Asymmetric rolling process

Open access

Abstract

Asymmetric rolling is a novel technique used to control both the texture and the grain refinement of metallic materials. The aim of asymmetric rolling is to apply a large shear strain uniformly through the thickness of the plate, by maintaining a high degree of friction between the sheet and the rolls. It can be used to improve the formability of material. One of the advantages of asymmetrical rolling is that the rolling force and torque can be decreased. The methods used for the asymmetric rolling are single roll drive, different work roll speeds, different work roll diameters or different lubricated work roll surfaces.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] Buxton S.A.E. Browningt S.C. (1972): Turn-up and turn-down in hot rolling. Journal of Mechanical Engineering Science 14(4) pp. 245-254.

  • [2] Jin H. Lloyd D.J. (2004): The Tensile Response of a Fine-Grained AA5754 Alloy Produced by Asymmetric Rolling and Annealing. Metallurgical and Materials Transactions A 35 A pp. 997-1006.

  • [3] Kang S.B. Min B.K. Kim H.W. Wilkinson D.S. Kang J. (2005): Effect of Asymmetric Rolling on the Texture and Mechanical Properties of AA6111-Aluminium Sheet. Metallurgical and Materials Transactions A 36A pp. 3141-3149.

  • [4] Jin H. Lloyd D.J. (2005): The reduction of planar anisotropy by texture modification through asymmetric rolling and annealing in AA5754. Materials Science and Engineering A 399 pp. 358-367.

  • [5] Kawałek A. (2007): The analysis of the asymmetric plate rolling process. Journal of Achievements in Materials and Manufacturing Engineering 23(2) pp. 63-66.

  • [6] Kiefer T. Kugi A. (2008): An Analytical Approach for Modelling Asymmetrical Hot Rolling of Heavy Plates. Mathematical and Computer Modelling of Dynamical Systems 14 pp. 1-19.

  • [7] Sidor J. Miroux A. Petrov R. Kestens L. (2008): Microstructural and crystallographic aspect of conventional and asymmetric rolling processes. Acta Materialia 56 pp. 2495-2507.

  • [8] Sidor J. Miroux A. Petrov R. Kestens L. (2008): Controlling the plastic anisotropy in asymmetrically rolled aluminium sheets. Philosophical Magazine 88 pp. 3779-3792.

  • [9] Roumina R. Sinclair C. (2008): Deformation geometry and through-thickness strain gradients in asymmetric rolling. Metallurgical and Materials Transaction A 39(2495) pp. 2495-2503.

  • [10] Zhang S.H. Zhao D.W. Gao C.R. Wang G.D. (2012): Analysis of asymmetrical sheet rolling by slab method. International Journal of Mechanical Sciences 65 pp. 168-176.

  • [11] Nikolaev V.A. Vasilyev A.A. (2010): Analysis of Strip Asymmetrical Cold Rolling Parameters. Metallurgical and Mining Industry 2 pp. 405-412.

  • [12] Jin H. Lloyd D.J. (2010) The different effects of asymmetric rolling and surface friction on formation of shear texture in aluminium alloy AA5754. Materials Science and Technology 26(6) pp. 754-760.

  • [13] Liu J. Kawalla R. (2012): Influence of asymmetric hot rolling on microstructure and rolling force with aus- tenitic steel. Transactions of Nonferrous Metals Society of China 22 pp. 504-511.

  • [14] Anders D. Münker T. Artel J. Weinberg K. (2012): A dimension analysis of front-end bending in plate rolling applications. Journal of Materials Processing Technology 212 pp. 1387-1398.

  • [15] Nilsson A. Salvator I. Putz P.-D. Goldhahn G. Malbrancke J. (2012): Using asymmetrical rolling for increased production and improved material properties. European Union.

  • [16] Inoue H. (2012): Texture Control of Aluminium and Magnesium Alloys by the Symmetric/Asymmetric Combination Rolling Process. Materials Science Forum 702-703 pp. 68-75.

  • [17] Azbanbayev E. Isagulov A. Ashkeyev Z. (2013): Mathematical simulation of the process of rolling in the back taper rolls. In: 22nd International Conference on Metallurgy and Materials 15.5.-17.5.2013 Brno Czech Republic.

