The impact of composition dependent and process-related properties in the laser cutting of metallic glassy tapes

Open access

Abstract

A short survey is reported on the advantageous and disadvantageous properties of soft magnetic glassy tapes to build stator and rotor elements for the increase of motor efficiency. The relative high saturation magnetization and the relative permeability of these alloy groups seem to be promising in this application field. On the other hand, the sample thickness (30 µm) displays limitations in terms of a filling factor. High hardness of tapes hinders the effectivity of mechanical shaping. Laser cutting can be successful as shaping method, presuming that the extension (thickness) of heat affected zone (HAZ) can be successfully reduced below 50µm, avoiding the brittleness evolution.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Innoue A. 1999. Bulk Amorphous Alloys Non-Equilibrium Processing of Materials Pergamon Oxford 375-415

  • Lovas A. Kiss L.F. Sommer F. 1995. Hardness and thermal stability of Fe-Cr-metalloid glasses Journal of Non-Crystalline Solids 192-193 608-611 DOI: 10.1016/0022-3093(95)00415-7

  • Makino A. Inoue A. Masumoto T. 1995. Nanocrystalline soft magnetic Fe-M-B (M=Zr Hf Nb) alloys produced by crystallization of amorphous phase (overview) Materials Transactions JIM 36(7) 924-938 DOI: 10.2320/matertrans1989.36.924

  • Singh C. Sarkar D. 1992. Practical considerations in the optimization of induction motor design Electric Power Applications IEE Proceedings B 139(4) 365-373 DOI: 10.1049/ip-b.1992.0043

  • Kóti D. Szabó A. Nagy A. Cziráki Á. 2018. On the local degradation of amorphous glassy tapes during laser cutting Advanced Manufacturing and Repair Technologies in Vehicle Industry 151-162 ISBN 978-83-945647-1-1

  • Kovac J. Novák L. Hubac L. 2015. Impulse annealing as possibility of modification of magnetic properties of amorphous metallic alloys Journal of Electrical Engineering 66(7) 142-145 ISSN 1335-3632

  • Malinowski J. McCormick J. Dunn K. 2004. Advances in construction techniques of AC induction motors: Preparation of super-premiumefficiency levels IEEE Transactions on Industry Application 40(6) 1665-1670 DOI: 10.1109/TIA.2004.836300

  • Bán K. Nagy M. Cziráki Á. Fogarassy Zs. 2018. The study of heat affected zone in soft magnetic glassy ribbons during laser cutting Advanced Manufacturing and Repair Technologies in Vehicle Industry 17-28 ISBN 978-83-945647-1-1

  • Satoru Simizu Ohodnicki Paul R. McHenry Michael E. 2018. Metal Amorphous Nanocomposite Soft Magnetic Material-Enabled High Power Density Rare Earth Free Rotational Machines IEEE Transactions on Magnetics 54(5) DOI: 10.1109/TMAG.2018.2794390

  • Tsai-Wei Wu Spaepen F. 1990. The relation between embrittlement and structural relaxation of an amorphous metal Philosofical Magazine B 62(4) 739-750 DOI: 10.1080/13642819008219307

  • Yannis L. Karnavasa Chasiotisb Ioannis D. 2017. Influence of Soft Magnetic Materials Application to Squirrel Cage Induction Motor Design and Performance Engineering Journal 21(1) 193-206 DOI: 10.4186/ej.2017.21.1.193

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 66 66 4
PDF Downloads 61 61 3