Static And Dynamic Characteristics Of Waste Ceramic Aggregate Fibre Reinforced Concrete

Open access

Abstract

There are multiple obstacles associated both with technology and properties of waste ceramic aggregate concrete preventing its wide production and application. In the research programme these limitations were addressed through utilizing steel fibre reinforcement and the phenomenon of internal curing. After laboratory tests of mechanical properties a numerical analysis of composites in question was conducted.

[1] MALHORTA, V.M. and P.K. MEHTA. High-Performance High-Volume Fly Ash Concrete. Ottawa. SCMSD Inc. 2005. Second revised edition. ISBN 097315070X.

[2] NEVILLE, A.M. Properties of Concrete. Harlow, Essex: Longman, 4th Edition, Addison Wesley Longman, 1995. ISBN 0-582-23070-5.

[3] KATZER, J. and J. KOBAKA. The assessment of fine aggregate pit deposits for concrete production. Kuwait Journal of Science and Engineering. 2006, Kuwait: Kuwait University, vol. 33, pp. 165–174 (10 p). ISBN 2307-4108.

[4] DOMSKI, J., J. KATZER and D. FAJTO. Load-CMOD Characteristics of Fibre Reinforced Cementitious Composites Based on Waste Ceramic Aggregate. Rocznik Ochrona Srodowiska - Annual Set The Environment Protection. Koszalin (Poland): Middle Pomeranian Scientific Society of The Environment Protection, 2012, vol. 14, pp. 69–80 (11 p). ISSN 1506-218X.

[5] HENDRIKS, C.F. and G.M.T. JANSSEN. Use of recycled materials in construction. Materials and Structures. 2003, vol. 36, pp. 604–608 (5 p). ISBN 1359-5997.

[6] DE BRITO, J., A.S. PEREIRA and J.R. CORREIA. Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates. Cement and Concrete Composites. 2005, vol. 27, issue 4, pp. 429–433 (5 p). ISSN 0958-9465.

[7] DOMSKI, J. Cracking moment in steel fibre reinforced concrete beams based on waste sand. Ovidius University Annals - Constantza. Series: Civil Engineering. Constantza, (Romania): Ovidius University Press, 2011, vol. 13, pp. 29–34 (6 p). ISSN 2392-6139.

[8] KATZER, J. Properties of Precast SFRCC Beams Under Harmonic Load. Science and Engineering of Composite Materials. 2008, vol. 15, No.2, pp. 107–120 (14 p). ISSN 2191-0359.

[9] JOHNSTON, C.D. Fibre reinforced cements and concretes. Gordon and Breach Science Publishers, Amsterdam 2001. 364 p.

[10] MAIDL, B.R. Steel fibre reinforced concrete. Berlin: Ernst & Sohn, 1995. ISBN 3433012881.

[11] CORREIA, J.R., J. DE BRITO and A.S. PEREIRA. Effects on concrete durability of using recycled ceramic aggregates. Materials and Structures. 2006, vol. 39, pp. 169–177 (9 p). ISSN 1359-5997.

[12] DOMSKI, J. and J. KATZER. Load-deflection Characteristic of Fibre Concrete Based on Waste Ceramic Aggregate. Rocznik Ochrona Srodowiska - Annual Set The Environment Protection. Koszalin (Poland): Middle Pomeranian Scientific Society of The Environment Protection, 2013, vol. 15, pp. 69–80 (11 p). ISSN 1506-218X.

[13] NAAMAN, A.E. Engineered Steel Fibres with Optimal Properties for Reinforcement of Cement Composites. Journal of Advanced Concrete Technology, 2003, vol. 1, issue 3, pp. 241–252 (12 p). ISBN 1346-8014.

[14] BENTUR, A., S. IGARASHI and K. KOVLER. Prevention of autogenous shrinkage in high strength concrete by internal curing using wet lightweight aggregates. Cement and Concrete Research. 2001, vol. 31, issue 11, pp. 1587–1591 (5 p). ISBN 0008-8846.

[15] COLLINS, F. and J.G. SANJAYAN. (1999) Strength and shrinkage properties of alkali-activated slag concrete containing porous coarse aggregate. Cement and Concrete Research. 1999, vol. 29, issue 4, pp. 607–610 (4 p). ISBN 0008-8846.

[16] KOHNO, K., et al. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete. Cement and Concrete Research. 1999, vol. 29, issue 2, pp 611–614 (4 p). ISBN 0008-8846.

[17] KOVLER, K. and O.M. JENSEN. Novel techniques for concrete curing. Concrete International. 2005, vol. 27, issue 9, pp. 39–42 (4 p). ISBN 0162-4075.

[18] SUZUKI, M. M.S. MEDDAH and R. SATO. Use of porous ceramic waste aggregates for internal curing of high-performance concrete. Cement and Concrete Research. Vol. 39, 373–381 (2009). ISBN 0008-8846.