  • [18] Wronski S. Wierzbanowski K. Wronski M. Bacroix B. (2014): Three dimensional analysis of asymmetric rolling with flat and inclined entry. Archives of Metallurgy and Material 59(2) pp. 585-591.

  • [19] Aljabri A. Jiang Z. Wie D. (2014): Analysis of thin strip profile during asymmetrical cold rolling with roll crossing and shifting mill. Advanced Materials Research 894 pp. 212-216.

  • [20] Tamini S. Correia J.P. Lopes A.B. Ahzi S. Barlat F. Gracio J.J. (2014): Asymmetric rolling of thin AA5182 sheet: Modellingand experiments. Materials Science and Engineering A 603 pp. 150-159.

  • [21] Zuo Y.-b. Fu X. Cui J.-z. Tang X.-y. Mao L. Li L. Zhu Q.-f. (2014): Shear deformation and plate shape control of hot-rolled aluminium alloy thick plate prepared by asymmetric rolling process. Transactions of Nonferrous Metals Society of China 24 pp. 2220-2225.

  • [22] Dutta S. Kaiser M.S. (2014): Effect of asymmetric rolling on formability of pure aluminium. Journal of Mechanical Engineering 44(2) pp. 94-99.

  • [23] Ucuncuoglu S. Ekerim A. Secgin G.O. Duygulu O. (2014): Effect of asymmetric rolling process on the microstructure mechanical properties and texture of AZ31 magnesium alloys sheet produced by twin roll casting technique. Journal of Magnesium and Alloys 2 pp. 92-98.

  • [24] Pesin A. Pustovoytov D. Sverdlik M. (2014): Influence of Different Asymmetric Rolling Processes on Shear Strain. International Journal of Chemical Molecular Nuclear Materials and Metallurgical Engineering 8(6) pp. 477-479.

  • [25] Parvizi A. Pasoodeh B. Abrinia K. Akbari H. (2015): Analysis of curvature and width of the contact area in asymmetrical rolling of wire. Journal of Manufacturing Processes 20 pp. 245-249.

  • [26] Lee K. Han J. Park J. Kim B. Ko D. (2015): Prediction and control of front-end curvature in hot finish rolling process. Advances in Mechanical Engineering 7(11) pp. 1-10.

  • [27] Alexa V. Ratiu S. Kiss I. (2015): Metal rolling - Asymmetrical rolling process. In: International Conference on Applied Sciences pp. 1-10.

  • [28] Pesin A. Chukin M. Pustovoytov D. (2015): Finite Element Analysis of Symmetric and Asymmetric Threeroll Rolling Process. MATEX Web of Conference 26 03006.

  • [29] Liu X. Liu X.-h. Song M. Sun X.-k. Liu L.-z. (2016): Theoretical analysis of minimum metal foil thickness achievable by asymmetric rolling with fixed identical roll diameters. Transactions of Nonferrous Metals Society of China 26 pp. 501-507.

  • [30] Jianping L. Zhenguang L. Jing L. (2016): Influence of Asymmetric Hot Rolling on Microstructure and Mechanical Property of Ti-6Al-4V Alloy Sheet. Rare Metal Materials and Engineering 45(5) pp. 1168-1174.

  • [31] Bintu A. Vincze G. Picub R.C. Lopes A.B. (2016): Effect of symmetric and asymmetric rolling on the mechanical properties of AA5182. Materials and Design 100 pp. 151-156.

  • [32] Minton J.J. Cawthorn C.J. Brambley E.J. (2016): Asymptotic analysis of asymmetric thin sheet rolling. International Journal of Mechanical Sciences 113 pp. 36-48.

  • [33] Ma B. Li C. Wang J. Cai B. Sui F. (2016): Influence of asymmetric hot rolling on through-thickness microstructure gradient of Fe-20Mn-4Al-0.3C non-magnetic steel. Material Science and Engineering A671 pp. 190-197.

  • [34] Diniz S.B. Benatti E.A. Paula A. dos S. Bolmaro R.E. da Silva L.C. Meirelles B.G. (2016): Microstructural evaluation of an asymmetrically rolled and recrystallized 3105 aluminium alloy. Journal of Materials Research and Technology 5(2) pp. 183-189.

  • [35] History of Steelworks’ Plant and Equipment [online]. Talk Talk 2017 [cited 1/7/2017]. Available on: .

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 494 326 13
PDF Downloads 237 169 9