Evaluation of Terrestrial Laser Scanner Accuracy in the Control of Hydrotechnical Structures

Open access

Abstract

In many cases of monitoring or load testing of hydrotechnical structures, the measurement results obtained from dial gauges may be affected by random or systematic errors resulting from the instability of the reference beam. For example, the measurement of wall displacement or pile settlement may be increased (or decreased) by displacements of the reference beam due to ground movement. The application of surveying methods such as high-precision levelling, motorized tacheometry or even terrestrial laser scanning makes it possible to provide an independent reference measurement free from systematic errors. It is very important in the case of walls and piles embedded in the rivers, where the construction of reference structure is even more difficult than usually. Construction of an independent reference system is also complicated when horizontal testing of sheet piles or diaphragm walls are considered. In this case, any underestimation of the horizontal displacement of an anchored or strutted construction leads to an understated value of the strut’s load. These measurements are even more important during modernization works and repairs of the hydrotechnical structures.

The purpose of this paper is to discuss the possibilities of using modern measurement methods for monitoring of horizontal displacements of an excavation wall. The methods under scrutiny (motorized tacheometry and terrestrial laser scanning) have been compared to classical techniques and described in the context of their practical use on the example hydrotechnical structure. This structure was a temporary cofferdam made from sheet pile wall. The research continuously conducted at Wroclaw University of Science and Technology made it possible to collect and summarize measurement results and practical experience. This paper identifies advantages and disadvantages of both analysed methods and presents a comparison of obtained measurement results of horizontal displacements. In conclusion, some recommendations have been formulated, which are relevant from the point of view of engineering practice.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Baca M. Muszyński Z. Rybak J. Żyrek T. The application of geodetic methods for displacement control in the self-balanced pile capacity testing instrument [in:] Advances and trends in engineering sciences and technologies International Conference on Engineering Sciences and Technologies 27–29 May 2015 CRC Press Tatranská Štrba Slovakia 2015 15–20.

  • [2] Baca M. Rybak J. Żyrek T. Practical aspects of tubular pile axial capacity testing [in:] 15th International Multidisciplinary Scientific Geoconference SGEM 2015 Science and Technologies in Geology Exploration and Mining 18–24 June 2015. Vol. 2. Hydrogeology engineering geology and geotechnics STEF92 Technology Albena Bulgaria 2015 549–554.

  • [3] Bednářová P. Marschalko M. Drusa M. Durďák J. Orininová L. (2015). Importance of Various Types of Stability Assessment of a Hydrotechnical Structure [in:] International Multidisciplinary Scientific Geoconference SGEM 2015 18–24 June 2015 STEF92 Technology Albena Bulgaria 2015 383–390.

  • [4] Gikas V. Paradissis D. Raptakis K. Antonatou O. Deformation Studies of the Dam of Mornos Artificial Lake via Analysis of Geodetic Data [in:] From Pharaohs to Geoinformatics FIG Working Week 16–21 April 2005 Cairo Egypt 1–12. Available: https://www.fig.net/resources/proceedings/fig_proceedings/cairo/papers/ts_43/ts43_02_gikas_etal.pdf

  • [5] Karsznia K. Geodezyjny i geotechniczny monitoring obiektów inżynierskich w ujęciu dynamicznym. Wykrywanie słabych punktów [Electronic version] Nowoczesne Budownictwo Inżynieryjne 2008 4(19) 72–75 (in Polish). Available: http://www.nbi.Com.pl/assets/NBI-pdf/2008/4_19_2008/pdf/23_wykrywanie_slabych_punktow.pdf

  • [6] Kersten T. Sternberg H. Mechelke K. Acevedo Pardo C. Terrestrial Laser Scanning System MENSI GS100/GS200 – Accuracy Tests Experiences and Projects at The Hamburg University of Applied Sciences [in:] Panoramic Photogrammetry Workshop 2004 TU Dresden 2004. Available: http://www.isprs.org/proceedings/XXXIV/5-16/papers/panows_Dresden2004_Kersten.pdf

  • [7] Kowalska M. Zaczek-Peplinska J. Roughness parameters as the elements of surface condition and deformation assessment based on the results of TLS scanning Annals of Warsaw University of Life Sciences-SGGW Land Reclamation 2017 49(1) 29–41. Available: http://ann_landreclam.sggw.pl/z491/art3.pdf

  • [8] Muszyński Z. Application of selected robust estimation methods for calculating vertical displacements of hydrotechnical structures Studia Geotechnica et Mechanica 2010 32(1) 69–80. Available: http://www.sgem.pwr.edu.pl/iss/2010/no1/art05_no1_2010.pdf

  • [9] Muszyński Z. Assessment of suitability of terrestrial laser scanning for determining horizontal displacements of cofferdam during modernization works on the Rędzin sluice [in:] 14th International Multidisciplinary Scientific Geoconference SGEM 2014 Geodesy and Mine Surveying 17–26 June 2014. Vol. 2 STEF92 Technology Albena Bulgaria 81–88.

  • [10] Popielski P. Zaczek-Peplinska J. Bartnik E. Kasprzak A. Smoliński B. Contemporary techniques of data acquisition for preparation of numerical models of hydrotechnical structures Czasopismo Techniczne 2015 2-Ś 113–128 DOI: 10.4467/2353737XCT.15.231.4617

  • [11] Van Cranenbroeck J. State of the Art in Structural Geodetic Monitoring Solutions for Hydro Power Dams [in:] Bridging the Gap between Cultures FIG Working Week 18–22 May 2011 Marrakech Morocco 2011 1–18. Available: https://www.fig.net/resources/proceedings/fig_proceedings/fig2011/papers/ts01e/ts01e_vancranenbroeck_4763.pdf

  • [12] Van Cranenbroeck J. Brown N. Networking Motorized Total Stations and GPS Receivers for Deformation Measurements FIG Working Week 22–27 May 2004 Athens Greece 2015 1–15. Available: https://www.fig.net/resources/proceedings/fig_proceedings/athens/papers/ts16/TS16_2_Cranenbroeck_Brown.pdf

  • [13] Wan Aziz W.A. Zulkarnaini M.A. Shu K.K. The Deformation Study of High Building Using RTK-GPS: A First Experience in Malaysia FIG Working Week 2005 and April 2005 GSDI-8 16–21 1–11 Cairo Egypt 2005. Available: https://www.fig.net/resources/proceedings/fig_proceedings/cairo/papers/ts_43/ts43_01_wanaziz_etal.pdf

  • [14] Zaczek-Peplinska J. Falaciński P. Evaluation of possibilities to apply laser scanning for estimation of conditions of concrete Report on Geodesy 2011 91(1) 539–546.

  • [15] Zogg H.M. (2008). Investigations of High Precision Terrestrial Laser Scanning with Emphasis on the Development of a Robust Close-Range 3D-Laser Scanning System Dissertation ETH Zurich No. 18013 Zurich 2008. Available: http://www.igpdata.ethz.ch/berichte/Blaue_Berichte_PDF/98.pdf

Search
Journal information
Impact Factor


CiteScore 2018: 1.03

SCImago Journal Rank (SJR) 2018: 0.213
Source Normalized Impact per Paper (SNIP) 2018: 1.106

Cited By
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 746 75 3
PDF Downloads 172 75 2