STABILITY ANALYSIS OF MRASSCC SPEED ESTIMATOR IN MOTORING AND REGENERATING MODE

Open access

Abstract

This paper deals with the stability analysis of MRAS current speed estimator in a motoring and regenerating mode. The unstable operating points of the estimator, mainly in a regenerating mode are widely discussed. The expanded version of the estimator MRASCC is proposed to provide its stability in the whole operating range. The new correction coefficients for two analyzed stabilization methods are proposed. Finally, simulation results confirming the theoretical analysis are presented

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • [1] KAŹMIERKOWSKI M.P. BLAABJERG F. KRISHNAN R. Control in Power Electronic - Selected Problems Academic Press USA 2002.

  • [2] HOLTZ J. Sensorless Control of Induction Machines - With or Without Signal Injection? IEEE Trans. Industrial Electronics 2006 53 (1) 7-30.

  • [3] ORŁOWSKA-KOWALSKA T. Sensorless induction motor drives Oficyna Wydawnicza PWr Wrocław 2003 (in Polish).

  • [4] UTKIN V. YAN Z. Sliding mode observers for electronic machines - an overview Proc. of the 28th Annual Conf. of the Industrial Electronics Society IECON 2002 Sevilla 2002 3 2 1842-1847.

  • [5] BOLDEA I. LASCU C. BLAABJERG F. A class of speed-sensorless sliding-mode observers for highperformance induction motor drives IEEE Trans. Industrial Electronics 2009 56 9 3394-3403.

  • [6] KUBOTA H. MATSUSE K. NAKANO T. DSP-based speed adaptive flux observer of induction motor. IEEE Trans. Industry Appl. 1993 29 2 344-348.

  • [7] BOUHENNA A. MANSOUR A. CHENAFA M. BELAIDI A. Feedback Gain Design Method for the Full- Order Flux Observer in Sensorless Control of Induction Motor International Journal of Computers Communications and Control 2008 3 2 135-148.

  • [8] BOUHENNA A. CHAIGNE C. BENSIALI N. ETIEN E. CHAMPENOIS G. Design of speed adaptation law in sensorless control of induction motor in regenerating mode Simulation Modelling Practice and Theory August 2007 15 7 847-863.

  • [9] ETIEN E. CHAIGNE C. BENSIALI N. On the Stability of Full Adaptive Observer for Induction Motor in Regenerating Mode IEEE Trans. Ind. Electronics 2010 57 5 1599-1608.

  • [10] HINKKANEN M. LUOMI J. Stabilization of regenerating-mode operation in sensorless induction motor drives by full-order flux observer design IEEE Trans. Ind. Electronics 2004 51 6 1318-1328.

  • [11] HARNEFORS L. HINKKANEN M. Complete stability of reduced-order and full-order observers for sensorless IM drives IEEE Trans. Ind. Electronics 2008 55 30 1319-1329.

  • [12] KUBOTA H. SATO I. TAMURA Y. et al. Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer IEEE Trans. Industry Appl. 2002 38 4 1081-1086.

  • [13] SUNWANKAWIN S. SANGWONGWANICH S. Design strategy of an adaptive full-order observer for speed-sensorless induction motor drives - Tracking performance and stabilization IEEE Trans. Industrial Electronics 2006 53 1 96-119.

  • [14] ABU-RUB H. OIKONOMOU N. Sensorless observer system for induction motor control Proc. of the IEEE Power Electronics Specialists Conference Rodos 2008 30-36.

  • [15] ORŁOWSKA-KOWALSKA T. DYBKOWSKI M. TARCHAŁA G. Analysis of the chosen estimation methods in the induction motor drives - part I - mathematical models Scientific Papers of the Institute of Electrical Machines Drives and Measurements Studies and Research 2010 30 151-161.

  • [16] DYBKOWSKI M. TARCHAŁA G. ORŁOWSKA-KOWALSKA T. Analysis of the chosen estimation methods in the induction motor drives - part II - research tests Scientific Papers of the Institute of Electrical Machines Drives and Measurements Studies and Research 2010 30 162-175.[17] SCHAUDER C. Adaptive speed identification for vector control of induction motors without rotational transducers IEEE Trans. on Industry Applications Sept./Oct. 1992 28 5 1054-1061.

  • [18] TAMAI S. et al. Speed sensorless vector control of induction motor with model reference adaptive system Proc. of IEEE/IAS 1987 189-195.

  • [19] PENG F.Z. FUKAO T. Robust speed identification for speed-sensorless vector control of induction motors IEEE Trans. on Industry Applications 1994 30 5 1234-1240.

  • [20] PENG F.Z. FUKAO T. LAI J.S. Low-speed performance of robust speed identification using instantaneous reactive power for tacholess vector control of induction motors Proc. IEEE Industry Applications Society Annual Meetings 1994 1 509-514.

  • [21] SOBCZUK D.L. Application of ANN for control of PWM inverter fed induction motor drives Ph.D. dissertation Warsaw Univ. Technol Warsaw Poland 1999.

  • [22] ORŁOWSKA-KOWALSKA T. DYBKOWSKI M. Stator current-based MRAS speed estimator for wide range speed-sensorless induction motor drive IEEE Trans. Ind. Electronics 2010 57 4 1296-1308.

  • [23] ORŁOWSKA-KOWALSKA T. TARCHAŁA G. Unified approach to the sliding-mode control and state estimation - application to the induction motor drive Bulletin of the Polish Academy of Sciences. Technical Sciences 2013 61 4 837-846.

  • [24] VONKOMER J. ZALMAN M. On the stability of current based MRAS Proc. of the 39th Annual Conf. of the Industrial Electronics Society IECON 2013 Nov. 2013 3018-3023.

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 127 41 2
PDF Downloads 87 32 4