Influence analysis of the main types of defects and damages on bearing capacity in reinforced concrete elements and their research methods

Open access

Abstract

In current economic trends, changes in construction using are required. It usually leads to changes in value and type of the working load on building structures, with the requirement to rate the technical state and replace or strengthen the elements. An important aspect of determining the residual bearing capacity of damaged bending reinforced concrete elements is the research concerning the influence of difference defects and damages on the change of strength and deformability. In the article main types of damages and defects, methods of studies of damaged reinforced concrete elements and the expediency of usage of this elements are described. However, most methods are suitable only for certain defects and damages due to the large complexity of calculations and the consideration of multifactoriality. Significant complexity of a single method for calculating damaged elements depends on the possible changing stress strain state of an element in combination with certain defects and damages, the presence of a non-complete separation where during loading or alteration of the damaged element the fractions become included in the work, reinforced concrete is the composite material which carrying complexity in calculating the joint work of its components.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • Bliharsky Z. Ya. R.E. Khmil R. Vashkevich Ya. Z. 2011. The stress-strain state of reinforced concrete beams with local corrosion damage Bulletin of the National University "Lviv Polytechnic"697 Theory and practice of construction 36-41.

  • Kadomtsev M.I. Liapin A.A. Shatylov Yu.Iu. 2012. Vibrodiahnostyka budivelnykh konstruktsii Elektronnyi resurs Inzhenernyi visnyk Dona 3.

  • Khmil R.E. 2009. Strained-deformed state of reinforced concrete beams damaged by aggressive environment Khmil R.E. Vashkevich R.V. Blicharsky Z.Ya. Bulletin of the National University "Lviv Polytechnic" 655 The theory and practice of construction 278-285.

  • Klymenko E.V. 2012. Influence of damage on the strength and deformability of bendable reinforced concrete elements Klymenko E.V. Bulletin of the Odessa State Academy of Civil Engineering and Architecture 51 175-180.

  • Klymenko E.V. 2013. On the study of the work of compressed damaged reinforced concrete elements of round section Klymenko E.V Oreshkovich M. Bulletin of the National University "Lviv Polytechnic" The theory and practice of construction755. 173-178.

  • Klymenko E.V. Cherneva O.S. Dovgan O.D. 2013. Aries Mohammed Ismael Influence of the factors of damaged T beams on the magnitude of their destructive load Intercollegiate collection "SCIENTIFIC NOTES" Lutsk 43 94-97.

  • Klymenko 2014. EV Residual bearing capacity of damaged reinforced concrete beams of the tread profile E.V. Klimenko E.S. Cherneva N.D. Korol M.M. Ismael Aerez I.V. Antonyshina Bulletin of the Odessa State Academy of Civil Engineering and Architecture 54 159-163.

  • Malganov A.I Plevkov V.S. Polischuk. A.I. 1990. Restoration and strengthening of building structures of emergency and reconstructed buildings: atlas of schemes and drawings Tomsk Unt. 1990 456.

  • Normative documents on issues of inspection certification safe and reliable operation of industrial buildings and structures. 1997. Effective from 1997-11-27 K.: State. committee of the building archit. and the Housing Policy of Ukraine Gosnadzoradzorohrantruda of Ukraine 145.

  • Park S. Ahmad S. Yun C.B. Roh Y. Multiple crack detection of concrete structures using impedance-based structural health monitoring techniques Experimental Mechanics 46 609-618.

  • Pavlikov AM. Boyko O.V. 2011. Determination of the inclination angle of the neutral line in the cross sections of oblique concrete concrete elements taking into account the nonlinear properties of concrete on the basis of diagrams of its state A.M. Pavlikov O.V. Boyko Resource-saving materials constructions buildings and structures: Sb. sciences Ave Rivne 21 264 - 269.

  • Petrov O.M. 2015. Cracking and the nature of the destruction of rein-forced concrete elements with bending with torsion O.M. Petrov Building constructions 82 507-518.

  • Puzanov A.V. Ulybin A.V. 2011. Metody obsledovanyiia korrozionnoho sostoianiia armatury zhelezobetonnykh konstruktsyi Inzhenerno-stroitelnyi zhurnal. 7(25) 18-25.

  • RILEM TECHNICAL COMMITTEES 1991. Damage classification of concrete structures The state of the art report of RILEM Technical Committee 104-DCC activity Materials and Structures Matg'riaux et Constructions 24 253-259.

  • SNIP 2.03.01-84 *. 1989. Concrete and reinforced concrete structures M. Tsitp Gosstroya USSR 80.

  • Stepova O.V.. 2011. Method of calculation of sectional area loss due to corrosion of reinforcement in normal cracking of beam reinforced concrete constructions O.V. Stepova Resource-saving materials constructions buildings and structures sciences Ave Rivne 21 346-352.

  • Structures of buildings and structures. Concrete and reinforced concrete constructions. Basic design provisions: DBN V.2.6-98: 2009. Effective from 2011-07-01 K.: Minregionstroy of Ukraine 97 (National Standard of Ukraine).

  • Technical diagnostics. Terms and definitions. GOST 20911-89. 1989. [Effective from 01/01/1991]. M.: GK USSR on product quality management and standards. 132.

  • Verb I.I. Luchko Y.Y. Kovchyk SE. 2002. To the issue of corrosion of concrete and reinforced concrete and their protection. Bulletin of the Lviv Polytechnic National University. The theory and practice of construction 441 WITH 34-39.

  • Voskobinik O.P. 2010. Typological comparison of defects and damages of reinforced concrete metal and steel reinforced concrete structures O.P. Wisemaker Bulletin of the National University "Lviv Polytechnic" The theory and practice of construction 662 97-103.

  • Voskobinik O.P. 2011. Experimental investigations of reinforced concrete beams with defects and damages that cause slanting bends O.P. Voskobianik O.O. Kitayev Ya.V. Makarenko Ye.S. Bugaenko Collection of sciences works (branch machine-building construction) Poltava: PoltNTU1(29) 87-92.

  • Voznesensky V.A. 1981. Static methods of experiment planning in technical and economic research Voznesensky V.A. 2nd ed. Corrected. and add - M: Finance and Statistics 215.

  • Wei Fan Pizhong Qiao. Vibration-based Damage Identification Methods: A Review and Comparative Study Structural Health Monitoring 10(1) 83-111.

  • Yeremenko B.M. 2015. Proektuvannia intelektualnoi systemy dlia diahnostyky tekhnichnoho stanu obiektiv budivnytstva B.M. Yeremenko Tekhnolohycheskyi audyt y rezervы proyzvodstva 1(2) 44-48.

  • Zhuravskaya N.E. 2014. On the issue of biological damage to concrete and reinforced concrete N.E. Zhuravskaya Resource-saving materials structures buildings and structures 28 180-186

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 139 139 37
PDF Downloads 90 90 13