Method for Determining Volumetric Efficiency and Its Experimental Validation

Open access

Abstract

Modern means of transport are basically powered by piston internal combustion engines. Increasingly rigorous demands are placed on IC engines in order to minimise the detrimental impact they have on the natural environment. That stimulates the development of research on piston internal combustion engines. The research involves experimental and theoretical investigations carried out using computer technologies. While being filled, the cylinder is considered to be an open thermodynamic system, in which non-stationary processes occur. To make calculations of thermodynamic parameters of the engine operating cycle, based on the comparison of cycles, it is necessary to know the mean constant value of cylinder pressure throughout this process. Because of the character of in-cylinder pressure pattern and difficulties in pressure experimental determination, in the present paper, a novel method for the determination of this quantity was presented. In the new approach, the iteration method was used. In the method developed for determining the volumetric efficiency, the following equations were employed: the law of conservation of the amount of substance, the first law of thermodynamics for open system, dependences for changes in the cylinder volume vs. the crankshaft rotation angle, and the state equation. The results of calculations performed with this method were validated by means of experimental investigations carried out for a selected engine at the engine test bench. A satisfactory congruence of computational and experimental results as regards determining the volumetric efficiency was obtained. The method for determining the volumetric efficiency presented in the paper can be used to investigate the processes taking place in the cylinder of an IC engine.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] A. Urbahs and A. Unbedahts “Acoustic emission method evaluation for high speed ship engines condition monitoring”. – Transport Means 2015 : Proceedings of the 19th International Conference Lietuva Kaunas 22.–23. October 2015. Kaunas: Technologija 2015 pp. 587-590. ISSN 1822-296X. e-ISSN 2351-7034.

  • [2] A. Urbahs A. Unbedahts and J. Fescuks “Ship Diesel Engines Technical Condition Acoustic Diagnostic Results”. Transport Means 2016: Proceedings of the 20th International Conference. Lithuania Kaunas 5–7 October 2016. Kaunas: Kaunas University of Technology 2016 pp. 589–593. ISSN 2351-7034.

  • [3] A. Ambrozik Analysis of Working Cycles in Four-Stroke IC Engines. Kielce University of Technology Kielce 2010.

  • [4] A. Ambrozik Selected Problems in Thermal Processes in Piston Internal Combustion Engines. Kielce University of Technology Kielce 2003.

  • [5] O. A. Özsoysal “Effects of Combustion Efficiency on a Dual Cycle” Energy Conversion and Managemen vol. 50 no. 9 pp. 2400–2406 2009. https://doi.org/10.1016/j.enconman.2009.05.029

  • [6] B. Sahin O. A. Özsoysal and O. S. Söğüt “A Comparative Performance Analysis of Endoreversible Dual Cycle Under Maximum Ecological Function and Maximum Power Conditions” Exergy An International Journal vol. 2 no. 2 pp. 173–185 Jan. 2002. https://doi.org/10.1016/S1164-0235(02)00071-7

  • [7] R. Ebrahimi and M. Sherafati “Thermodynamic Simulation of Performance of a Dual Cycle With Stroke Length and Volumetric Efficiency” Journal of Thermal Analysis and Calorimetry vol. 11 no. 1 pp. 951–957 Apr. 2012. https://doi.org/10.1007/s10973-012-2424-1

  • [8] W. Pulkrabek Willard Engineering Fundamentals of the Internal Combustion Engine. Prentice Hall Upper Saddle River New Jersey 2003.

  • [9] A. K. Oppenheim Combustion in piston engines. Springer Verlag 2004. https://doi.org/10.1007/978-3-662-06297-5

  • [10] A. Irimescu “Study of Volumetric Efficiency for Spark Ignition Engines Using Alternative Fuels” Analele Universităţii “Eftimie Murgu” Reşiţa Anul XVII No. 2 pp. 149–154 2010.

  • [11] K. Niewiarowski Piston combustion engines Vol. 1. Wydawnictwo Komunikacji i Łączności Warszawa 1983.

  • [12] R. Ebrahimi D. Ghanbarian and M. R. Tadayon “Performance of an Otto Engine With Volumetric Efficiency Journal of American Science vol. 6 no. 3 pp. 27–31 2010.

  • [13] G. De Nicolao R. Scattolini and C. Siviero “Modelling the Volumetric Efficiency of IC Engines: Parametric Non-Parametric and Neural Techniques” Control Engineering Practice vol. 4 no. 10 pp. 1405–1415 1996. https://doi.org/10.1016/0967-0661(96)00150-5

  • [14] M. Gumus “Effects of Volumetric Efficiency on the Performance and Emissions Characteristics of a Dual Fuelled (Gasoline and LPG) Spark Ignition Engine” Fuel Processing Technology vol. 92 no. 10 pp. 1862–1867 Oct. 2011. https://doi.org/10.1016/j.fuproc.2011.05.001

  • [15] W. Matzke Timing Gear Design in High-Speed Engines. Wydawnictwo Komunikacji i Łączności Warszawa 1974.

  • [16] J. B. Heywood Internal combustion engine fundamentals. McGraw – Hill Book Company 1988.

  • [17] W. G. Diacenko Exchange of Gases in Internal Combustion Engines (in Russian). Naukowo-Metodyczny Gabinet Ukraińskiej Republiki Socjalistycznej 1989.

  • [18] N. K. Szokotov Fundamentals of Thermodynamic Optimisation in Diesel Engines Used in Transportation (in Russian). Kharkov: Wyższa Szkoła 1980.

  • [19] N. M. Glagolev et al. Train Engines and Gas Turbines. Moscow: Transport Kolejowy 1957.

  • [20] A. F. Szechovtzov et al. Modern Diesel Engines Enhancing Fuel Efficiency and Durability. Kiev: Technika 1992.

  • [21] A. Ambrozik T. Ambrozik D. Kurczyński and P. Łagowski “Assessment of Performance Parameters in Multi-Stage Fuelled 1.3 Multijet Engine” in Proceedings of the Institute of Vehicles vol. 1 no. 82 2011 pp. 187–197.

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 573 284 5
PDF Downloads 1697 1501 224