This paper presents an overview of additive manufacturing technologies for production of metal parts. A special attention is set to wire arc additive manufacturing (WAAM) technologies, which include MIG/MAG welding, TIG welding and plasma welding. Their advantages compared to laser or electron beam technologies are lower investment and operational costs. However, these processes have lower dimensional accuracy of produced structures. Owing to special features and higher productivity, the WAAM technologies are more suitable for production of bigger parts. WAAM technology has been used together with welding robot and a cold metal transfer (CMT) power source. Thin walls have been produced using G3Si1 welding wire. The microstructure and hardness of produced structures were analysed and measured. A research was done to determine the optimal welding parameters for production of thin walls with smooth surface. A SprutCAM software was used to make a code for 3D printing of sample part.
If the inline PDF is not rendering correctly, you can download the PDF file here.
 Frazier W. E. (2014): Metal additive manufacturing: A review. Journal of Materials Engineering and Performance 23(6) pp. 1917–1928.
 Wong K.V. Hernandez A. (2012): A review of additive manufacturing. ISRN Mechanical Engineering 2012 pp. 1–10.
 Merz R. (1994): Shape deposition manufacturing (Doctoral dissertation) Retrieved from https://www.researchgate.net/publication/30873042_Shape_deposition_manufacturing pp. 169.
 Weiss L.E. Merz R. Prinz F.B. Neplotnik G. Padmanabhan P. Schultz L. Ramaswami K. (1997): Shape deposition manufacturing of heterogeneous structures. Journal of Manufacturing Systems 16(4) pp. 239–248.
 Williams S.W. Martina F. Addison A.C. Ding J. Pardal G. Colegrove P. (2016): Wire+ arc additive manufacturing. Materials Science and Technology 32 pp. 641–647.
 Martina F. Roy M.J. Colegrove P.A. Williams S.W. (2014): Residual stress reduction in high pressure interpass rolled wire+ arc additive manufacturing Ti-6Al-4V components. Proc. 25th Int. Solid Freeform Fabrication Symp pp. 89–94.
 Colegrove P.A. et al. (2014): High pressure interpass rolling of wire+ arc additively manufactured titanium components. Advanced Materials Research 996 pp. 694–700.
 Nilsiam Y. Haselhuhn A. Wijnen B. Sanders P. Pearce J.M. (2015): Integrated Voltage—Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer. Machines 3(4) pp. 339–351.
 SprutCam software [cited 17/8/2018] Available on: <http://www.sprutcam.com>.