholar

PAVLŮ, J. – HÖNIG, V. – ALEŠ, Z. – CHOTĚBORSKÝ, R. 2016. Tribodiagnostic analysis of motor oil after failure of turbocharger of combustion engine. In Manufacturing Technology, vol. 16, no. 5, pp. 1115–1122.Search in Google Scholar

PENG, Y. – WU, T. – WANG, S. – KWOK, N. M. – PENG, Z. 2015. Motion-blurred particle image restoration for on-line wear monitoring. In Sensors, vol. 15, no. 4, pp. 8173–8191.Search in Google Scholar

PERIĆ, S. – NEDIĆ, B. – TRIFKOVIĆ, D. – VURUNA, M. 2013. An experimental study of the tribological characteristics of engine and gear transmission oils. In Strojniškivestnik – Journal of Mechanical Engineering, vol. 59, pp. 443–450.Search in Google Scholar

PODSIADLO, P. – STACHOWIAK, G. W. 2012. Directional multiscale analysis and optimization for surface textures. In Tribology Letters, vol. 49, no. 1, pp. 179–191.Search in Google Scholar

PROLIĆ, T. Ć. – FELJA, M. – GRAHOVAC, R. P. – LEPUŠIĆ, A. 2015. Impact of viscosity modifiers on formulation of universal gear tractor oil (UTTO) SAE 10W-30. In Gorivaa i Maziva, vol. 54, no. 3, pp. 257–270.Search in Google Scholar

RAADNUI, S. 2005. Wear particle analysis – utilization of quantitative computer image analysis: A review. In Tribology International, vol. 38, pp. 871–878.10.1016/j.triboint.2005.03.013Open DOISearch in Google Scholar

SEJKOROVÁ, M. – GLOS, J. 2017. Analysis of degradation of motor oils used in Zetor tractors. In Acta Univeritatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 65, no.1, pp. 179–187.Search in Google Scholar

STACHOWIAK, G. P. – STACHOWIAK, G. W. – PODSIADLO, P. 2008. Automated classification of wear particles based on their surface texture and shape features. In Tribology International, vol. 41, pp. 34–43.10.1016/j.triboint.2007.04.004Open DOISearch in Google Scholar

STOJILKOVIĆ, M. – KOLB, M. 2016. Tribological properties of biodegradable universal tractor transmission oil. In Tribology in Industry, vol. 38, no. 2, pp. 229–234.Search in Google Scholar

TKÁČ, Z. – HUJO, Ľ. – TULÍK, J. – KOSIBA, J. – UHRINOVÁ, D. – ŠINSKÝ, V. 2014. Greening of agricultural and forestry tractors. In Acta Universitatis Agriculturae et Silviculturae Mendelianae, vol. 62, no. 5, pp. 1135–1139.Search in Google Scholar

TÓTH, F. – RUSNÁK, J. – KADNÁR, M. – ČAVOJSKÝ, P. 2014. Effect of selected ecological lubricants on the wear of defined sliding bearing. In Acta Technologica Agriculturae, vol. 17, no. 1, pp. 13–16.Search in Google Scholar

TUCKER, J. E. – REINTJES, J. – DUNCAN, M. D. – MCCLELLAND, T. L. – TANKERSLEY, L. L. – SCHULTZ, A. – LU, C. – HOWARD, P. L. – SEBOK, T. HOLLOWAY, C. – FOCKLER, S. 1998. LaserNet Fines optical oil debris monitor. In Joint Oil Analysis Program International Condition Monitoring Conference.10.21236/ADA347454Search in Google Scholar

TULÍK, J. – KOSIBA, J. – STANČÍK, B. – ŠTULAJTER, I. 2014. Pollution analysis of new synthetic biodegradable fluid during durability test of hydrostatic pump. In Acta Technologica Agriculturae, vol. 17, no.1, pp. 24–28.Search in Google Scholar

TULÍK, J. – KOSIBA, J. – VARGA, F. – BUREŠ, Ľ. – ŠINSKÝ, V. 2013. Analysis of synthetic oil samples during an operating test. In Acta Technologica Agriculturae, vol. 16, no.1, pp. 22–25.Search in Google Scholar

VALACH, M. – MAREČEK, J. – HLAVÁČOVÁ, Z. – TRÁVNIČEK, P. – GLOS, J. 2013. Determination of impurities in biofuels with use of particle size analyser. In Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, vol. 61, pp. 813–817.Search in Google Scholar

VÄHÄOJA, P. O. – PIKKARAINEN, H. V. S. 2011. Trends in industrial oil analysis – a review. In International Journal of Condition Monitoring, vol. 1, no. 1, pp. 4–10.Search in Google Scholar

WÄSCHE, R. – HARTELT, M. – HODOROABA, V. 2015. Analysis of nanoscale wear particles from lubricated steel–steel contacts. In Tribology Letters, vol. 58, p. 49.Search in Google Scholar

WU, T. – PENG.Y. – WANG, S. – CHEN, F. – KWOK, N. – PENG, Z. 2016. Morphological feature extraction based on multi-view images for wear debris analysis in on-line oil monitoring. In Tribology Transactions, vol. 59, pp. 1–11.Search in Google Scholar