<abstract xmlns="http://www.w3.org/1999/xhtml">The Zletovo is lead–zinc (Pb–Zn) deposit, adjacent to the Plavica volcanic centre (R. Macedonia) with high-sulphidation and porphyry mineralisation. The analysis of fluid inclusions showed homogenisation temperatures in the range 335–145°C, which reflects phases of pulsation of hydrothermal solutions and defined into four groups from the lowest to the highest temperatures. The frequency of the homogenisation temperatures ranged from 265 to 125°C and with the most dominant from 245 to 225°C, from 225 to 205°C and from 145 to 125°C. Also, it was confirmed that hydrothermal ore-bearing solutions were defined as NaCl-type with range from 4.4 to 8.6 wt% NaCl equivalent. The latest stage salinities ranged from 3 to 12 wt% NaCl equivalent, where those from 10 to 12 wt% and from 6 to 8 wt% NaCl equivalent, prevailed. This suggests that hydrothermal solutions within analysed quartz grains were at final mineralizing phase. Density of fluid inclusions ranged from 0.7 to 0.95g/cm3. Calculated pressures and paleo-depths of mineralisation ranged from 14 to 130 bar and from 0.6 to 0.8 km.</abstract>

Faculty of Natural and Technical Sciences

Faculty of Natural Sciences and Engineering, Department of Geology

Contribution to Understanding of Ore Fluids in the Zletovo Mine Based on Fluid Inclusion Data

<abstract xmlns="http://www.w3.org/1999/xhtml">Groundwater flow of the basement terrains of the Ibarapa region was studied by carrying out pumping test and measurement of borehole inventory. The view was to identify the associated aquifer systems from the time-drawdown curves, quantify the estimable hydraulic properties and develop hypothetical models for the understanding of the groundwater flow in the area underlain by diverse crystalline bedrocks. Three aquifer types were identified namely, dual, leaky and regolith. The yield of groundwater in dual and leaky aquifers that dominated terrains underlain by amphibolite and gneisses was sustainable, but the discharge of regolith aquifers mainly associated with migmatite and granite terrains declined at late pumping stage. The transmissivities of the dual and leaky aquifers were between 2.02 and 11.65 m2/day, while those of regolith aquifers were mostly less than 1.00 m2/day. The average aquifer transmissivities in m2/day by bedrocks were: 6.85, 2.57, 0.76 and 1.72, correspondingly. The inter-relationships between transmissivities and groundwater discharge showed diverse aquifer representations, from sustainable high-yielding to unsustainable low-yielding types. Conscientious effort is, therefore, required for well construction in the area.</abstract>

Sustainability and Conceptual Groundwater Hydraulic Models of Basement Aquifers

<abstract xmlns="http://www.w3.org/1999/xhtml">The photovoltaic technologies have been developed year by year in different countries; however, there are some countries where this kind of energy is being born, such as the Brazilian case. In this paper, some important parameters are analysed and applied to different solar cell materials, identifying that if the fossil fuels were substituted by solar cells, it would reduce the CO2 emissions by 93.2%. In addition, it is shown that the efficiency of solar cells is not as farther as it could be thought from coal thermoelectrical plants in Brazil and the cost of energy using solar cells could be as good as these thermoelectrical plants. Finally, the potentiality of Brazilian territory to implant this technology is presented, identifying that with the use of 0.2% of the territory, the energy demand could be supplied.</abstract>

Graduation Program in Materials Engineering and Technology

Pontifical Catholic University of Rio Grande do Sul (PGETEMA/PUCRS)

Pontifical Catholic University of Rio Grande do Sul (PUCRS)

Photovoltaic Solar Energy: Is It Applicable in Brazil? – A Review Applied to Brazilian Case

