The rutting and cracking of pavements has become very common problem in India. Also the quantity of plastic waste has significantly increased in the recent year due to industrialization and population growth. Improper disposal of these plastic wastes has caused various environmental problems, hence the alternative use of waste plastic in bituminous concrete for road construction has been encouraged by the community. In the present study the Indirect Tensile Strength Test has been carried out on Marshall Samples confirming to ASTM D6931-12. Three different processes (dry process, wet process and combined process) of mixing of waste plastic were used during experimentation. It was found that the indirect tensile strength (ITS) and tensile strength ratio (TSR) of sample significantly increase up to 8%, 6% and 12% for dry process, wet process and combined process respectively for LDPE and HDPE type of waste plastic.
If the inline PDF is not rendering correctly, you can download the PDF file here.
. Israa Saeed Jawad Al-Haydari and Ghadah Ghassan Masued (2017), “Benefit of using Expanded Polystyrene Packaging Material to Improve Pavement Mixture Properties”, Applied Research Journal, Vol.3 (Issue 11), PP.332-342.
. Dr. Hamed M. Jassim, Omar T. Mahmood and Sheelan A. Ahmed (2014), “Optimum use of Plastic Waste to Enhance the Marshall Properties and Moisture Resistance of Hot Mix Bitumen”, International Journal of Engineering Trends and Technology, Vol.7, No.1, P.223.
. Sabina, Tabrez A. Khan, Sangita, D. K. Sharma and B. M. Sharma (2009), “Performance Evaluation of Waste Plastic/Polymer Modified Bituminous Concrete Mixes”, Journal of Scientific & Industrial Research, Vol.68 (11), PP.975-979.
. Dipankar Sarkar and Manish pal (2016),” A Laboratory Study Innovating use of Brick Aggregate along with Plastic Modified Bitumen in Preparation of Bituminous Concrete for The Road of Tripura”, ARPN Journal of Engineering and Applied Science, vol.11, no.1, pp 570-576
. A. U. Ravi Shankar, K. Koushik and Goutham Sarang (2013), “Performance Studies On Bituminous Concrete Mixes Using Waste Plastics”, Highway Research Journal, Vol.6, No.1, pp 1-11.
. Pareek A.,Gupta T. and Sharma R.K (2012), “Performance of polymer modified bitumen for flexible pavement”, International Journal of Structural and Civil Engineering Research, Vol. 1, No.1. pp 77-86.
. Punith. V.S., Veeraragavan. A. and Amirkhnian S.N (2011), “Evaluation of Reclaimed Polyethylene Modified Bitumen Concrete Mixture ̋, International Journal of Pavement Engineering, Vol 4,No. 1, pp.1-10.
. Tiwari, A.V., Rao, Y., R., M., Study of plastic waste bituminous concrete using dry process of mixing for road construction. Transport & Logistics: the International Journal, 2017; Volume 17, Issue 43, November 2017, ISSN 2406-1069
. Tiwari, Anurag Virendra, and Y. R. M. Rao. “Investigation on Utility of Plastic Waste as an Additive for Bituminous Concrete Using Wet Process of Mixing.” Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport 6 (72) (2017): 83-92.
. IS 2386 (Part I) - 1963 Indian Standard. Methods of Test For Aggregates for Concrete -Part I Particle Size And Shape.
. IS 2386-3 - 1963 Methods Of Test For Aggregates For Concrete - Part III Specific Gravity, Density, Voids, Absorption and Bulking
. IS 2386 (Part IV) - 1963 Indian Standard. Methods of Test for Aggregates for Concrete. Part IV Mechanical Properties
. IS 1203: 1978 Methods of testing tar and bituminous material - Determination of penetration
. IS 1205: 1978 Methods for testing tar and bituminous materials - Determination of Softening point
. IS 1202: 1978 Methods of testing tar and bituminous materials - Determination of specific gravity
[l6]. IS 1208: 1978 Methods of testing tar and bituminous material - Determination of ductility
. ASTM D 6931 (2007), “Indirect Tensile (IDT) Strength for Bituminous Mixtures”, American Society for Testing and Materials, Philadelphia.