Identification and Analysis of Defect in Forging Tools by Non-Destructive Detection Method

Open access

Abstract

The forging tool has its irreplaceable location across a wide range of industrial production including automotive, aviation and bearing industry. The use of forging tools in serial production has led to a huge increase in consumption of forging tools. By following the productivity and economic benefits of using the tools, the need for rapid and flexible tool renovation is also growing. It is primarily based on the reliable identification and analysis of cracks occurring during operation. This article deals with the application of non-destructive detection technology in assessing the size of the defects of forging that arise in the molding process.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Deutsch V. Platte M.: Crack depth gauging with the potential probe method Castell Publications Wuppertal 2003. ISBN 3-934 255-17-5.

  • [2] Zelený J.: Výroba zápustek a forem. MM průmyslové spektrum SPECIÁL Duben 2001.

  • [3] Derbas M. Czán A.: Renovating intensification of machining nitride layers of tools for volume forming In: TRANSCOM 2011. ISBN 978-80-554-0374-8.

  • [4] Vasilko K. Pilc J.: New technological knowledge of the rotary turning tool Journal of Manufacturing Technology vol. 13 issue 4 2013 pp. 571-575. ISSN 1213-2489.

  • [5] Šajgalík M. Czan A.: Studying of processes in cutting zone by non-destructive methods Technological Engineering vol.8 no.2 2011 ISSN 1336-5967

  • [6] Drbúl M. Šajgalík M. Litvaj I. Babík O.: The influence of selected parameters on evaluation of the geometrical shape deviation - cylindricity in 3D measuring machine workspace. In: Technological engineering Vol. 13 no. 2 (2016) pp. 11-12. ISSN 1336-5967.

  • [7] Czan A. Tillova E. Semcer J. Pilc J.: Surface and subsurface residual stresses after machining and their analysis by x-ray diffraction. In Communications vol. 15 issue 2 2013 pp. 69-76. ISSN 1335-4205.

  • [8] Šajgalík M. Pavlusík T. Pilc J. Mikloš M. Daniš I. Martinček J. Pustay J.: Identification of residual stress in the production of molding tools by turn-milling technology. In Technological engineering. Vol. 14 no. 1 (2017) pp. 14-16. ISSN 1336-5967.

  • [9] Čep R. Janásek A. Čepová L. Petrů J. Hlavatý I. Car Z. Hatala M.: Experimental testing of exchangeable cutting inserts cutting ability. In Tehnicki Vjesnik 20 (1) pp. 21-26. ISSN 1330-3651.

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 58 58 4
PDF Downloads 63 63 2