Static Load Test on Instrumented Pile – Field Data and Numerical Simulations

Open access

Abstract

Static load tests on foundation piles are generally carried out in order to determine load – the displacement characteristic of the pile head. For standard (basic) engineering practices this type of test usually provides enough information. However, the knowledge of force distribution along the pile core and its division into the friction along the shaft and the resistance under the base can be very useful. Such information can be obtained by strain gage pile instrumentation [1]. Significant investigations have been completed on this technology, proving its utility and correctness [8], [10], [12]. The results of static tests on instrumented piles are not easy to interpret. There are many factors and processes affecting the final outcome. In order to understand better the whole testing process and soil-structure behavior some investigations and numerical analyses were done. In the paper, real data from a field load test on instrumented piles is discussed and compared with numerical simulation of such a test in similar conditions. Differences and difficulties in the results interpretation with their possible reasons are discussed. Moreover, the authors used their own analytical solution for more reliable determination of force distribution along the pile. The work was presented at the XVII French-Polish Colloquium of Soil and Rock Mechanics, Łódź, 28–30 November 2016.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Bustamante M. Doix B. A new model of LPC removable extensometers Proceedings of 4th Int. Conf. on Pilling and Deep Foundations STRESA Italy April 7–12 1991.

  • [2] Dembicki E. Cudny M. Krasiński A. Zaleski K. Pylon foundation of a cable stayed bridge at the motorway ring road of Wrocław 18th International Conference on Soil Mechanics and Geotechnical Engineering Paris September 2–6 2013.

  • [3] Fellenius B.H. Tangent modulus of piles determined from strain data The ASCE Geotechnical Engineering Division Foundation Congress 1989 Vol. 1 500–510.

  • [4] Fellenius B.H. Brusey W.G. Pepe F. Soil setup variable concrete modulus and residual load for tapered instrumented piles in sand ASCE Specialty Conf. on Performance Confirmation of Constructed Geotech. Facilities University of Massachusetts Amherst USA April 9–12 2000.

  • [5] Fellenius B.H. Determining the resistance distribution in piles. Part 1: Notes on of no-load reading and residual load. Part 2: Method for determining the residual load Geotechnical News Magazine. 2002 20(2) 35–38 and 20(3) 25–29.

  • [6] Fellenius B.H. Determining the true distributions of load in instrumented piles ASCE International Deep Foundation Congress Orlando Florida 2002.

  • [7] Fellenius B.H. Unified design of piled foundations with emphasis on settlement ASCE Current Practice and Future Trends in Deep Foundations GSP No. 125 Los Angeles California 2004 253–275.

  • [8] Fellenius B.H. Kim S.R. Chung S.G. Long-term monitoring of strain in strain-gage instrumented piles ASCE Journal of Geotechnical and Geoenvironmental Engineering 2009 135(11) 1583–1595.

  • [9] Fellenius B.H. Ochoa M. Testing and design of a piled foundation project. A case history Geotechnical Engineering Journal of the Southeast Asian Geotechnical Society 2009 40(3) 129–137.

  • [10] Kim S.R. Chung S.G. Fellenius B.H. Distribution of residual load and true shaft resistance for a driven instrumented test pile Canadian Geotechnical Journal 2011 (48)4 583–598.

  • [11] Krasiński A. Sieńko R. Pomiar pionowego rozkładu siły w palu podczas testów statycznych 56 Konferencja Naukowa Kielce–Krynica 19–24.09.2010 (in Polish).

  • [12] Krasiński A. Sieńko R. Wykorzystanie pomiaru pionowego rozkładu siły w palu do interpretacji testów statycznych Magazyn Autostrady 2010 11 24–28 (in Polish).

  • [13] Krasiński A. Wyniki badań terenowych pali i kolumn wkręcanych Inżynieria Morska i Geotechnika 2011 6 (in Polish).

  • [14] Krasiński A. Numerical simulation of screw displacement pile interaction with non-cohesive soil Archives of Civil and Mechanical Engineering 2014 Vol. 14 No 1. 122–133.

  • [15] Krasiński A. Kusio T. Pile model tests using strain gauge technology Studia Geotechnica et Mechanica 2015 37(3) 49–52.

  • [16] Liu B. Zhang D. Xi P. Mechanical behaviors of SD and CFA piles using BOTDA-based fiber optic sensor system: A comparative field test study Measurement July 2017 Vol. 104 253–262. DOI: 10.1016/j.measurement.2017.03.038.

  • [17] Sahajda K. Discussion to the paper of A. Krasiński: “The results of field tests on screw piles and columns” Inżynieria Morska i Geotechnika 2012 Vol. 33 No. 2 114–118 (in Polish).

  • [18] Siegel T.C. Mcgillivray A. Interpreted residual load in an augered cast-in-place pile 34th Annual Conference on Deep Foundations Deep Foundations Institute 2009 173–182.

Search
Journal information
Impact Factor


CiteScore 2018: 1.03

SCImago Journal Rank (SJR) 2018: 0.213
Source Normalized Impact per Paper (SNIP) 2018: 1.106

Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 644 149 6
PDF Downloads 860 450 39