Plastic Mechanisms for Thin-Walled Cold-Formed Steel Members in Eccentric Compression

1. Davies J.M., Leach P. (1994), First order generalized beam theory, Journal of Construction. Steel research, 39,187-220.10.1016/0143-974X(94)90010-8Search in Google Scholar

2. Dubina D., Ungureanu V. (2002), Plastic strength of thin-walled members, Sixteenth Int. Specialty Conference on Cold-Formed Steel Structures, Orlando, Florida, 324-332.Search in Google Scholar

3. Eurocode 1993-1-3: Eurocode 3: Design of steel structures, Part 1-3: General Rules.Search in Google Scholar

4. Hiriyur B.K.J., Schafer B.W. (2004), Yield-line analysis of cold-formed steel members, International Journal of Steel Structures, 5(1), 43-54.Search in Google Scholar

5. Kato B. (1965), Buckling strength of plates in the plastic range, International Association of Bridge and Structural Engineering, 25,127-141.Search in Google Scholar

6. Korol R.M., Sherbourne A.N. (1972), Strength prediction of plates in uniaxial compression, Journal of Structural Division, 98, 1965-1986.10.1061/JSDEAG.0003327Search in Google Scholar

7. Kotełko M. (2010), Load-carrying capacity and mechanisms of failure of thin-walled structures, (in Polish), WNT Warszawa.Search in Google Scholar

8. Kotełko M., Mania J.R. (2008), Alternative solution of the problem of load-capacity of thin-walled plated structures, Mechanics and Mechanical Eng., 12(4), 323-336.Search in Google Scholar

9. Kragerup J. (1982), Five notes on plate buckling, Technical University of Denmark, Department of Structural Engineering, Series R, Nr 143.Search in Google Scholar

10. Królak M. [ed.] (1990), Post-buckling and load-capacity of thin-walled girders of flat walls (in Polish), PWN Warszawa-Łódź.Search in Google Scholar

11. Mahendran M. (1997), Local plastic mechanisms in thin steel plates under in-plane compression, Thin-Walled Structure, Elsevier Appl. Sci, 27, 245-261.Search in Google Scholar

12. Murray N.W., Khoo P.S. (1981), Some basic plastic mechanisms in thin-walled steel structures, Int. J. Mech. Sci., 23(12), 703-713.10.1016/0020-7403(81)90008-4Search in Google Scholar

13. Rassmussen K.J.R., Hancock G.J. (1991), Nonlinear analyses of thin-walled channel-section columns, Thin-Walled Structures, 13(1,2) 145-176.10.1016/0263-8231(92)90006-ISearch in Google Scholar

14. Rondal J., Maquoi R. (1985), Stub-column strength of thin-walled squre and rectangular hollow sections, Thin-Walled Structures, 3, 15-34.10.1016/0263-8231(85)90017-5Search in Google Scholar

15. Sin K.W. (1985), The collapse behaviour of thin-walled sections, PhD Thesis, Dept. of Mechanical Engineering, University of Strathclyde, Glasgow.Search in Google Scholar

16. Ungureanu D.V. (2006), Light steel structures made of cold-formed steel profiles, (in Romanian), Ed. Orizonturi Universitare Timisoara.Search in Google Scholar

17. Ungureanu V., Dubina D. (2004), Post-elastic strength and ductility of cold-formed steel sections, Proc. of Int. Conference on Thin-Walled Structures, Loughborough, Thin-Walled Structures, 283-294.Search in Google Scholar

18. Ungureanu V., Kotełko M., Mania R.J., Dubina D. (2010), Plastic mechanisms database for thin walled cold-formed steel members in compression and bending, Thin-Walled Structures, 48(10-11) 818-826.10.1016/j.tws.2010.01.004Search in Google Scholar

19. Zhao X.-L. (2003), Yield line mechanism analysis of steel members and connections, Prog. Struct. Engng Mater., 5, 252-262.Search in Google Scholar