Identification of the Carbonation Zone in Concrete using X-Ray Microtomography

Open access

Abstract

The article presents an application of X-ray microtomography for identification of the carbonation zone in concrete material. A concrete specimen subjected earlier to harsh environmental conditions is investigated. The material is firstly checked with the use of chemical corrosion indicators and then is subjected to microstructural analysis performed with the use of X-ray microtomography. Two different settings of scanning parameters are applied implying the image resolutions of approximately 14 μm per 1 pixel and about 7 μm per 1 pixel, respectively. The results obtained are then compared and analyzed. The depth of the carbonation zone is evaluated based on the attenuation curve. The paper highlights also the significance of the corrosion phenomenon in concrete structures. Details of the deterioration mechanisms in concrete are shortly presented.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] VILLAIN G. THEIRY M. PLATRET G. Measurement methods of carbonation profiles in concrete: thermogravimetry chemical analysis and gammadensimetry Cement and Concrete Research 2007 Vol. 37 1182-1192.

  • [2] LO Y. LEE H.M. Curing effects on carbonation of concrete using a phenolphthalein indicator and Fourier-transform infrared spectroscopy Building and Environment 2002 Vol. 37 507-514.

  • [3] CHANG C.-F. CHEN J.-W. The experimental investigation of concrete carbonation depth Cement and Concrete Research 2006 Vol. 36 1760-1767.

  • [4] CNUDDE V. BOONE M.N. High-resolution X-ray computed tomography in geosciences: A review of the current technology and applications Earth-Science Review 2013 Vol. 123 1-17.

  • [5] RADON J. Über die Bestimmung von Funktionen durch ihre Integralwerte längs bestimmter Mannigfaltigkeiten Ber. Verb. Sächs. Akad. Wiss. Leipzig Math.-Nat. Kl. 1917 Vol. 69 262-277.

  • [6] CORMACK A.M. Representation of a function by its line integrals with some radiological applications J. Appl. Phys. 1963 Vol. 34 2722-2727

  • [7] CORMACK A.M. Representation of a function by its line integrals with some radiological applications II J. Appl. Phys. 1964 Vol. 35 2908-2913.

  • [8] HOUNSFIELD G.M. Computerized traverse axial scanning (tomography): Part I. Description of system British Journal of Radiology 1973 Vol. 46 1016-1022.

  • [9] MONTEIRO P.J.M. KIRCHHEIM A.P. CHAE S. FISCHER P. MACDOWELL A.A. SCHAIBLE E. WENK H.R. Characterizing the nano and micro structure of concrete to improve its durability Cement and Concrete Research 2009 Vol. 31 577-584.

  • [10] EPSTEIN C.L. Introduction to Mathematics of Medical Imaging: Chapter 3. A basic model for tomography SIAM USA 2003.

  • [11] KIERNOŻYCKI W. Betonowe konstrukcje masywne SPC Kraków 2003.

  • [12] NEVILLE A. Properties of concrete Pearson Education Ltd. England 1996.

  • [13] FELDKAMP L.A. DAVIS L.C. KRESS J.W. Practical conebeam algorithm Journal of Optical Society of America 1984 Vol. 1 No. 6 612-619.

  • [14] HAN J. SUN W. PAN G. X-ray microtomography of the carbonation front shape evolution of the cement mortar and modeling of accelerated carbonation reaction Journal of Wuhan University of Technology-Mater. Sci. Ed. 2013 Vol. 28 No. 2 303-308.

Search
Journal information
Impact Factor

CiteScore 2018: 1.03

SCImago Journal Rank (SJR) 2018: 0.213
Source Normalized Impact per Paper (SNIP) 2018: 1.106

Cited By
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 210 127 1
PDF Downloads 131 87 8