<abstract xmlns="http://www.w3.org/1999/xhtml">Electrical resistivity tomography (ERT) was used for delineating significant subsurface hydrogeological features for sustainable groundwater development in Etioro-Akoko area, Southwestern Nigeria. This study was necessitated by challenges posed on groundwater supplies from wells and boreholes in Etioro-Akoko and the neighbouring fast growing towns and villages. Field data were acquired over the area with ABEM Lund Resistivity Imaging System and were subsequently processed and inverted through RES2DINVx64 software. Results showed four distinct subsurface layers: topsoil, weathered layer, fractured bedrock and fresh bedrock (basal unit). Localised bedrock depressions occasioned by fracturing and deep weathering of less stable bedrock minerals were delineated with resistivity and thickness values ranging from 50 to 650 Ωm and 12 to ---gt--- 25 m, respectively. The localised depressions mirrored uneven bedrock topography and served as the preferential groundwater storage and hydrogeological zones in the area. The two hydrogeological zones significant for groundwater development included overburden-dependent aquifers and fractured dependent bedrock aquifers. It was, therefore, concluded that groundwater storage potential was depended on hydrogeological zones particularly at major localised bedrock depressions where fractures and groundwater recharges/discharges were evident. Wells and boreholes were proposed at bedrock depressions with thickness value not less than 12 and ---gt--- 25 m, respectively, for enhanced groundwater sustainability and quality assurance in the area.</abstract>

Electrical Resistivity Tomography for Sustainable Groundwater Development in a Complex Geological Area

<abstract xmlns="http://www.w3.org/1999/xhtml">The Lean concept is recognisable by how fast innovations are implemented and production processes are improved. Likewise, analysis of the implementation of Lean concepts so far has shown that Lean methods and tools cannot be applied to small and medium enterprises (SMEs) in the same measure as they can be applied to large enterprises.This paper aims to present a critical review of the implementation of Lean concepts in SMEs with the claim that Lean concept can be successfully applied in all branches of industry, provided that the Lean concept is fully understood, and it’s meaning, principles and practice. Given that SMEs have limited resources, they often face difficulties during the implementation of all Lean tools and methods.Depending on the type of improvement in Kaizen activities, the Poka Yoke and Jidoka tools should be applied. Every improvement in the production process needs to be standardised as soon as possible so that the processes can become more continuous and efficient.</abstract>

Faculty of Natural Sciences and Engineering

Lean Concept in Small and Medium Enterprises

AHEAD OF PRINT

Volume 69 (2022): Issue 2 (December 2022)

Volume 69 (2022): Issue 1 (June 2022)

Volume 68 (2021): Issue 2 (December 2021)

Volume 68 (2021): Issue 1 (March 2021)

Volume 67 (2020): Issue 4 (December 2020)

Volume 67 (2020): Issue 3 (September 2020)

Volume 67 (2020): Issue 2 (June 2020)

Volume 67 (2020): Issue 1 (March 2020)

Volume 66 (2019): Issue 4 (December 2019)

Volume 66 (2019): Issue 3 (December 2019)

Volume 66 (2019): Issue 2 (June 2019)

Volume 66 (2019): Issue 1 (March 2019)

Volume 65 (2018): Issue 4 (December 2018)

Volume 65 (2018): Issue 3 (September 2018)

Volume 65 (2018): Issue 2 (September 2018)

Volume 65 (2018): Issue 1 (March 2018)

Volume 64 (2017): Issue 4 (December 2017)

Volume 64 (2017): Issue 3 (September 2017)

Volume 64 (2017): Issue 2 (July 2017)

Volume 64 (2017): Issue 1 (March 2017)

Volume 63 (2016): Issue 4 (December 2016)

Volume 63 (2016): Issue 3 (September 2016)

Volume 63 (2016): Issue 2 (July 2016)

Volume 63 (2016): Issue 1 (June 2016)

Materials and Geoenvironment

 Description:  Old title: Rudarsko-metalurški zbornik (Mining and Metallurgy Quaterly).  Is issued quarterly by the Faculty of Natural Sciences and Engineering, Ljubljana, Velenje Coal Mine, Velenje, Institute for Mining, Geotechnology and Environment (IRGO), Ljubljana and Slovenian Chamber of Engineers, Ljubljana.  Financially supported also by Ministry of Higher Education, Science and Technology Republic of Slovenia.  Issues up to the volume 62 you can find on our old web page at address: www.rmz-mg.com/contents.htm  The journal does not have article processing charges (APCs) nor article submission charges.  Archiving  Sciendo archives the contents of this journal in Portico - digital long-term preservation service of scholarly books, journals and collections.  Plagiarism Policy  The editorial board is participating in a growing community of Similarity Check System's users in order to ensure that the content published is original and trustworthy. Similarity Check is a medium that allows for comprehensive manuscripts screening, aimed to eliminate plagiarism and provide a high standard and quality peer-review process. 