The influence of the damaged reinforcing bars on the stress-strain state of the rein-forced concrete beams

Zenoviy Blikharskyy 1 , Taras Shnal 1  and Roman Khmil 1
  • 1 Place Civil Engineering, Department of Roads and Bridges, Lviv Polytechnic National University, Ukraine

Abstract

The article is devoted to the overall view of experimental research of reinforced concrete beams with the simultaneous influence of the corrosion environment and loading. The tests have been carried out upon the reinforced concrete specimens considering the corrosion in the acid environment, namely 10 % H2SO4 that have been taken as a model of the aggressive environment. The beams are with span equalling to 1,9m with different series of tensile armature, concrete compressive strength and different length of impact of corrosion (continuous and local). The influence of simultaneous action of the aggressive environment and loading on strength of reinforced-concrete beams has been described. For a detailed study of the effect of individual components there was suggested additional experimental modelling of the only tensile armature damage without concrete damage. It will investigate the influence of this factor irrespective of the concrete.

If the inline PDF is not rendering correctly, you can download the PDF file here.

  • 1. Brózda K., Selejdak J. 2016. Analiza teoretyczna doboru zbrojenia FRP w belce swobodnie podpartej, VI Konferencja Naukowa SOLINA 2016, Rzeszów - Polańczyk, Polska

  • 2. Fagerlund G. 1997. Trwałość konstrukcji betonowych – Warszawa, Arkady, 95p.

  • 3. Gawron M., Selejdak J., Baszkiewicz K. 2015. Analiza wybranych nowoczesnych systemów antykorozyjnych stosowanych w stalowych konstrukcjach mostowych, In: Różne aspekty jakości materiałów i procesów stosowanych w budownictwie (ed.) Czajkowska A., Politechnika Świętokrzyska, 49-62.

  • 4. Khmil R. 2003. The thesis of PhD “Strength, deformability, cracks resistance of reinforced concrete beams under influence of the aggressive environment”. - Lviv Polytechnic National University, Ukraine, Lviv, – 153p. (in Ukrainian).

  • 5. Klimenko Y.V. 2010. The technical state of buildings and structures. Monograph. Odessa. OGASA, - 284p. (in Ukrainian).

  • 6. Moskvin V.M. 1980. Corrosion of concrete and reinforced concrete construction. – Мoscow., Stroyizdat, – 536p. (in Russian).

  • 7. Podolski B., Suwalski J., Wydra W. 2000. Problemy renowacji starych konstrukcji betonowych i żelbetowych. XII Konferencja Naukowo-Techniczna „KONTRA 2000”, Warszawa-Zakopane, 291-298.

  • 8. Suchan M. 1998. Odporność korozyjna zbrojenia oraz ocean ubytków korozyjnych w konstrukcjach żelbetowych. Konferencja naukowotechniczna “Warsztat pracy projektanta konstrukcji”, Ustroń, 249-261.

  • 9. Vashkevych R. 2005. The thesis of PhD “Strength, deformability, cracks resistance of reinforced concrete beams renewed after influence of the aggressive environment”. - Lviv Polytechnic National University, Ukraine, Lviv, 143p. (in Ukrainian).

  • 10. Verbetskyy G. P, Shapovalov V.J., Saralydze O.A. 1990. Calculation of allowable width of cracks in structures operating in aggressive waters // Concrete and reinforced concrete. №3. - 15-17 (in Russian).

OPEN ACCESS

Journal + Issues

Search