The paper is focused on additive manufacturing (AM) which is the process of producing objects from a three-dimensional (3D) model by joining materials layer by layer, as opposed to the subtractive manufacturing methodologies , directly from raw material in powder, liquid, sheet, or a filament form without the need for moulds, tools, or dies. The article demonstrates potential environmental implications of additive manufacturing related to the key issues including energy use, occupational health, waste and lifecycle impact. AM provides a cost-effective and time-efficient way to fabricating products with complicated geometries, advanced material properties and functionality. Based on this review, we identified that additive manufacturing will have a significant societal impact in the near future. A critical technical review of the promises and potential issues of AM is beneficial for advancing its further development.
If the inline PDF is not rendering correctly, you can download the PDF file here.
 ASTM International, “F2792-12a - Standard Terminology for Additive Manufacturing Technologies,” Rapid Manuf. Assoc., pp. 10–12, 2013.
 KELLENS, K., BAUMERS, M., GUTOWSKI, T. G., FLANAGAN, W., LIFSET, R., DUFLOU, J. R. 2017. Environmental Dimensions of Additive Manufacturing: Mapping Application Domains and Their Environmental Implications. J. Ind. Ecol., 21, pp. S49–S68.
 Wohlers, Wohlers report 2017 : 3D printing and additive manufacturing state of the industry : annual worldwide progress report., 22nd ed. FORT COLLINS, COLORADO, USA: Wohlers Associates, Inc., 2017.
 FALUDI, J., BAUMERS, M., MASKERY, I., HAGUE, R. 2017. Environmental Impacts of Selective Laser Melting: Do Printer, Powder, Or Power Dominate? J. Ind. Ecol., 21, pp. S144–S156.
 PACHAURI, L. A., MEYER, R. K. 2014 Climate Change 2014: Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Geneva, Switzerland: IPCC.
 LIGON, S. C., LISKA, R., STAMPFL, J., GURR, M., MÜLHAUPT, R. 2017. Polymers for 3D Printing and Customized Additive Manufacturing. Chem. Rev., 117(15), pp. 10212–10290.
 KRUTH, J. P., LEU, M. C., NAKAGAWA, T. 1998. Progress in Additive Manufacturing and Rapid Prototyping. CIRP Ann., 47(2), pp. 525–540.
 CHEN, D., HEYER, S., IBBOTSON, S., SALONITIS, K., STEINGRÍMSSON, J. THIEDE, G.. 2015. Direct digital manufacturing: definition, evolution, and sustainability implications. J. Clean. Prod., Vol. 107, pp. 615–625.
 SALONITIS, K. 2014. Stereolithography. Compr. Mater. Process., pp. 19–67.
 Le BOURHIS, F., KERBRAT, O., HASCOET, J.-Y., MOGNOL, P. 2013. Sustainable manufacturing: evaluation and modeling of environmental impacts in additive manufacturing. Int. J. Adv. Manuf. Technol., 69(9–12), pp. 1927–1939.
 BOURS, J., ADZIMA, B., GLADWIN, S., CABRAL, J., MAU, S. 2017. Addressing Hazardous Implications of Additive Manufacturing: Complementing Life Cycle Assessment with a Framework for Evaluating Direct Human Health and Environmental Impacts. J. Ind. Ecol., 21, pp. S25–S36.
 REJESKI, D., ZHAO, F., HUANG, Y. 2018. Research needs and recommendations on environmental implications of additive manufacturing. Addit. Manuf., 19, pp. 21–28.
 KELLENS, K., MERTENS, R., PARASKEVAS, D., DEWULF, W., DUFLOU, J. R. 2017. Environmental Impact of Additive Manufacturing Processes: Does AM Contribute to a More Sustainable Way of Part Manufacturing? Procedia CIRP, 61, pp. 582–587.
 GUNGOR, A., GUPTA, S. M. 1999. Issues in environmentally conscious manufacturing and product recovery: a survey Askiner. Comput. Ind. Eng., 36, pp. 811–853.
 DRIZO, A., PEGNA, J. 2006. Environmental impacts of rapid prototyping: an overview of research to date. Rapid Prototyp. J., 12(2), pp. 64–71.
 FRAZIER, W. E. 2014. Metal additive manufacturing: A review. J. Mater. Eng. Perform., 23(6), pp. 1917–1928.
 NARODOSLAWSKY, M., SHAZAD, K., KOLLMANN, R., SCHNITZER, H. 2015. LCA of PHA production - identifying the ecological potential of bio-plastic. Chem. Biochem. Eng. Q., 29, pp. 299–305.
 J. Faludi, C. Bayley, S. Bhogal, and M. Iribarne, “Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment,” Rapid Prototyp. J., vol. 21, no. 1, pp. 14–33, 2015.
 FALUDI, J., HOANG, T., GORMAN, P., MULVIHILL, M. 2016. Aiding alternatives assessment with an uncertainty-tolerant hazard scoring method. J. Environ. Manage., 182, pp. 111–125.
 YOSOFI, M., KERBRAT, O., MOGNOL, P. 2018. Framework to Combine Technical, Economic and Environmental Points of View of Additive Manufacturing Processes. Procedia CIRP, 69, pp. 118–123.
 FALUDI, J., VAN SICE, C. M., SHI, Y., BOWER, J., BROOKS, O. M. K. 2019. Novel materials can radically improve whole-system environmental impacts of additive manufacturing. J. Clean. Prod., 212, pp. 1580–1590.
 SONG, R., TELENKO, C., WOODRUFF, G. W. 2016. Material waste of commercial FDM printers under realstic conditions. In: Solid Freeform Fabrication 2016: Proceedings of the 26th Annual International Solid Freeform Fabrication 2016: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, pp. 1217–1229.
 STEPHENS, B., AZIMI, P., EL ORCH, Z., RAMOS, T. 2013. Ultrafine particle emissions from desktop 3D printers. Atmos. Environ., 79, pp. 334–339.
 AFSHAR-MOHAJER, N., WU, C. Y., LADUN, T., RAJON, D. A., HUANG, Y. 2015. Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer. Build. Environ., 93(P2), pp. 293–301.
 HUANG, S. H., LIU, A., MOKASDAR, P., HOU, L. 2013. Additive manufacturing and its societal impact: A literature review. Int. J. Adv. Manuf. Technol., 67(5–8), pp. 1191–1203.