Temperature Measurements using Thermal Sensitive Paint

Open access


Article highlights practical issues concerning temperature measurements using thermal sensitive paint (abbrev. TSP). TSP paint after blue light excitation emits red light with intensity dependent on its temperature. Temperature measurements are preceded with paint calibration, according to exact experiment conditions. Purpose of calibration is to find transfer function between intensity of emitted radiation and surface temperature. To achieve this goal, special computational procedure is implemented. Devices and methodology used for paint calibration are briefly described as well as measuring sample preparation process. Short description is devoted to the procedure for calculation temperature using recorded intensity. Results obtained during calibration are presented. Final conclusions about perspective of using thermal sensitive paint in laboratory are presented, as well as advantages and disadvantages of TSP method versus other methods currently used in temperature measurements.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Liu T. and Sullivan J.P. 2005 Pressure and Temperature Sensitive Paints Springer New York.

  • [2] Jahanmiri M. 2011 “Pressure Sensitive Paints: The Basics & Applications” 2011:07 Chalmers University of Technology Göteborg Sweden.

  • [3] Bell J.H. 2004 “Applications of Pressure-sensitive Paint to Testing at Very Low Flow Speeds” AIAA-2004-0878.

  • [4] Rosłowicz A. and Bednarczyk P. 2017 “Analysis of Heat Transfer in a Supersonic Rocket Head” Transactions of the Institute of Aviation No. 1 (246) pp.79-94.

  • [5] Fonov S. Crafton J. Goss L. Jones G. Fonov S. and Tyler C. 2005 “Multi-Aspect Solutions for Moving Vehicle Testing” RTO-MP-AVT-124-5 NATO Science and Technology Organisation.

  • [6] Crafton J.W. 2004 “The Impingement of Sonic and Sub-Sonic Jets onto a Flat Plate at Inclined Angles” Ph.D. Thesis Purdue University.

  • [7] Kurits I. and Norris J. D. 2011 “Temperature-Sensitive Paint Calibration Methodology Developed at AEDC Tunnel 9” AIAA 2011-851.

  • [8] Schramm J.M. Hannemann K. Ozawa H. Beck W. and Klein Ch. 2014 “Development of Temperature Sensitive Paints for the High Enthalpy Shock Tunnel Goettingen” 8th European Symposium on Aerothermodynamics for Space Vehicles Lissabon.

  • [9] Stokes N. Patel S. and Hahn M. 2012 “Boundary Layer Transition Detection Using Temperature Sensitive Paint in the ARA Transonic Wind Tunnel” ICAS 2012-3.4.2 28th International Congress of the Aeronautical Sciences Brisbane Australia.

  • [10] Wierciński Z. Kaiser M. Żabski J. 2007 “Extended Reynolds Analogy for Different Flow Conditions of the Heated Plate” Transactions of the Institute of Aviation No. 2 (191) pp. 83-91.

  • [11] Borovoy V. Mosharov V. Noev A. and Radchenko V. 2012 “Temperature Sensitive Paint Application for Investigation of Boundary Layer Transition in Short-Duration Wind Tunnels” Progress in Flight Physics 3 pp. 15-24.

  • [12] Szafran K. Shcherbonos O. and Ejmocki D. 2014 “Effect of duct shape on ducted propeller trust performance” Transactions of the Institute of Aviation No. 4 (237) pp. 85-91.

  • [13] Ruchała P. and Szafran K. 2016 “Praktyczne Aspekty Zastosowania Otunelowanych Śmigieł Pchających” (ang. The Aspects of Practical Application of Ducted Fans) Transactions of the Institute of Aviation No. 3 (244) pp. 257-266.

  • [14] Navarra K. R. 1997 “Development of the Pressure-Sensitive-Paint Technique for Advanced Turbomachinery Applications” Ms.C. thesis Virginia Polytechnic Institute and State University.

  • [15] Liu Q. 1993 “Study of Heat Transfer Characteristics if Impinging Air Jet Using Pressure and Temperature Sensitive Luminescent Paint” Ph.D. thesis Nanjing University of Aeronautics and Astronautics.

  • [16] Zuniga H. A. 2009 “Study of Film Cooling Effectiveness: Conical Trenched and Asymmetrical Shaped Holes” Ph.D. thesis University of Central Florida Orlando.

  • [17] Wright L. M. Gao Z. Varvel T. A. and Han J.-C. “Assessment of Steady State PSP TSP and IR Measurement Techniques for Flat Plate Film Cooling” Heat Transfer: Volume 3 ASME 2005 pp. 37-46.

  • [18] Crafton J. Ladchenko N. Guille M. and Sullivan P. “Application of Temperature and Pressure Sensitive Paint to an Obliquely Impinging Jet” 37th Aerospace Sciences Meeting and Exhibit AIAA-99-0387 Reno USA.

  • [19] Cottingham T. 2015 “Characterization and Optimization of Temperature-Sensitive Microbeads for Simultaneous Thermometry and Velocimetry for Fluid Dynamic Applications” M.Sc. thesis University of Washington.

  • [20] Jeziorek Ł. 2017 “Rozwój Metodologii TSP (Farba Termoczuła) i Potencjału Badań Laboratory-jnych z Nią Związanych” (ang. Development of Thermal Sensitive Paint Methodology and Its Research Capabilities) Sprawozdanie z pracy badawczej nr 2017/PS/01 Institute of Aviation Warsaw.

  • [21] Product catalog 2017 Innovative Scientific Solutions Inc.

Journal information
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 24 24 4
PDF Downloads 7 7 2