Analysis of Direct Torque Control with Space Vector Modulation for Synchronous Reluctance Motor Motion Control Applications and a Comparison with Other Torque-Control Algorithms

Open access

Abstract

Motion control is facing an increasing popularity in the present research activities. Owing to the expected wide spreading of motion control applications, it can be predicted that the advancements in the field of electric motor drives will have a high level of influence on the new results in the field of motion control. The synchronous reluctance motor drives mean an excellent and yet cost-effective solution for actuators in motion control applications. In this article, the direct torque control with space vector modulation is analysed as a possible candidate for synchronous reluctance motor motion control applications. Its torque-control performance is investigated as a function of torque-control sample time, and a comparison of the torque ripples is made with other torque-control algorithms by an FFT analysis.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Blaabjerg F. Kazmierkowski M. P. Zelecehowski M. Swierczynski D. and Kolomyjski W. (2005). Design and comparison direct torque control techniques for induction motors. In: 2005 European Conference on Power Electronics and Applications pp. 9 pp.-P.9. doi: 10.1109/EPE.2005.219515

  • Buja G. S. and Kazmierkowski M. P. (2004). Direct Torque Control of PWM Inverter-Fed AC Motors - A Survey. IEEE Transactions on Industrial 10Electronics 51(4) pp. 744–757. doi: 10.1109/TIE.2004.831717

  • Foo G. H. B. and Zhang X. (2016). Robust Constant Switching Frequency-Based Field-Weakening Algorithm for Direct Torque Controlled Reluctance Synchronous Motors. IEEE Transactions on Industrial Informatics 12(4) pp. 1462–1473. doi: 10.1109/TII.2016.2585646

  • Grabowski P. Z. Kazmierkowski M. P. Bose B. K. and Blaabjerg F. (2000). A Simple DirectTorque Neuro-Fuzzy Control of PWM-InverterFed Induction Motor Drive. IEEE Transactions on Industrial Electronics 47(4) pp. 863–870. doi: 10.1109/41.857966

  • Klimkowski K. (2016). An Artificial Neural Networks Approach to Stator Current Sensor Faults Detection for DTC-SVM Structure. Power Electronics and Drives 36(1) pp. 127–138. doi: 10.5277/PED160109

  • Malinowski M. Jasinski M. and Kazmierkowski M. P. (2004). Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM). IEEE Transactions on Industrial Electronics 51(2) pp. 447–454. doi: 10.1109/TIE.2004.825278

  • Malinowski M. Kazmierkowski M. P. and Trzynadlowski A. M. (2003). A Comparative Study of Control Techniques for PWM Rectifiers in AC Adjustable Speed Drives. IEEE Transactions on Power Electronics 18(6) pp. 1390–1396. doi: 10.1109/TPEL.2003.818871

  • Orłowska-Kowalska T. and Dybkowski M. (2016). Industrial Drive Systems. Current State and Development Trends. Power Electronics and Drives 36(1) pp. 5–25. doi: 10.5277/PED160101

  • Pinto J. O. Bose B. K. Da Silva L. B. and Kazmierkowski M. P. (2000). A Neural-NetworkBased Space-Vector PWM Controller for Voltage-Fed Inverter Induction Motor Drive. IEEE Transactions on Industry Applications 36(6) pp. 1628–1636. doi: 10.1109/28.887215

  • Stubenrauch F. Wittmann J. Kiermayer A. Seliger N. Hagl R. Schmitt-Landsiedel D. and Kennel R. (2017). FPGA-based high dynamic servo drive control with a 200 kHz Gallium Nitride inverter. In: 2017 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe) Warsaw pp. P.1–P.10. doi: 10.23919/EPE17ECCEEurope.2017.8098997

  • Swierczynski D. and Kazmierkowski M. P. (2002). Direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM)-simulation and experimental results. In: IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02 pp. 751–755. doi: 10.1109/IECON.2002.1187601

  • Swierczynski D. Kazmierkowski M. P. and Blaabjerg F. (2002). DSP based direct torque control of permanent magnet synchronous motor (PMSM) using space vector modulation (DTC-SVM). In: Proceedings of the 2002 IEEE International Symposium on Industrial Electronics pp. 723–727. doi:10.1109/ISIE.2002.1025821

  • Vajsz T. and Számel L. (2018). Overload-Capability Analysis of PMSM Servo- and Robot-Drives Using DTC-SVM Methods: Part 1. In: 2018 IEEE 18th International Power Electronics and Motion Control Conference (PEMC) Budapest pp. 730–736. doi: 10.1109/EPEPEMC.2018.8521929

  • Vajsz T. Számel L. and Handler Á. (2019). An Investigation of Direct Torque Control and Hysteresis Current Vector Control for Motion Control Synchronous Reluctance Motor Applications. Power Electronics and Drives 39(1) pp. 1–12.

  • Vajsz T. Számel L. and Rácz G. (2017). A Novel Modified DTC-SVM Method with Better Overloadcapability for Permanent Magnet Synchronous Motor Servo Drives. Periodica Polytechnica Electrical Engineering and Computer Science 61(3) pp. 253–263. doi: 10.3311/PPee.10428

  • Zelechowski M. Kazmierkowski M. P. and Blaabjerg F. (2005). Controller design for direct torque controlled space vector modulated (DTC-SVM) induction motor drives. In: Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE 2005) pp. 951–956. doi: 10.1109/ISIE.2005.1529052

  • Tarczewski T. Skiwski M. Grzesiak L. M. and Zielinski M. (2018). PMSM Servo-Drive Fed by SiC MOSFETs Based VSI. Power Electronics and Drives 38(1) pp. 35–45. doi: 10.2478/pead-2018-0001

  • Zhang X. and Foo G. H. B. (2019). Overmodulation of Constant-Switching-Frequency-Based DTC for Reluctance Synchronous Motors Incorporating Field-Weakening Operation. IEEE Transactions on Industrial Electronics 66(1) pp. 37–47. doi: 10.1109/TIE.2018.2826478

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 66 66 3
PDF Downloads 44 44 4