[19] WEBER, S. and H.W. REINHARDT. A new generation of high performance concrete: concrete with autogenous curing. Advanced Cement Based Material. 1997, vol. 6, issue 2, pp. 59–68 (10 p). ISBN 1065-7355.

[20] ZHUTOVSKY, S., K. KOVLER and A. BENTUR. Influence of wet lightweight aggregate on mechanical properties of concrete at early ages. Materials Structure. 2002, vol. 35, pp. 97–101 (5 p). ISSN 1359-5997.

[21] ZHUTOVSKY, S., K. KOVLER and A. BENTUR. Influence of cement paste matrix properties on the autogenous curing of high-performance concrete. Cement and Concrete Composites. 2004, vol. 26, issue 5, pp. 499–507 (9 p). ISSN 0958-9465.

[22] BELYTSCHKO, T., W. K. LIU and B. MORAN. Nonlinear Finite Elements for Continua and Structures. Edition. John Wiley & Sons, 2000. ISBN 978-0471987734. 650 p.

[23] DASSAULT SYSTÈMES SIMULIA CORP. ABAQUS Analysis User's Manual. Providence, RI, USA, 2014.

[24] PONIKIEWSKI T., J. GOŁASZEWSKI, M. RUDZKI and M. BUGDOL. Determination of steel fibres distribution in self-compacting concrete beams using X-ray computed tomography. Archives of Civil and Mechanical Engineering. Elsevier, 2015, vol. 15, issue 2, pp. 558–568 (11 p). ISSN: 1644-9665.

[25] CICHOCKI, K. Numerical Analysis of Concrete Structures under Blast Load. Koszalin: Wydawnictwo Uczelniane Politechniki Koszalińskiej, 2008. ISSN 0239-7129. 213 p.

[26] DE SOUZA NETO, E.A., D. PERIĆ and D.R.J. OWEN. Computational methods for plasticity. Theory and applications. Edition. John Wiley & Sons, 2008. ISBN 978-0-470-69452-7. 814 p.

[27] CICHOCKI, K., R. ADAMCZYK and M. RUCHWA. Material modelling for structures subjected to impulsive loading. Computer Assisted Mechanics and Engineering Sciences. Poland: Polish Academy of Sciences, 1999, vol. 6, issue 2, pp. 231–244 (14 p). ISSN 2299-3649.

[28] GŁODKOWSKA, W. and M. RUCHWA. Static analysis of reinforced concrete beams strengthened with CFRP composites. Archives of Civil Engineering. 2010, Warsaw (Poland): Committee for Civil Engineering PAS, vol. LVI, issue 2, pp. 111–122 (12 p). ISSN 1 230-2945.

[29] CICHOCKI, K. and M. RUCHWA. Integrity analysis for multistorey buildings. Ovidius University Annals - Constantza. Series: Civil Engineering. Constantza, (Romania): Ovidius University Press, 2013, vol. 15, pp. 45–52 (8 p). ISSN 2392-6139.

[30] SMADI, M.M. and K.A. BELAKHDAR. Nonlinear Finite Element Analysis of High Strength Concrete Slabs. Computers and Concrete, An International Journal. Korea: Techno-Press, 2007, vol. 4 issue 3, pp. 187–206 (20 p). ISSN 1598-818X.

[31] VESELÝ, V. and P. FRANTÍK. Reconstruction of fracture process zone during tensile failure of quasi-brittle materials. Applied and Computational Mechanics. Pilsen (Czech): University of West Bohemia 2011, vol. 4, pp. 237–250 (14 p). ISSN 1802-680X.

[32] TAQIEDDIN, Z.N., G.Z. VOYIADJIS and A.H. ALMASRI. Formulation and Verification of a Concrete Model with Strong Coupling between Isotropic Damage and Elastoplasticity and Comparison to a Weak Coupling Model. Journal of Engineering Mechanics. ASCE, 2012, vol. 138, issue 5, pp. 530–541 (12 p). ISSN 0733-9399.

[33] CICHOCKI, K., J. DOMSKI, J. KATZER and M. RUCHWA. Impact resistant concrete elements with nonconventional reinforcement. Rocznik Ochrona Srodowiska - Annual Set The Environment Protection, Monograph No. 1. Koszalin (Poland): Middle Pomeranian Scientific Society of The Environment Protection, 2014, vol. 16, part 2, pp. 1–99 (99 p). ISSN 1506-218X.

Prof. Ing. Zbyněk Keršner, CSc., Institute of Structural Mechanics, Faculty of Civil Engineering, Brno University of Technology, Czech Republic.

Doc. Ing. Petr Konečný, Ph.D., Department of Structural Mechanics, Faculty of Civil Engineering, VŠB – Technical University of Ostrava, Czech Republic.

Journal Information

Metrics

All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 93 93 8
PDF Downloads 52 52 5