<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The knowledge of residual stress distribution is of great importance from the viewpoint of both, industrial and basal research. The most commonly utilized method of residual stress determination is based on strain measurements near the drilled holes of known geometry made by means of tensometric rosettes. An alternative to tensometers way of strain measurement is Digital Image Correlation (DIC). This optical method utilizes digital images registered during observed object deformation and delivers results in the form of displacement field maps consisting of hundreds or thousands of data points. Therefore, it is possible to deliver much more data in comparison to rosettes (only 3 or 6 tensometers, usually) and use them in the inverse method numeric procedure for residual stress calculations. In the paper the experimental stand consisting of micro driller and stereo imaging system for 3D DIC measurement and its application to residual stress estimation in prestrained steel samples are presented followed by obtained results discussion.</p></abstract>

The knowledge of residual stress distribution is of great importance from the viewpoint of both, industrial and basal research. The most commonly utilized method of residual stress determination is based on strain measurements near the drilled holes of known geometry made by means of tensometric rosettes. An alternative to tensometers way of strain measurement is Digital Image Correlation (DIC). This optical method utilizes digital images registered during observed object deformation and delivers results in the form of displacement field maps consisting of hundreds or thousands of data points. Therefore, it is possible to deliver much more data in comparison to rosettes (only 3 or 6 tensometers, usually) and use them in the inverse method numeric procedure for residual stress calculations. In the paper the experimental stand consisting of micro driller and stereo imaging system for 3D DIC measurement and its application to residual stress estimation in prestrained steel samples are presented followed by obtained results discussion.

Application of 3D DIC Displacement Field Measurement in Residual Stress Calculations

Faculty of Materials Science and Engineering

Advances in Materials Science

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The knowledge of residual stress distribution is of great importance from the viewpoint of both, industrial and basal research. The most commonly utilized...

Application of 3D DIC Displacement Field Measurement in Residual Stress Calculations

Published Online: Oct 25, 2017

Page range: 46 - 53

DOI: https://doi.org/10.1515/adms-2017-0015

Keywords
residual stress, Digital Image Correlation (DIC), inverse method

© 2017 T. Brynk, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Application of 3D DIC Displacement Field Measurement in Residual Stress Calculations

Published Online: Oct 25, 2017

Page range: 46 - 53

DOI: https://doi.org/10.1515/adms-2017-0015

Keywordsresidual stress, Digital Image Correlation (DIC), inverse method

© 2017 T. Brynk, published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Keywords
residual stress, Digital Image Correlation (DIC), inverse method