Changes in hardness of magnesium alloys due to precipitation hardening

Open access

Abstract

This paper deals with the evaluation of changes in hardness of magnesium alloys during precipitation hardening that are nowadays widely used in different fields of industry. It focuses exactly on AZ31, AZ61 and AZ91 alloys. Observing material hardness changes serves as an effective tool for determining precipitation hardening parameters, such as temperature and time. Brinell hardness measurement was chosen based on experimental needs. There was also necessary to make chemical composition analysis and to observe the microstructures of tested materials. The obtained results are presented and discussed in this paper.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • BAKER H. Avedesian M.M. 1999. ASM Specialty Handbook: Magnesium and Magnesium Alloys ASM International.

  • Bolibruchová D. Pastirčák R. Sládek A. 2005. Zlievarenská metalurgia-neželezné kovy EDIS Žilina.

  • Chen L. Yuan F. Jiang P. Xie J. Wu X. 2017. Mechanical properties and deformation mechanism of Mg-Al-Zn alloy with gradient microstructure in grain size and orientation Materials Science and Engineering: A 694 98-109 DOI: 10.1016/j.msea.2017.04.005

  • Gu X.N. Zhou W.R. Zheng Y.F. Cheng Y. Wei S.C. Zhong S.P. Xi T.F. Chend L.J. 2010. Corrosion fatigue behaviors of two biomedical Mg alloys – AZ91D and WE43 – In simulated body fluid Acta Biomaterialia 6(12) 4605-4613 DOI: 10.1016/j.actbio.2010.07.026.

  • Hlaváčová I. 2014. Vplyv štruktúrnych faktorov na mechanizmus a morfológiu lomu zliatin horčíka pri statickom a cyklickom zaťažovaní Dizertačná práca SjF ŽU Žilina.

  • Huang G. Liu Q. Wang L. Xin R. Chen X. Pan F. 2008. Microstructure and Texture Evolution of AZ31 Magnesium Alloy During Rolling Transaction of Nonfferrous Metals Society of China 18(1) 170-174 DOI: 10.1016/S1003-6326(10)60196-3.

  • Li J. Liu J. Cui Z. 2015. Microstructures and mechanical properties of AZ61 magnesium alloy after isothermal multidirectional forging with increasing strain rate Materials Science and Engineering: A 643 32-36 DOI: 10.1016/j.msea.2015.07.028.

  • Murugan G. Raghukandan K. Pillai U.T.S. Pai B.C. Mahadevand K. 2009. High cyclic fatigue characteristics of gravity cast AZ91 magnesium alloy subjected to transverse load Materials & Design 30(7) 2636-2641 DOI: 10.1016/j.matdes.2008.10.032.

  • Peng J. Zhang Z. Liu Z. Li Y. Guo P. Zhou W. Wu Y. 2018. The effect of texture and grain size on improving the mechanical properties of Mg-Al-Zn alloys by friction stir processing Scientific Reports 8(4196).

  • WOLF B. FLECK C. EIFLER D. 2004. Characterization of the fatigue behaviour of the magnesium alloy AZ91D by means of mechanical hysteresis and temperature measurements International Journal of Fatigue 26(12) 1357-1363.

  • Yu Z.P. Yan Y.H. Yao J. Wang C. Zha M. Xu X.Y. Liu H. Wang H.Y. Jiang Q.C. 2018. Effect of tensile direction on mechanical properties and microstructural evolutions of rolled Mg-Al-Zn-Sn magnesium alloy sheets at room and elevated temperatures Journal of Alloys and Compounds 744 211-219 DOI: 10.1016/j.jallcom.2018.01.344.

Search
Journal information
Metrics
All Time Past Year Past 30 Days
Abstract Views 0 0 0
Full Text Views 167 167 3
PDF Downloads 93 93 3