High-strength flowable mortar reinforced by steel fiber

Open access

High-strength flowable mortar reinforced by steel fiber

An experimental study was conducted on High-Strength Flowable Mortar (HSFM) reinforced at different percentages of steel fiber (0, 0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75 and 2.0% as volumetric fractions) to determine the density, compressive strength, static modulus of elasticity and flexural strength. The load-deflection curves under a static flexural load were established, and the flexural toughness indices were obtained in accordance with ASTM C1018. The results indicate that by increasing the fiber content up to 1.75%, the flexural strength and toughness indices are increased. The density, compressive strength and static modulus of elasticity also increased using steel fiber.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Al-Oraimi S. K. & Seibi A. C.: Mechanical characterization and impact behavior of concrete reinforced with natural fiber. Composite structure 32 1995 pp. 165-171.

  • American Concrete Institute (ACI 211.1-91) Standard P: Standard Practice for Selecting Proportions for Normal Heavyweight and Mass Concret. ACI Manual of Concrete Practice Part 1: Materials and General Properties of Concrete 2000.

  • American Society Tests of Material ASTM C1018: Standard Test Method for Flexural Toughness and First-Crack Strength of Fibre-Reinforced Concrete. Annual book of ASTM Standards Volume 04.02. ASTM International West Conshohocken PA www.astm.org

  • American Society Tests of Material ASTM C469: Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression. Annual book of ASTM 2000 Standards ASTM international West Conshohocken PA www.astm.org

  • Aydin A. C.: Self compactability of high volume hybrid fiber reinforced concrete. Const. & Build. Material; 21 2007 pp. 1149-1154.

  • Balaguru P. N. & Shah S. P.: Fiber Reinforced Cement Composites. 1992 McGraw-Hill Inc. New York.

  • Banthia N. & Sappakittipakorn M.: Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cem. & Conc. Research; 37 2007 pp.1366-1372.

  • Balendran R. V. Zhou F. P. Nadeem A. & Leung A. Y.: Influence of steel fibers on strength and ductility of normal and lightweight high-strength concrete. Building & Environment 37 2007 pp.1361-67.

  • BS 1881: Part 114: Methods for determination of density of hardened concrete. British Standard 1983

  • Burak F. Turkel S. & Altuntas Y.: Effects of steel fiber reinforcement on surface wear resistance on self compacting repair mortar. Cem. & Conc. Comp.; 29 2007 pp.391-396.

  • Domene P. L. & Jine J.: Properties of mortar for self-compacting concrete. Proceedings of the 1st international RILEM symposium on self-compacting concrete 1999 pp. 109-20.

  • EN 1015-6: EUROPEAN STANDARD. EN 1015-6 Determination of bulk density of fresh mortar. 1998

  • EN 1015-11: EUROPEAN STANDARD. EN 1015-11 Methods of test for mortar for masonry: Part 11: Determination of flexure and compressive strength of hardened mortar. 1999.

  • EN 1015-3: EUROPEAN STANDARD. EN 1015-3 Methods of test for mortar for masonry: Part 3: Determination of consistency of fresh mortar (by flow table) 1999.

  • Gang L. Wang K & Rudolphi T. J.: Modeling reheological behavior of highly flowable mortar using concepts of particle and fluid mechanics. Cem. & Conc. Comp.; 30 2008 pp.1-12.

  • Khayat KH Morin R.: Performance of self-consolidating concrete used to repair parapet wall in Montreal. Proceedings of the first North American conference on the design and use of self-consolidating concrete 2002 pp 475-481.

  • Markovic I Walraven J.C & Van M. J.: Self compacting hybrid fiber concrete-mix design workability and mechanical properties. Proceedings of third international symposium on self-compacting concrete 2003 pp.763-775.

  • Mohammadi Y. Singh S. P. & Kaushik S. K.: Properties of steel fibrous concrete containing mixed fibers in fresh and hardened state. Construction & Building Materials 2008 22 pp.956-965.

  • Mustafa S. & Yaman O. I.: Hybrid fiber reinforced self compacting concrete with a high volume coarse fly ash. Construction & Building Materials; 21 2007 pp. 150-156.

  • Nataraja M. C Dhang N. & Gupta A. P.: Stress-strain curves for steel fiber reinforced concrete under compression. Cement & Concrete Composite; 21 1999 pp. 383-390.

  • Neville A.M: Properties of concrete. Fourth and Final edition 1995.

  • Okamura H. & Ouchi M.: Self compacting concrete. J. Adv. Concr Technol 1(1) 2003 pp.1-15.

  • Shah S. P. & Naaman A. E.: Mechanical properties of glass and steel fiber reinforced mortar. ACI Journal; 73(1) 1976 pp.50-53.

  • Steffen G. & Joost C. W.: Parameter study on the influence of steel fibers and coarse aggregate content on the fresh properties of self compacting concrete. Cement & Concrete Research; 31 2001 pp.1793-1798.

  • Zhou F. P. Barr B. I. G. & Lydon F. D.: Fracture mechanical properties of high strength concrete with varying silica fume content and aggregates. Cement & Concrete Research 25(3) 1994 pp. 543-52.

Cited By
Gesamte Zeit Letztes Jahr Letzte 30 Tage
Abstract Views 0 0 0
Full Text Views 276 131 1
PDF Downloads 136 71 0